[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4a232b8e-f63e-4f89-aa4e-257165150549@oss.qualcomm.com>
Date: Tue, 11 Feb 2025 14:31:14 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Danila Tikhonov <danila@...xyga.com>, neil.armstrong@...aro.org,
quic_jesszhan@...cinc.com, maarten.lankhorst@...ux.intel.com,
mripard@...nel.org, tzimmermann@...e.de, airlied@...il.com,
simona@...ll.ch, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, andersson@...nel.org, konradybcio@...nel.org,
robdclark@...il.com, quic_abhinavk@...cinc.com,
dmitry.baryshkov@...aro.org, sean@...rly.run,
marijn.suijten@...ainline.org, jonathan@...ek.ca, jun.nie@...aro.org,
fekz115@...il.com
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, linux@...nlining.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH 4/4] arm64: dts: qcom: sm7325-nothing-spacewar: Enable
panel and GPU
On 3.02.2025 7:14 PM, Danila Tikhonov wrote:
> From: Eugene Lepshy <fekz115@...il.com>
>
> Enable the Adreno GPU and configure the Visionox RM692E5 panel.
>
> Signed-off-by: Eugene Lepshy <fekz115@...il.com>
> Co-developed-by: Danila Tikhonov <danila@...xyga.com>
> Signed-off-by: Danila Tikhonov <danila@...xyga.com>
> ---
> Note:
> Depends on https://lore.kernel.org/linux-arm-msm/20250122-dpu-111-topology-v2-1-505e95964af9@somainline.org/
> ---
> .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 53 ++++++++++++++++++-
> 1 file changed, 51 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
> index a5cda478bd78..cda317b49d5c 100644
> --- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
> +++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
> @@ -52,6 +52,8 @@ framebuffer0: framebuffer@...00000 {
> stride = <(1080 * 4)>;
> format = "a8r8g8b8";
>
> + display = <&panel0>;
This is allowed by bindings but doesn't seem to do anything
> +
> clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> <&dispcc DISP_CC_MDSS_MDP_CLK>,
> <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> @@ -757,6 +759,10 @@ &gpi_dma1 {
> status = "okay";
> };
>
> +&gpu {
> + status = "okay";
> +};
> +
> &gpu_zap_shader {
> firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn";
> };
> @@ -823,15 +829,44 @@ &ipa {
> status = "okay";
> };
>
> -/* MDSS remains disabled until the panel driver is present. */
> +&mdss {
> + status = "okay";
> +};
> +
> &mdss_dsi {
> vdda-supply = <&vdd_a_dsi_0_1p2>;
> + status = "okay";
>
> - /* Visionox RM692E5 panel */
> + panel0: panel@0 {
Is there going to be a panel1, too? ;)
Please drop the 0
Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Konrad
Powered by blists - more mailing lists