[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250206061107.3541537-1-jiande.lu@mediatek.com>
Date: Thu, 6 Feb 2025 14:11:07 +0800
From: Jiande Lu <jiande.lu@...iatek.com>
To: Marcel Holtmann <marcel@...tmann.org>, Johan Hedberg
<johan.hedberg@...il.com>, Luiz Von Dentz <luiz.dentz@...il.com>
CC: Sean Wang <sean.wang@...iatek.com>, Chris Lu <chris.lu@...iatek.com>,
Deren Wu <deren.Wu@...iatek.com>, Aaron Hou <aaron.hou@...iatek.com>, Steve
Lee <steve.lee@...iatek.com>, linux-bluetooth
<linux-bluetooth@...r.kernel.org>, linux-kernel
<linux-kernel@...r.kernel.org>, linux-mediatek
<linux-mediatek@...ts.infradead.org>, Jiande Lu <jiande.lu@...iatek.com>
Subject: [PATCH] Bluetooth: btusb: Add 2 HWIDs for MT7922
Add below HWIDs for MediaTek MT7922 USB Bluetooth chip.
VID 0x0489, PID 0xe152
VID 0x0489, PID 0xe153
Patch has been tested successfully and controller is recognized
device pair successfully.
MT7922 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
Bluetooth: hci0: Device setup in 2284925 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Signed-off-by: Jiande Lu <jiande.lu@...iatek.com>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1caf7a071a73..6db25b8d6d42 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -667,6 +667,10 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe152), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe153), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x04ca, 0x3804), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x04ca, 0x38e4), .driver_info = BTUSB_MEDIATEK |
--
2.45.2
Powered by blists - more mailing lists