| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250206121803.1128216-5-quic_varada@quicinc.com>
Date: Thu, 6 Feb 2025 17:48:00 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: <lpieralisi@...nel.org>, <kw@...ux.com>,
<manivannan.sadhasivam@...aro.org>, <robh@...nel.org>,
<bhelgaas@...gle.com>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<vkoul@...nel.org>, <kishon@...nel.org>, <andersson@...nel.org>,
<konradybcio@...nel.org>, <p.zabel@...gutronix.de>,
<quic_nsekar@...cinc.com>, <dmitry.baryshkov@...aro.org>,
<quic_varada@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-phy@...ts.infradead.org>
Subject: [PATCH v10 4/7] arm64: dts: qcom: ipq9574: Reorder reg and reg-names
The 'reg' & 'reg-names' constraints used in the bindings and dtsi are
different resulting in dt_bindings_check errors. Re-order the reg entries,
fix the node names and move the nodes to maintain sort order to address the
following errors/warnings.
arch/arm64/boot/dts/qcom/ipq9574-rdp449.dtb: pcie@...00000: reg-names:0: 'parf' was expected
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1045.24-1127.5: Warning (simple_bus_reg): /soc@...cie@...00000: simple-bus unit address format error, expected "88000"
Move the nodes to maintain sort order w.r.t address.
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
---
v10: Move the nodes to maintain sort order w.r.t address.
Fix 'simple-bus unit address format error'
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 837 +++++++++++++-------------
1 file changed, 426 insertions(+), 411 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 942290028972..ab7cb1b5b076 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -239,6 +239,89 @@ rpm_msg_ram: sram@...00 {
reg = <0x00060000 0x6000>;
};
+ pcie0: pci@...00 {
+ compatible = "qcom,pcie-ipq9574";
+ reg = <0x00080000 0x4000>,
+ <0x28000000 0xf1d>,
+ <0x28000f20 0xa8>,
+ <0x28001000 0x1000>,
+ <0x28100000 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>,
+ <0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE0_RCHNG_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_AUX_CLK>;
+ clock-names = "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng",
+ "ahb",
+ "aux";
+
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_S_ARES>,
+ <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_M_ARES>,
+ <&gcc GCC_PCIE0_AUX_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>;
+ reset-names = "pipe",
+ "sticky",
+ "axi_s_sticky",
+ "axi_s",
+ "axi_m_sticky",
+ "axi_m",
+ "aux",
+ "ahb";
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+ interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+ <&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+ status = "disabled";
+ };
+
pcie0_phy: phy@...00 {
compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
reg = <0x00084000 0x1000>;
@@ -262,6 +345,90 @@ pcie0_phy: phy@...00 {
status = "disabled";
};
+ pcie2: pcie@...00 {
+ compatible = "qcom,pcie-ipq9574";
+ reg = <0x00088000 0x4000>,
+ <0x20000000 0xf1d>,
+ <0x20000f20 0xa8>,
+ <0x20001000 0x1000>,
+ <0x20100000 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>,
+ <0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>;
+
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+ <&gcc GCC_PCIE2_AXI_S_CLK>,
+ <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE2_RCHNG_CLK>,
+ <&gcc GCC_PCIE2_AHB_CLK>,
+ <&gcc GCC_PCIE2_AUX_CLK>;
+ clock-names = "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng",
+ "ahb",
+ "aux";
+
+ resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+ <&gcc GCC_PCIE2_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>,
+ <&gcc GCC_PCIE2_AXI_S_ARES>,
+ <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>,
+ <&gcc GCC_PCIE2_AXI_M_ARES>,
+ <&gcc GCC_PCIE2_AUX_ARES>,
+ <&gcc GCC_PCIE2_AHB_ARES>;
+ reset-names = "pipe",
+ "sticky",
+ "axi_s_sticky",
+ "axi_s",
+ "axi_m_sticky",
+ "axi_m",
+ "aux",
+ "ahb";
+
+ phys = <&pcie2_phy>;
+ phy-names = "pciephy";
+ interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+ <&gcc MASTER_SNOC_PCIE2 &gcc SLAVE_SNOC_PCIE2>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+ status = "disabled";
+ };
+
pcie2_phy: phy@...00 {
compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
reg = <0x0008c000 0x2000>;
@@ -285,13 +452,6 @@ pcie2_phy: phy@...00 {
