linux-kernel - Re: [PATCH v2] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3f77d118-ae98-41a3-8a15-c8b5cada0e96@oss.qualcomm.com>
Date: Tue, 11 Feb 2025 16:13:08 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Stephan Gerhold <stephan.gerhold@...aro.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Abel Vesa <abel.vesa@...aro.org>, Johan Hovold <johan@...nel.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: Re: [PATCH v2] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq

On 11.02.2025 4:01 PM, Stephan Gerhold wrote:
> Add the WiFi/BT nodes for QCP and describe the regulators for the WCN7850
> combo chip using the new power sequencing bindings. All voltages are
> derived from chained fixed regulators controlled using a single GPIO.
> 
> The same setup also works for CRD (and likely most of the other X1E80100
> laptops). However, unlike the QCP they use soldered or removable M.2 cards
> supplied by a single 3.3V fixed regulator. The other necessary voltages are
> then derived inside the M.2 card. Describing this properly requires
> new bindings, so this commit only adds QCP for now.
> 
> Signed-off-by: Stephan Gerhold <stephan.gerhold@...aro.org>
> ---
> Changes in v2:
> - Rebase on qcom for-next, patch 1-2 were applied already
> - Mention dummy regulator warning
> - Link to v1: https://lore.kernel.org/r/20241007-x1e80100-pwrseq-qcp-v1-0-f7166510ab17@linaro.org
> ---
> The Linux driver currently warns about a missing regulator supply:
> 
>   pwrseq-qcom_wcn wcn7850-pmu: supply vddio1p2 not found, using dummy regulator
> 
> This supply exists on the WCN7850 chip, but nothing is connected there on
> the QCP. Discussion is still open how to hide this warning in the driver,
> but since the DT is correct and the same setup is already used on SM8550
> upstream, this shouldn't block this patch.
> ---

Even with this warning:

Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>

Konrad