| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250214114708.28947-9-dpenkler@gmail.com>
Date: Fri, 14 Feb 2025 12:46:59 +0100
From: Dave Penkler <dpenkler@...il.com>
To: gregkh@...uxfoundation.org,
linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org
Cc: Dave Penkler <dpenkler@...il.com>
Subject: [PATCH 08/17] staging: gpib: gpio bitbang console messaging cleanup
Enable module name to be printed in pr_xxx and dev_xxx
Change pr_info in the dbg_printk macro to dev_dbg.
In order for dbg_printk macro to have the board variable
defined the signatures and calls to bb_buffer_print and
set_atn were changed to include board as a parameter.
Remove the #ifdef CONFIG_GPIB_DEBUG code.
Remove commented dbk_printk's.
Change dbg_printk(0, to dev_err where an error message is needed.
Remove dbg_printk for "not implemented" functions.
Remove "gpib_bitbang:" prefix in pr_err as it will be printed
with the module name.
Signed-off-by: Dave Penkler <dpenkler@...il.com>
---
drivers/staging/gpib/gpio/gpib_bitbang.c | 56 ++++++++++--------------
1 file changed, 23 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/gpib/gpio/gpib_bitbang.c b/drivers/staging/gpib/gpio/gpib_bitbang.c
index 828c99ea613f..2012db188f58 100644
--- a/drivers/staging/gpib/gpio/gpib_bitbang.c
+++ b/drivers/staging/gpib/gpio/gpib_bitbang.c
@@ -25,6 +25,8 @@
* device support (non master operation)
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define dev_fmt pr_fmt
#define NAME KBUILD_MODNAME
#define ENABLE_IRQ(IRQ, TYPE) irq_set_irq_type(IRQ, TYPE)
@@ -41,7 +43,7 @@
*/
#define dbg_printk(level, frm, ...) \
do { if (debug >= (level)) \
- pr_info("%s:%s - " frm, NAME, __func__, ## __VA_ARGS__); } \
+ dev_dbg(board->gpib_dev, frm, ## __VA_ARGS__); } \
while (0)
#define LINVAL gpiod_get_value(DAV), \
@@ -316,13 +318,14 @@ struct bb_priv {
};
static inline long usec_diff(struct timespec64 *a, struct timespec64 *b);
-static void bb_buffer_print(unsigned char *buffer, size_t length, int cmd, int eoi);
+static void bb_buffer_print(gpib_board_t *board, unsigned char *buffer, size_t length,
+ int cmd, int eoi);
static void set_data_lines(u8 byte);
static u8 get_data_lines(void);
static void set_data_lines_input(void);
static void set_data_lines_output(void);
static inline int check_for_eos(struct bb_priv *priv, uint8_t byte);
-static void set_atn(struct bb_priv *priv, int atn_asserted);
+static void set_atn(gpib_board_t *board, int atn_asserted);
static inline void SET_DIR_WRITE(struct bb_priv *priv);
static inline void SET_DIR_READ(struct bb_priv *priv);
@@ -334,11 +337,7 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("GPIB helper functions for bitbanging I/O");
/**** global variables ****/
-#ifdef CONFIG_GPIB_DEBUG
-static int debug = 1;
-#else
static int debug;
-#endif
module_param(debug, int, 0644);
static char printable(char x)
@@ -508,7 +507,7 @@ static int bb_write(gpib_board_t *board, uint8_t *buffer, size_t length,
board, mutex_is_locked(&board->user_mutex), length);
if (debug > 1)
- bb_buffer_print(buffer, length, priv->cmd, send_eoi);
+ bb_buffer_print(board, buffer, length, priv->cmd, send_eoi);
priv->count = 0;
priv->phase = 300;
@@ -550,7 +549,6 @@ static int bb_write(gpib_board_t *board, uint8_t *buffer, size_t length,
dbg_printk(1, "timeout after %zu/%zu at %d " LINFMT " eoi: %d\n",
priv->w_cnt, length, priv->phase, LINVAL, send_eoi);
} else {
- // dbg_printk(1,"written %zu\n", priv->w_cnt);
retval = priv->w_cnt;
}
} else {
@@ -811,7 +809,8 @@ static char *cmd_string[32] = {
"CFE" // 0x1f
};
-static void bb_buffer_print(unsigned char *buffer, size_t length, int cmd, int eoi)
+static void bb_buffer_print(gpib_board_t *board, unsigned char *buffer, size_t length,
+ int cmd, int eoi)
{
int i;
@@ -843,11 +842,13 @@ static void bb_buffer_print(unsigned char *buffer, size_t length, int cmd, int e
* STATUS Management *
* *
***************************************************************************/
-static void set_atn(struct bb_priv *priv, int atn_asserted)
+static void set_atn(gpib_board_t *board, int atn_asserted)
