linux-kernel - Re: [PATCH 3/3] iio: chemical: add support for Sensirion SEN5x/SEN6x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <c397401d-63b7-7a6e-80fa-16dd4ceb0537@axis.com>
Date: Tue, 11 Feb 2025 10:29:54 +0800
From: Hermes Zhang <chenhuiz@...s.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Hermes Zhang <Hermes.Zhang@...s.com>, robh@...nel.org, lars@...afoo.de,
 krzk+dt@...nel.org, kernel@...s.com, linux-kernel@...r.kernel.org,
 linux-iio@...r.kernel.org
Subject: Re: [PATCH 3/3] iio: chemical: add support for Sensirion SEN5x/SEN6x


On 2025/2/11 3:09, Jonathan Cameron wrote:
> On Mon, 10 Feb 2025 17:16:57 +0800
> Hermes Zhang <chenhuiz@...s.com> wrote:
>
>> Hi Jonathan,
>>
>> Thanks a lot for your review. I will fix most of them in v2, just one
>> question below.
>>
>> Best Regards,
>> Hermes
>>
>>
>> On 2025/2/9 0:15, Jonathan Cameron wrote:
>>> On Thu, 6 Feb 2025 14:15:17 +0800
>>> Hermes Zhang <Hermes.Zhang@...s.com> wrote:
>>>
>>>   
>>>> +
>>>> +	state->last_update = jiffies;
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +
>>>> +static ssize_t status_show(struct device *dev, struct device_attribute *attr,
>>>> +			   char *buf)
>>>> +{
>>>> +	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>>>> +	struct sen_common_state *state = iio_priv(indio_dev);
>>>> +	int status;
>>>> +	int ret;
>>>> +
>>>> +	ret = sen_common_status(state->client, &status);
>>> This is custom ABI. So it would need documentation and will need
>>> to overcome quite a high barrier.
>>>
>>> Superficially this looks like debug perhaps that should be
>>> in debugfs?
>> The status is one of the support commands from the chip, we (from
>> userspace) could read it and notify customer if the sensor is wrong or
>> not. So it is ued in normal usage, regarding the ABI, I see your point,
>> so instead of my way, do you have any suggestion for how to handle it in
>> iio? Thanks.
> What is actually reporting?  I hope something more specific than
> 'wrong'.  Also when do you read it?  Standard software is never going to
> so you may be better of doing some scheduled reading or reading it
> on the back of a channel read.  Unfortunately the nature of failure modes
> is that they are not easy to describe in a generic ABI - sometimes
> our best bet is to just log an error (rate limited).
>
> Some of these look like they mean the data read is garbage when they
> are happening?
>
> Jonathan
>
It's e.g. a 32bit data which some of the bits indicate if the 
PM/CO2/GAS/RHT/FAN is error. Yes, the software will scheduled to read it 
and deal the error based on some policy configurable (e.g reboot the 
device). I hope if the driver can provide such inteface to read it, so 
userspace can decide how to handle it. Is there some similar case 
already in driver now? Thanks.


Best Regards,

Hermes