[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6136272.lOV4Wx5bFT@steina-w>
Date: Mon, 10 Feb 2025 11:42:09 +0100
From: Alexander Stein <alexander.stein@...tq-group.com>
To: Herve Codina <herve.codina@...tlin.com>
Cc: Andrzej Hajda <andrzej.hajda@...el.com>, Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>, Laurent Pinchart <Laurent.pinchart@...asonboard.com>, Jonas Karlman <jonas@...boo.se>, Jernej Skrabec <jernej.skrabec@...il.com>, David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>, Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Dave Stevenson <dave.stevenson@...pberrypi.com>, Maíra Canal <mcanal@...lia.com>, Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>, Marek Vasut <marex@...x.de>, dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Louis Chauvet <louis.chauvet@...tlin.com>, Luca Ceresoli <luca.ceresoli@...tlin.com>, Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v5 4/4] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
Hi Herve,
Am Freitag, 7. Februar 2025, 19:08:16 CET schrieb Herve Codina:
> Hi Alexander,
>
> On Thu, 06 Feb 2025 16:39:09 +0100
> Alexander Stein <alexander.stein@...tq-group.com> wrote:
>
> > Hi Herve,
> >
> > Am Donnerstag, 6. Februar 2025, 16:20:48 CET schrieb Herve Codina:
> > > Hi Alexander,
> > >
> > > On Thu, 06 Feb 2025 15:38:42 +0100
> > > Alexander Stein <alexander.stein@...tq-group.com> wrote:
> > >
> > > ...
> > > > With interrupt configured I got the following stack trace upon
> > > > reboot/poweroff:
> > > >
> > > > [ 91.317264] sn65dsi83 2-002d: reset the pipe
> > > > [ 91.344093] Unable to handle ke
> > > > ** replaying previous printk message **
> > > > [ 91.344093] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
> > > ...
> > >
> > > Ouch :(
> > >
> > > One question to help me investigating:
> > > Do you have the issue at init/probe or when you start to display graphics?
> >
> > This is during shutdown/poweroff. I assume that regmap_reg() in
> > sn65dsi83_handle_errors() fails and because of that reset_work is scheduled.
> >
>
> Found the issue.
>
> Can you give me following information so that I can validate what I
> understood:
> - Is your interrupt line connected directly to the SoC?
No, unfortunately not. It's connected to a GPIO expander, which in turn
delivers an IRQ to the SoC. In between the bridge and the expander is a
buffer for voltage switch (1V8 -> 3V3).
> - Is there any pullup/pulldown on your interrupt line?
As far a I can tell, there is no pullup/pulldown on the IRQ line to
the buffer.
> - In your devicetree what is the configuration used for this interrupt in
> terms of level or edge.
As this line is connected to an expander (pca9555) only edge triggered
interrupts are supported.
> Anyway, I will send a fix in the next iteration.
Thanks for digging into this.
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Powered by blists - more mailing lists