linux-kernel - [PATCH v6 0/4] PCI: dwc: Add support for configuring lane equalization presets

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250210-preset_v6-v6-0-cbd837d0028d@oss.qualcomm.com>
Date: Mon, 10 Feb 2025 12:59:59 +0530
From: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>, Jingoo Han <jingoohan1@...il.com>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        quic_mrana@...cinc.com, quic_vbadigan@...cinc.com,
        Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
Subject: [PATCH v6 0/4] PCI: dwc: Add support for configuring lane
 equalization presets

PCIe equalization presets are predefined settings used to optimize
signal integrity by compensating for signal loss and distortion in
high-speed data transmission.

As per PCIe spec 6.0.1 revision section 8.3.3.3 & 4.2.4 for data rates
of 8.0 GT/s, 16.0 GT/s, 32.0 GT/s, and 64.0 GT/s, there is a way to
configure lane equalization presets for each lane to enhance the PCIe
link reliability. Each preset value represents a different combination
of pre-shoot and de-emphasis values. For each data rate, different
registers are defined: for 8.0 GT/s, registers are defined in section
7.7.3.4; for 16.0 GT/s, in section 7.7.5.9, etc. The 8.0 GT/s rate has
an extra receiver preset hint, requiring 16 bits per lane, while the
remaining data rates use 8 bits per lane.

Based on the number of lanes and the supported data rate, read the
device tree property and stores in the presets structure.

Based upon the lane width and supported data rate update lane
equalization registers.

This patch depends on the this dt binding pull request which got recently
merged: https://github.com/devicetree-org/dt-schema/pull/146

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
---
Changes in v6:
- update the dt properties to match the lane width ( mani & konard)
- move everything to helper function and let the helper function
  determine reg size and offset (mani)
- update the function header (mani)
- move the num_lanes check to the main function (mani)
- Link to v5: https://lore.kernel.org/linux-kernel/20250128-preset_v2-v5-0-4d230d956f8c@oss.qualcomm.com/

Changes in v5:
- Instead of using of_property_present use return value of
  of_property_read_u8_array to know about property is present or not and
  add a macro for reserved value(Konrad).
- Link to v4: https://lore.kernel.org/r/20250124-preset_v2-v4-0-0b512cad08e1@oss.qualcomm.com

Changes in v4:
- use static arrays for storing preset values and use default value 0xff
  to indicate the property is not present (Dimitry & konrad).
- Link to v3: https://lore.kernel.org/r/20241223-preset_v2-v3-0-a339f475caf5@oss.qualcomm.com

Changes in v3:
- In previous series a wrong patch was attached, correct it
- Link to v2: https://lore.kernel.org/r/20241212-preset_v2-v2-0-210430fbcd8a@oss.qualcomm.com

Changes in v2:
- Fix the kernel test robot error
- As suggested by konrad use for loop and read "eq-presets-%ugts", (8 << i)
- Link to v1: https://lore.kernel.org/r/20241116-presets-v1-0-878a837a4fee@quicinc.com

---
Krishna Chaitanya Chundru (4):
      arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
      PCI: of: Add API to retrieve equalization presets from device tree
      PCI: dwc: Improve handling of PCIe lane configuration
      PCI: dwc: Add support for configuring lane equalization presets

 arch/arm64/boot/dts/qcom/x1e80100.dtsi            | 13 ++++++
 drivers/pci/controller/dwc/pcie-designware-host.c | 56 +++++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.c      | 11 ++++-
 drivers/pci/controller/dwc/pcie-designware.h      |  4 ++
 drivers/pci/of.c                                  | 43 +++++++++++++++++
 drivers/pci/pci.h                                 | 27 ++++++++++-
 include/uapi/linux/pci_regs.h                     |  3 ++
 7 files changed, 155 insertions(+), 2 deletions(-)
---
base-commit: 3175967ecb3266d0ad7d2ca7ccceaf15fa2f15e2
change-id: 20250210-preset_v6-1e7f560d13ad

Best regards,
-- 
Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>