| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Z6pV4eauZj75+911@lizhi-Precision-Tower-5810>
Date: Mon, 10 Feb 2025 14:39:13 -0500
From: Frank Li <Frank.li@....com>
To: j.ne@...teo.net
Cc: devicetree@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
Krzysztof Kozlowski <krzk@...nel.org>, imx@...ts.linux.dev,
Scott Wood <oss@...error.net>,
Madhavan Srinivasan <maddy@...ux.ibm.com>,
Michael Ellerman <mpe@...erman.id.au>,
Nicholas Piggin <npiggin@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Naveen N Rao <naveen@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Damien Le Moal <dlemoal@...nel.org>,
Niklas Cassel <cassel@...nel.org>,
Herbert Xu <herbert@...dor.apana.org.au>,
"David S. Miller" <davem@...emloft.net>, Lee Jones <lee@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
J. Neuschäfer <j.neuschaefer@....net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>, Mark Brown <broonie@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>, linux-kernel@...r.kernel.org,
linux-ide@...r.kernel.org, linux-crypto@...r.kernel.org,
dmaengine@...r.kernel.org, linux-pci@...r.kernel.org,
linux-watchdog@...r.kernel.org, linux-spi@...r.kernel.org,
linux-mtd@...ts.infradead.org
Subject: Re: [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma to YAML
On Fri, Feb 07, 2025 at 10:30:22PM +0100, J. Neuschäfer via B4 Relay wrote:
> From: "J. Neuschäfer" <j.ne@...teo.net>
>
> The devicetree bindings for Freescale DMA engines have so far existed as
> a text file. This patch converts them to YAML, and specifies all the
> compatible strings currently in use in arch/powerpc/boot/dts.
>
> Signed-off-by: J. Neuschäfer <j.ne@...teo.net>
> ---
>
> V2:
> - remove unnecessary multiline markers
> - fix additionalProperties to always be false
> - add description/maxItems to interrupts
> - add missing #address-cells/#size-cells properties
> - convert "Note on DMA channel compatible properties" to YAML by listing
> fsl,ssi-dma-channel as a valid compatible value
> - fix property ordering in examples: compatible and reg come first
> - add missing newlines in examples
> - trim subject line (remove "bindings")
> ---
> .../devicetree/bindings/dma/fsl,elo-dma.yaml | 140 ++++++++++++++
> .../devicetree/bindings/dma/fsl,elo3-dma.yaml | 123 +++++++++++++
> .../devicetree/bindings/dma/fsl,eloplus-dma.yaml | 134 ++++++++++++++
> .../devicetree/bindings/powerpc/fsl/dma.txt | 204 ---------------------
> 4 files changed, 397 insertions(+), 204 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..3d8be9973fb98891a73cb701c1f983a63f444837
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/fsl,elo-dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale Elo DMA Controller
> +
> +maintainers:
> + - J. Neuschäfer <j.ne@...teo.net>
> +
> +description:
> + This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
> + series chips such as mpc8315, mpc8349, mpc8379 etc.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - fsl,mpc8313-dma
> + - fsl,mpc8315-dma
> + - fsl,mpc8323-dma
> + - fsl,mpc8347-dma
> + - fsl,mpc8349-dma
> + - fsl,mpc8360-dma
> + - fsl,mpc8377-dma
> + - fsl,mpc8378-dma
> + - fsl,mpc8379-dma
> + - const: fsl,elo-dma
> +
> + reg:
> + maxItems: 1
> + description:
> + DMA General Status Register, i.e. DGSR which contains status for
> + all the 4 DMA channels.
needn't maxItems
items:
- description: DMA ...
> +
> + cell-index:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Controller index. 0 for controller @ 0x8100.
> +
> + ranges: true
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + interrupts:
> + maxItems: 1
> + description: Controller interrupt.
Needn't description because no any additional informaiton.
> +
> +required:
> + - compatible
> + - reg
> +
> +patternProperties:
> + "^dma-channel@.*$":
> + type: object
> + additionalProperties: false
> +
> + properties:
> + compatible:
> + oneOf:
> + # native DMA channel
> + - items:
> + - enum:
> + - fsl,mpc8315-dma-channel
> + - fsl,mpc8323-dma-channel
> + - fsl,mpc8347-dma-channel
> + - fsl,mpc8349-dma-channel
> + - fsl,mpc8360-dma-channel
> + - fsl,mpc8377-dma-channel
> + - fsl,mpc8378-dma-channel
> + - fsl,mpc8379-dma-channel
> + - const: fsl,elo-dma-channel
> +
> + # audio DMA channel, see fsl,ssi.yaml
> + - const: fsl,ssi-dma-channel
> +
> + reg:
> + maxItems: 1
> +
> + cell-index:
> + description: DMA channel index starts at 0.
> +
> + interrupts:
> + maxItems: 1
> + description:
> + Per-channel interrupt. Only necessary if no controller interrupt has
> + been provided.
> +
> +additionalProperties: false
Need ref to dma-common.yaml?
> +
> +examples:
> + - |
> + dma@...8 {
> + compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
> + reg = <0x82a8 4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x8100 0x1a4>;
> + interrupt-parent = <&ipic>;
> + interrupts = <71 8>;
> + cell-index = <0>;
> +
> + dma-channel@0 {
> + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
> + reg = <0 0x80>;
> + cell-index = <0>;
> + interrupt-parent = <&ipic>;
> + interrupts = <71 8>;
'8', use predefine MACRO for irq type.
Frank
> + };
> +
> + dma-channel@80 {
> + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupt-parent = <&ipic>;
> + interrupts = <71 8>;
> + };
> +
> + dma-channel@100 {
> + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupt-parent = <&ipic>;
> + interrupts = <71 8>;
> + };
> +
> + dma-channel@180 {
> + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupt-parent = <&ipic>;
> + interrupts = <71 8>;
> + };
> + };
> +
...
> --
> 2.48.0.rc1.219.gb6b6757d772
>
>
Powered by blists - more mailing lists