lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250206111045.16612-1-quic_akakum@quicinc.com>
Date: Thu, 6 Feb 2025 16:40:27 +0530
From: Akash Kumar <quic_akakum@...cinc.com>
To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Greg Kroah-Hartman
	<gregkh@...uxfoundation.org>,
        Jack Pham <quic_jackp@...cinc.com>, <kernel@...cinc.com>,
        Wesley Cheng <quic_wcheng@...cinc.com>
CC: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio
	<konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        "Vijayavardhan
 Vennapusa" <quic_vvreddy@...cinc.com>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Akash Kumar <quic_akakum@...cinc.com>
Subject: [PATCH 00/18] Reserve high bandwidth for HS isoc eps

It is observed while testing multiple audio devices over usb, a glitch is
observed during testing. As per dwc datasheet,By default, HC reserves 80%
of the bandwidth for periodic EPs which can be increased if needed.

Add quirk to set GUCTL register BIT 16 to accommodate higher bandwidth for
2 isoc eps.

If this bit is set, the bandwidth is relaxed to 85% to accommodate two high
speed, high bandwidth ISOC EPs. USB 2.0 required 80% bandwidth allocated
for ISOC traffic. If two High-bandwidth ISOC devices (HD Webcams) are
connected, and if each requires 1024-bytes X 3 packets per Micro-Frame,
then the bandwidth required is around 82%. If this bit is set, then it is
possible to connect two Webcams of 1024bytes X 3 paylod per Micro-Frame
each. Alternatively, you might need to lower the resolution of the
webcams. This bit is valid in Host and DRD configuration and is used in
host mode operation only.

Set this bit for host mode uvc uac usecases where two isoc eps
are used and uvc flickers or audio glitch is observed.


Akash Kumar (18):
  usb: dwc3: Reserve Higher Bandwidth for HS Periodic EPs
  arm64: dts: qcom: sa8775p: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sm8350: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sm8450: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sm8150: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sm6125: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sm8250: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sm6350: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sc7280: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sdm630: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sdm845: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sdx75: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: qcs404: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sc7180: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: x1e80100: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sc8280xp: Enable high bandwidth for hs isoc eps
  arm64: dts: qcom: sc8180x: Enable high bandwidth for hs isoc eps

 arch/arm64/boot/dts/qcom/qcs404.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/qdu1000.dtsi  |  1 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi  |  3 +++
 arch/arm64/boot/dts/qcom/sc7180.dtsi   |  1 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/sc8180x.dtsi  |  3 +++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi |  3 +++
 arch/arm64/boot/dts/qcom/sdm630.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/sdx75.dtsi    |  1 +
 arch/arm64/boot/dts/qcom/sm6125.dtsi   |  1 +
 arch/arm64/boot/dts/qcom/sm6350.dtsi   |  1 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/sm8250.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/sm8350.dtsi   |  2 ++
 arch/arm64/boot/dts/qcom/sm8450.dtsi   |  1 +
 arch/arm64/boot/dts/qcom/x1e80100.dtsi |  5 +++++
 drivers/usb/dwc3/core.c                | 11 +++++++++++
 drivers/usb/dwc3/core.h                |  4 ++++
 19 files changed, 49 insertions(+)

-- 
2.17.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