status = "disabled";
};
- rng: rng@...00 {
- compatible = "qcom,ipq9574-trng", "qcom,trng";
- reg = <0x000e3000 0x1000>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
-
mdio: mdio@...00 {
compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio";
reg = <0x00090000 0x64>;
@@ -302,52 +462,6 @@ mdio: mdio@...00 {
status = "disabled";
};
- pcie3_phy: phy@...00 {
- compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
- reg = <0x000f4000 0x2000>;
-
- clocks = <&gcc GCC_PCIE3_AUX_CLK>,
- <&gcc GCC_PCIE3_AHB_CLK>,
- <&gcc GCC_PCIE3_PIPE_CLK>;
- clock-names = "aux", "cfg_ahb", "pipe";
-
- assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
- assigned-clock-rates = <20000000>;
-
- resets = <&gcc GCC_PCIE3_PHY_BCR>,
- <&gcc GCC_PCIE3PHY_PHY_BCR>;
- reset-names = "phy", "common";
-
- #clock-cells = <0>;
- clock-output-names = "gcc_pcie3_pipe_clk_src";
-
- #phy-cells = <0>;
- status = "disabled";
- };
-
- pcie1_phy: phy@...00 {
- compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
- reg = <0x000fc000 0x1000>;
-
- clocks = <&gcc GCC_PCIE1_AUX_CLK>,
- <&gcc GCC_PCIE1_AHB_CLK>,
- <&gcc GCC_PCIE1_PIPE_CLK>;
- clock-names = "aux", "cfg_ahb", "pipe";
-
- assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
- assigned-clock-rates = <20000000>;
-
- resets = <&gcc GCC_PCIE1_PHY_BCR>,
- <&gcc GCC_PCIE1PHY_PHY_BCR>;
- reset-names = "phy", "common";
-
- #clock-cells = <0>;
- clock-output-names = "gcc_pcie1_pipe_clk_src";
-
- #phy-cells = <0>;
- status = "disabled";
- };
-
cmn_pll: clock-controller@...00 {
compatible = "qcom,ipq9574-cmn-pll";
reg = <0x0009b000 0x800>;
@@ -372,48 +486,269 @@ cpu_speed_bin: cpu-speed-bin@15 {
};
};
- cryptobam: dma-controller@...000 {
- compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
- reg = <0x00704000 0x20000>;
- interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- qcom,ee = <1>;
- qcom,controlled-remotely;
- };
-
- crypto: crypto@...000 {
- compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
- reg = <0x0073a000 0x6000>;
- clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
- <&gcc GCC_CRYPTO_AXI_CLK>,
- <&gcc GCC_CRYPTO_CLK>;
- clock-names = "iface", "bus", "core";
- dmas = <&cryptobam 2>, <&cryptobam 3>;
- dma-names = "rx", "tx";
+ rng: rng@...00 {
+ compatible = "qcom,ipq9574-trng", "qcom,trng";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
};
- tsens: thermal-sensor@...000 {
- compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
- reg = <0x004a9000 0x1000>,
- <0x004a8000 0x1000>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "combined";
- #qcom,sensors = <16>;
- #thermal-sensor-cells = <1>;
- };
+ pcie3: pcie@...00 {
+ compatible = "qcom,pcie-ipq9574";
+ reg = <0x000f0000 0x4000>,
+ <0x18000000 0xf1d>,
+ <0x18000f20 0xa8>,
+ <0x18001000 0x1000>,
+ <0x18100000 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <3>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
- tlmm: pinctrl@...0000 {
- compatible = "qcom,ipq9574-tlmm";
- reg = <0x01000000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 65>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,
+ <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>;
- uart2_pins: uart2-state {
- pins = "gpio34", "gpio35";
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+ <&gcc GCC_PCIE3_AXI_S_CLK>,
+ <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE3_RCHNG_CLK>,
+ <&gcc GCC_PCIE3_AHB_CLK>,
+ <&gcc GCC_PCIE3_AUX_CLK>;
+ clock-names = "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng",
+ "ahb",
+ "aux";
+
+ resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+ <&gcc GCC_PCIE3_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>,
+ <&gcc GCC_PCIE3_AXI_S_ARES>,
+ <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>,
+ <&gcc GCC_PCIE3_AXI_M_ARES>,
+ <&gcc GCC_PCIE3_AUX_ARES>,
+ <&gcc GCC_PCIE3_AHB_ARES>;
+ reset-names = "pipe",
+ "sticky",
+ "axi_s_sticky",
+ "axi_s",
+ "axi_m_sticky",
+ "axi_m",
+ "aux",
+ "ahb";
+
+ phys = <&pcie3_phy>;
+ phy-names = "pciephy";
+ interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+ <&gcc MASTER_SNOC_PCIE3 &gcc SLAVE_SNOC_PCIE3>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+ status = "disabled";
+ };
+
+ pcie3_phy: phy@...00 {
+ compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+ reg = <0x000f4000 0x2000>;
