linux-kernel - [PATCH net-next 09/13] net: phy: marvell10g: Support SFP through phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250207223634.600218-10-maxime.chevallier@bootlin.com>
Date: Fri,  7 Feb 2025 23:36:28 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org,
	thomas.petazzoni@...tlin.com,
	Andrew Lunn <andrew@...n.ch>,
	Jakub Kicinski <kuba@...nel.org>,
	Eric Dumazet <edumazet@...gle.com>,
	Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>,
	linux-arm-kernel@...ts.infradead.org,
	Christophe Leroy <christophe.leroy@...roup.eu>,
	Herve Codina <herve.codina@...tlin.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Vladimir Oltean <vladimir.oltean@....com>,
	Köry Maincent <kory.maincent@...tlin.com>,
	Marek Behún <kabel@...nel.org>,
	Oleksij Rempel <o.rempel@...gutronix.de>,
	Nicolò Veronese <nicveronese@...il.com>,
	Simon Horman <horms@...nel.org>,
	mwojtas@...omium.org,
	Antoine Tenart <atenart@...nel.org>,
	devicetree@...r.kernel.org,
	Conor Dooley <conor+dt@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Romain Gantois <romain.gantois@...tlin.com>
Subject: [PATCH net-next 09/13] net: phy: marvell10g: Support SFP through phy_port

Convert the Marvell10G driver to use the generic SFP handling, through a
dedicated .attach_port() handler to populate the port's supported
interfaces. As there's no logic to setup the interface for now (as only
10GBaseR is supported for serdes line interfaces), no extra logic is
required.

Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
 drivers/net/phy/marvell10g.c | 37 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 623bdb8466b8..4a66694e49bb 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -28,7 +28,7 @@
 #include <linux/hwmon.h>
 #include <linux/marvell_phy.h>
 #include <linux/phy.h>
-#include <linux/sfp.h>
+#include <linux/phy_port.h>
 #include <linux/netdevice.h>
 
 #define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
@@ -483,36 +483,23 @@ static int mv3310_set_edpd(struct phy_device *phydev, u16 edpd)
 	return err;
 }
 
-static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+static int mv3310_attach_port(struct phy_device *phydev, struct phy_port *port)
 {
-	struct phy_device *phydev = upstream;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-	DECLARE_PHY_INTERFACE_MASK(interfaces);
-	phy_interface_t iface;
+	/* Nothing special to do to handle non-serdes ports */
+	if (!port->is_serdes)
+		return 0;
 
-	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
-	iface = sfp_select_interface(phydev->sfp_bus, support);
+	__set_bit(PHY_INTERFACE_MODE_10GBASER, port->interfaces);
 
-	if (iface != PHY_INTERFACE_MODE_10GBASER) {
-		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-		return -EINVAL;
-	}
 	return 0;
 }
 
-static const struct sfp_upstream_ops mv3310_sfp_ops = {
-	.attach = phy_sfp_attach,
-	.detach = phy_sfp_detach,
-	.connect_phy = phy_sfp_connect_phy,
-	.disconnect_phy = phy_sfp_disconnect_phy,
-	.module_insert = mv3310_sfp_insert,
-};
-
 static int mv3310_probe(struct phy_device *phydev)
 {
 	const struct mv3310_chip *chip = to_mv3310_chip(phydev);
 	struct mv3310_priv *priv;
 	u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
 	int ret;
 
 	if (!phydev->is_c45 ||
@@ -563,9 +550,13 @@ static int mv3310_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	__set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+
 	chip->init_supported_interfaces(priv->supported_interfaces);
 
-	return phy_sfp_probe(phydev, &mv3310_sfp_ops);
+	phydev->max_n_ports = 2;
+
+	return 0;
 }
 
 static void mv3310_remove(struct phy_device *phydev)
@@ -1422,6 +1413,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.set_loopback	= genphy_c45_loopback,
 		.get_wol	= mv3110_get_wol,
 		.set_wol	= mv3110_set_wol,
+		.attach_port	= mv3310_attach_port,
 	},
 	{
 		.phy_id		= MARVELL_PHY_ID_88X3310,
@@ -1441,6 +1433,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.set_tunable	= mv3310_set_tunable,
 		.remove		= mv3310_remove,
 		.set_loopback	= genphy_c45_loopback,
+		.attach_port	= mv3310_attach_port,
 	},
 	{
 		.phy_id		= MARVELL_PHY_ID_88E2110,
@@ -1461,6 +1454,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.set_loopback	= genphy_c45_loopback,
 		.get_wol	= mv3110_get_wol,
 		.set_wol	= mv3110_set_wol,
+		.attach_port	= mv3310_attach_port,
 	},
 	{
 		.phy_id		= MARVELL_PHY_ID_88E2110,
@@ -1479,6 +1473,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.set_tunable	= mv3310_set_tunable,
 		.remove		= mv3310_remove,
 		.set_loopback	= genphy_c45_loopback,
+		.attach_port	= mv3310_attach_port,
 	},
 };
 
-- 
2.48.1