[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <173926612570.1219038.2885465365177392240.b4-ty@sntech.de>
Date: Tue, 11 Feb 2025 10:28:50 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Alexey Charkov <alchark@...il.com>
Cc: Heiko Stuebner <heiko@...ech.de>,
linux-sound@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: (subset) [PATCH 0/3] arm64: dts: rockchip: Add SPDIF on RK3588
On Mon, 20 Jan 2025 13:01:26 +0400, Alexey Charkov wrote:
> RK3588(s) uses a several SPDIF transmitters which are software
> compatible with those found in RK3568. This series adds the required
> device tree nodes in SoC .dtsi and enables the dedicated optical
> SPDIF output on the H96 Max V58.
>
> Note that only SPDIF 0/1 are meant as externally connected outputs,
> while SPDIF 2/3/4/5 are internally routed to the various display
> encoders inside the SoC. Thus, using SPDIF 0/1 only requires their
> device tree nodes to be enabled (provided that the signal is routed
> somewhere usable on the board itself), while the rest rely on driver
> support on the display connector side and are therefore not touched
> here.
>
> [...]
Applied, thanks!
[2/3] arm64: dts: rockchip: Add SPDIF nodes to RK3588(s) device trees
commit: 271ba4d6c56c7cb295def511cbcdd9880ec41e1b
[3/3] arm64: dts: rockchip: Enable SPDIF output on H96 Max V58
commit: cd81ee8667cc13ff69e11b44a727be07035aa536
Best regards,
--
Heiko Stuebner <heiko@...ech.de>
Powered by blists - more mailing lists