+
+ clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+ <&gcc GCC_PCIE3_AHB_CLK>,
+ <&gcc GCC_PCIE3_PIPE_CLK>;
+ clock-names = "aux", "cfg_ahb", "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+ assigned-clock-rates = <20000000>;
+
+ resets = <&gcc GCC_PCIE3_PHY_BCR>,
+ <&gcc GCC_PCIE3PHY_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ #clock-cells = <0>;
+ clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ pcie1: pcie@...00 {
+ compatible = "qcom,pcie-ipq9574";
+ reg = <0x000f8000 0x4000>,
+ <0x10000000 0xf1d>,
+ <0x10000f20 0xa8>,
+ <0x10001000 0x1000>,
+ <0x10100000 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>,
+ <0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>;
+
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+ <&gcc GCC_PCIE1_RCHNG_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>,
+ <&gcc GCC_PCIE1_AUX_CLK>;
+ clock-names = "axi_m",
+ "axi_s",
+ "axi_bridge",
+ "rchng",
+ "ahb",
+ "aux";
+
+ resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+ <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_S_ARES>,
+ <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_M_ARES>,
+ <&gcc GCC_PCIE1_AUX_ARES>,
+ <&gcc GCC_PCIE1_AHB_ARES>;
+ reset-names = "pipe",
+ "sticky",
+ "axi_s_sticky",
+ "axi_s",
+ "axi_m_sticky",
+ "axi_m",
+ "aux",
+ "ahb";
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+ interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>,
+ <&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@...00 {
+ compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+ reg = <0x000fc000 0x1000>;
+
+ clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>,
+ <&gcc GCC_PCIE1_PIPE_CLK>;
+ clock-names = "aux", "cfg_ahb", "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+ assigned-clock-rates = <20000000>;
+
+ resets = <&gcc GCC_PCIE1_PHY_BCR>,
+ <&gcc GCC_PCIE1PHY_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ #clock-cells = <0>;
+ clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ cryptobam: dma-controller@...000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0x00704000 0x20000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@...000 {
+ compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+ reg = <0x0073a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ };
+
+ tsens: thermal-sensor@...000 {
+ compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
+ reg = <0x004a9000 0x1000>,
+ <0x004a8000 0x1000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tlmm: pinctrl@...0000 {
+ compatible = "qcom,ipq9574-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 65>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart2_pins: uart2-state {
+ pins = "gpio34", "gpio35";
function = "blsp2_uart";
drive-strength = <8>;
bias-disable;
@@ -873,326 +1208,6 @@ frame@...8000 {
status = "disabled";
};
};
-
- pcie1: pcie@...00000 {
- compatible = "qcom,pcie-ipq9574";
- reg = <0x10000000 0xf1d>,
- <0x10000f20 0xa8>,
- <0x10001000 0x1000>,
- <0x000f8000 0x4000>,
- <0x10100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <1>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>,
- <0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>;
-
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0",
- "msi1",
- "msi2",
- "msi3",
- "msi4",
- "msi5",
- "msi6",
- "msi7";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
- <&gcc GCC_PCIE1_AXI_S_CLK>,
- <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
- <&gcc GCC_PCIE1_RCHNG_CLK>,
- <&gcc GCC_PCIE1_AHB_CLK>,
- <&gcc GCC_PCIE1_AUX_CLK>;
- clock-names = "axi_m",
- "axi_s",
- "axi_bridge",
- "rchng",
- "ahb",
- "aux";
-
- resets = <&gcc GCC_PCIE1_PIPE_ARES>,
- <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>,
- <&gcc GCC_PCIE1_AXI_S_ARES>,
- <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>,
- <&gcc GCC_PCIE1_AXI_M_ARES>,
- <&gcc GCC_PCIE1_AUX_ARES>,
- <&gcc GCC_PCIE1_AHB_ARES>;
- reset-names = "pipe",
- "sticky",
- "axi_s_sticky",
- "axi_s",
- "axi_m_sticky",
- "axi_m",
- "aux",
- "ahb";
-
- phys = <&pcie1_phy>;
- phy-names = "pciephy";
- interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>,
- <&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>;
- interconnect-names = "pcie-mem", "cpu-pcie";
- status = "disabled";
- };
-
- pcie3: pcie@...00000 {
