[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <Z6mpIpjM1l5vT49W@eichest-laptop>
Date: Mon, 10 Feb 2025 08:22:10 +0100
From: Stefan Eichenberger <eichest@...il.com>
To: Dimitri Fedrau <dima.fedrau@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Niklas Söderlund <niklas.soderlund+renesas@...natech.se>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v2] net: phy: marvell-88q2xxx: Add support for
PHY LEDs on 88q2xxx
Hi Dimitri,
On Sun, Feb 09, 2025 at 09:41:35AM +0100, Dimitri Fedrau wrote:
> Hi Stefan,
>
> Am Sat, Feb 08, 2025 at 05:44:26PM +0100 schrieb Stefan Eichenberger:
> > On Fri, Feb 07, 2025 at 05:24:20PM +0100, Dimitri Fedrau wrote:
> > > Marvell 88Q2XXX devices support up to two configurable Light Emitting
> > > Diode (LED). Add minimal LED controller driver supporting the most common
> > > uses with the 'netdev' trigger.
> > >
> > > Signed-off-by: Dimitri Fedrau <dima.fedrau@...il.com>
> >
> > Reviewed-by: Stefan Eichenberger <eichest@...il.com>
> >
>
> thanks for reviewing. I just noticed that led0 is enabled in
> mv88q222x_config_init, but I think it should be enabled in
> mv88q2xxx_config_init because LED configuration is same for all
> mv88q2xxx devices. What do you think ?
I think you are right. If you can move that to mv88q2xxx_config_init it
would be great. You can add my Reviewed-by tag to the updated patch.
Thanks,
Stefan
Powered by blists - more mailing lists