lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250205045152.GB3831@debian>
Date: Wed, 5 Feb 2025 05:51:52 +0100
From: Dimitri Fedrau <dima.fedrau@...il.com>
To: Rob Herring <robh@...nel.org>
Cc: Dimitri Fedrau <dimitri.fedrau@...bherr.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, Andrew Davis <afd@...com>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v3 1/3] dt-bindings: net: ethernet-phy: add
 property tx-amplitude-100base-tx-percent

Am Tue, Feb 04, 2025 at 09:34:09AM -0600 schrieb Rob Herring:
> On Tue, Feb 04, 2025 at 02:09:15PM +0100, Dimitri Fedrau wrote:
> > Add property tx-amplitude-100base-tx-percent in the device tree bindings
> > for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
> > necessary to compensate losses on the PCB and connector, so the voltages
> > measured on the RJ45 pins are conforming.
> > 
> > Signed-off-by: Dimitri Fedrau <dimitri.fedrau@...bherr.com>
> > ---
> >  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > index 2c71454ae8e362e7032e44712949e12da6826070..04f42961035f273990fdf4368ad1352397fc3774 100644
> > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > @@ -232,6 +232,13 @@ properties:
> >        PHY's that have configurable TX internal delays. If this property is
> >        present then the PHY applies the TX delay.
> >  
> > +  tx-amplitude-100base-tx-percent:
> > +    description: |
> 
> Don't need '|' if no formatting to preserve.
>
Wasn't sure about the '|', because some properties use
it(rx-internal-delay-ps or tx-internal-delay-ps) others not. Is it wrong
there ? I don't see any reason to preserve formatting there. Anyway will remove
the '|' as you proposed. Thanks for explaining, didn't know.

Best regards,
Dimitri Fedrau

[...]

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