- compatible = "qcom,pcie-ipq9574";
- reg = <0x18000000 0xf1d>,
- <0x18000f20 0xa8>,
- <0x18001000 0x1000>,
- <0x000f0000 0x4000>,
- <0x18100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <3>;
- bus-range = <0x00 0xff>;
- num-lanes = <2>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,
- <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>;
-
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0",
- "msi1",
- "msi2",
- "msi3",
- "msi4",
- "msi5",
- "msi6",
- "msi7";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
- <&gcc GCC_PCIE3_AXI_S_CLK>,
- <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
- <&gcc GCC_PCIE3_RCHNG_CLK>,
- <&gcc GCC_PCIE3_AHB_CLK>,
- <&gcc GCC_PCIE3_AUX_CLK>;
- clock-names = "axi_m",
- "axi_s",
- "axi_bridge",
- "rchng",
- "ahb",
- "aux";
-
- resets = <&gcc GCC_PCIE3_PIPE_ARES>,
- <&gcc GCC_PCIE3_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>,
- <&gcc GCC_PCIE3_AXI_S_ARES>,
- <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>,
- <&gcc GCC_PCIE3_AXI_M_ARES>,
- <&gcc GCC_PCIE3_AUX_ARES>,
- <&gcc GCC_PCIE3_AHB_ARES>;
- reset-names = "pipe",
- "sticky",
- "axi_s_sticky",
- "axi_s",
- "axi_m_sticky",
- "axi_m",
- "aux",
- "ahb";
-
- phys = <&pcie3_phy>;
- phy-names = "pciephy";
- interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
- <&gcc MASTER_SNOC_PCIE3 &gcc SLAVE_SNOC_PCIE3>;
- interconnect-names = "pcie-mem", "cpu-pcie";
- status = "disabled";
- };
-
- pcie2: pcie@...00000 {
- compatible = "qcom,pcie-ipq9574";
- reg = <0x20000000 0xf1d>,
- <0x20000f20 0xa8>,
- <0x20001000 0x1000>,
- <0x00088000 0x4000>,
- <0x20100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <2>;
- bus-range = <0x00 0xff>;
- num-lanes = <2>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>,
- <0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>;
-
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0",
- "msi1",
- "msi2",
- "msi3",
- "msi4",
- "msi5",
- "msi6",
- "msi7";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
- <&gcc GCC_PCIE2_AXI_S_CLK>,
- <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
- <&gcc GCC_PCIE2_RCHNG_CLK>,
- <&gcc GCC_PCIE2_AHB_CLK>,
- <&gcc GCC_PCIE2_AUX_CLK>;
- clock-names = "axi_m",
- "axi_s",
- "axi_bridge",
- "rchng",
- "ahb",
- "aux";
-
- resets = <&gcc GCC_PCIE2_PIPE_ARES>,
- <&gcc GCC_PCIE2_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>,
- <&gcc GCC_PCIE2_AXI_S_ARES>,
- <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>,
- <&gcc GCC_PCIE2_AXI_M_ARES>,
- <&gcc GCC_PCIE2_AUX_ARES>,
- <&gcc GCC_PCIE2_AHB_ARES>;
- reset-names = "pipe",
- "sticky",
- "axi_s_sticky",
- "axi_s",
- "axi_m_sticky",
- "axi_m",
- "aux",
- "ahb";
-
- phys = <&pcie2_phy>;
- phy-names = "pciephy";
- interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
- <&gcc MASTER_SNOC_PCIE2 &gcc SLAVE_SNOC_PCIE2>;
- interconnect-names = "pcie-mem", "cpu-pcie";
- status = "disabled";
- };
-
- pcie0: pci@...00000 {
- compatible = "qcom,pcie-ipq9574";
- reg = <0x28000000 0xf1d>,
- <0x28000f20 0xa8>,
- <0x28001000 0x1000>,
- <0x00080000 0x4000>,
- <0x28100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>,
- <0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0",
- "msi1",
- "msi2",
- "msi3",
- "msi4",
- "msi5",
- "msi6",
- "msi7";
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
- <&gcc GCC_PCIE0_AXI_S_CLK>,
- <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
- <&gcc GCC_PCIE0_RCHNG_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>,
- <&gcc GCC_PCIE0_AUX_CLK>;
- clock-names = "axi_m",
- "axi_s",
- "axi_bridge",
- "rchng",
- "ahb",
- "aux";
-
- resets = <&gcc GCC_PCIE0_PIPE_ARES>,
- <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>,
- <&gcc GCC_PCIE0_AXI_S_ARES>,
- <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>,
- <&gcc GCC_PCIE0_AXI_M_ARES>,
- <&gcc GCC_PCIE0_AUX_ARES>,
- <&gcc GCC_PCIE0_AHB_ARES>;
- reset-names = "pipe",
- "sticky",
- "axi_s_sticky",
- "axi_s",
- "axi_m_sticky",
- "axi_m",
- "aux",
- "ahb";
-
- phys = <&pcie0_phy>;
- phy-names = "pciephy";
- interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
- <&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>;
- interconnect-names = "pcie-mem", "cpu-pcie";
- status = "disabled";
- };
-
};
thermal-zones {
--
2.34.1
Powered by blists - more mailing lists