{
+ struct bb_priv *priv = board->private_data;
+
if (priv->listener_state != listener_idle &&
priv->talker_state != talker_idle) {
- dbg_printk(0, "listener/talker state machine conflict\n");
+ dev_err(board->gpib_dev, "listener/talker state machine conflict\n");
}
if (atn_asserted) {
if (priv->listener_state == listener_active)
@@ -869,7 +870,7 @@ static void set_atn(struct bb_priv *priv, int atn_asserted)
static int bb_take_control(gpib_board_t *board, int synchronous)
{
dbg_printk(2, "%d\n", synchronous);
- set_atn(board->private_data, 1);
+ set_atn(board, 1);
set_bit(CIC_NUM, &board->status);
return 0;
}
@@ -877,7 +878,7 @@ static int bb_take_control(gpib_board_t *board, int synchronous)
static int bb_go_to_standby(gpib_board_t *board)
{
dbg_printk(2, "\n");
- set_atn(board->private_data, 0);
+ set_atn(board, 0);
return 0;
}
@@ -988,13 +989,11 @@ static int bb_secondary_address(gpib_board_t *board, unsigned int address, int e
static int bb_parallel_poll(gpib_board_t *board, uint8_t *result)
{
- dbg_printk(1, "%s\n", "not implemented");
- return -EPERM;
+ return -ENOENT;
}
static void bb_parallel_poll_configure(gpib_board_t *board, uint8_t config)
{
- dbg_printk(1, "%s\n", "not implemented");
}
static void bb_parallel_poll_response(gpib_board_t *board, int ist)
@@ -1003,13 +1002,11 @@ static void bb_parallel_poll_response(gpib_board_t *board, int ist)
static void bb_serial_poll_response(gpib_board_t *board, uint8_t status)
{
- dbg_printk(1, "%s\n", "not implemented");
}
static uint8_t bb_serial_poll_status(gpib_board_t *board)
{
- dbg_printk(1, "%s\n", "not implemented");
- return 0; // -ENOSYS;
+ return 0; // -ENOENT;
}
static unsigned int bb_t1_delay(gpib_board_t *board, unsigned int nano_sec)
@@ -1030,15 +1027,12 @@ static unsigned int bb_t1_delay(gpib_board_t *board, unsigned int nano_sec)
static void bb_return_to_local(gpib_board_t *board)
{
- dbg_printk(1, "%s\n", "not implemented");
}
static int bb_line_status(const gpib_board_t *board)
{
int line_status = ValidALL;
-// dbg_printk(1,"\n");
-
if (gpiod_get_value(REN) == 0)
line_status |= BusREN;
if (gpiod_get_value(IFC) == 0)
@@ -1091,11 +1085,11 @@ static int bb_get_irq(gpib_board_t *board, char *name,
*irq = gpiod_to_irq(gpio);
dbg_printk(2, "IRQ %s: %d\n", name, *irq);
if (*irq < 0) {
- dbg_printk(0, "gpib: can't get IRQ for %s\n", name);
+ dev_err(board->gpib_dev, "can't get IRQ for %s\n", name);
return -1;
}
if (request_threaded_irq(*irq, handler, thread_fn, flags, name, board)) {
- dbg_printk(0, "gpib: can't request IRQ for %s %d\n", name, *irq);
+ dev_err(board->gpib_dev, "can't request IRQ for %s %d\n", name, *irq);
*irq = 0;
return -1;
}
@@ -1163,8 +1157,8 @@ static int allocate_gpios(gpib_board_t *board)
gpiod_add_lookup_table(lookup_table);
goto try_again;
}
- dbg_printk(0, "Unable to obtain gpio descriptor for pin %d error %ld\n",
- gpios_vector[j], PTR_ERR(desc));
+ dev_err(board->gpib_dev, "Unable to obtain gpio descriptor for pin %d error %ld\n",
+ gpios_vector[j], PTR_ERR(desc));
error = true;
break;
}
@@ -1253,7 +1247,7 @@ static int bb_attach(gpib_board_t *board, const gpib_board_config_t *config)
gpios_vector[&(DC) - &all_descriptors[0]] = -1;
gpios_vector[&(ACT_LED) - &all_descriptors[0]] = -1;
} else {
- dbg_printk(0, "Unrecognized pin mapping.\n");
+ dev_err(board->gpib_dev, "Unrecognized pin map %s\n", pin_map);
goto bb_attach_fail;
}
dbg_printk(0, "Using pin map \"%s\" %s\n", pin_map, (sn7516x) ?
@@ -1344,19 +1338,15 @@ static int __init bb_init_module(void)
int result = gpib_register_driver(&bb_interface, THIS_MODULE);
if (result) {
- pr_err("gpib_bitbang: gpib_register_driver failed: error = %d\n", result);
+ pr_err("gpib_register_driver failed: error = %d\n", result);
return result;
}
- dbg_printk(0, "module loaded with pin map \"%s\"%s\n",
- pin_map, (sn7516x_used) ? " and SN7516x driver support" : "");
return 0;
}
static void __exit bb_exit_module(void)
{
- dbg_printk(0, "module unloaded!");
-
gpib_unregister_driver(&bb_interface);
}
--
2.48.1
Powered by blists - more mailing lists