| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250214114708.28947-7-dpenkler@gmail.com>
Date: Fri, 14 Feb 2025 12:46:57 +0100
From: Dave Penkler <dpenkler@...il.com>
To: gregkh@...uxfoundation.org,
linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org
Cc: Dave Penkler <dpenkler@...il.com>
Subject: [PATCH 06/17] staging: gpib: fluke console messaging cleanup
Enable module name to be printed in pr_xxx and dev_xxx
Use DRV_NAME defined as KBUILD_MODNAME instead of hard coded
string "fluke_gpib" in platform_driver struct.
Remove commented printk's.
Change pr_err to dev_err wherever possible
Remove "fluke_gpib:" prefix in messages since this is
printed with the module name.
Correct dev_err message erroneously containing cb7210 identifier.
Signed-off-by: Dave Penkler <dpenkler@...il.com>
---
drivers/staging/gpib/eastwood/fluke_gpib.c | 90 +++++++---------------
1 file changed, 27 insertions(+), 63 deletions(-)
diff --git a/drivers/staging/gpib/eastwood/fluke_gpib.c b/drivers/staging/gpib/eastwood/fluke_gpib.c
index d5b1a03abf11..012ce9cb8999 100644
--- a/drivers/staging/gpib/eastwood/fluke_gpib.c
+++ b/drivers/staging/gpib/eastwood/fluke_gpib.c
@@ -7,6 +7,10 @@
* copyright: (C) 2006, 2010, 2015 Fluke Corporation
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define dev_fmt pr_fmt
+#define DRV_NAME KBUILD_MODNAME
+
#include "fluke_gpib.h"
#include "gpibP.h"
@@ -263,9 +267,9 @@ static int wait_for_read(gpib_board_t *board)
if (wait_event_interruptible(board->wait,
lacs_or_read_ready(board) ||
test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
- test_bit(TIMO_NUM, &board->status))) {
+ test_bit(TIMO_NUM, &board->status)))
retval = -ERESTARTSYS;
- }
+
if (test_bit(TIMO_NUM, &board->status))
retval = -ETIMEDOUT;
if (test_and_clear_bit(DEV_CLEAR_BN, &nec_priv->state))
@@ -316,20 +320,17 @@ static int wait_for_data_out_ready(gpib_board_t *board)
struct fluke_priv *e_priv = board->private_data;
struct nec7210_priv *nec_priv = &e_priv->nec7210_priv;
int retval = 0;
-// printk("%s: enter\n", __FUNCTION__);
if (wait_event_interruptible(board->wait,
(test_bit(TACS_NUM, &board->status) &&
source_handshake_is_sgns(e_priv)) ||
test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
- test_bit(TIMO_NUM, &board->status))) {
+ test_bit(TIMO_NUM, &board->status)))
retval = -ERESTARTSYS;
- }
if (test_bit(TIMO_NUM, &board->status))
retval = -ETIMEDOUT;
if (test_and_clear_bit(DEV_CLEAR_BN, &nec_priv->state))
retval = -EINTR;
-// printk("%s: exit, retval=%i\n", __FUNCTION__, retval);
return retval;
}
@@ -338,7 +339,6 @@ static int wait_for_sids_or_sgns(gpib_board_t *board)
struct fluke_priv *e_priv = board->private_data;
struct nec7210_priv *nec_priv = &e_priv->nec7210_priv;
int retval = 0;
-// printk("%s: enter\n", __FUNCTION__);
if (wait_event_interruptible(board->wait,
source_handshake_is_sids_or_sgns(e_priv) ||
@@ -350,7 +350,6 @@ static int wait_for_sids_or_sgns(gpib_board_t *board)
retval = -ETIMEDOUT;
if (test_and_clear_bit(DEV_CLEAR_BN, &nec_priv->state))
retval = -EINTR;
-// printk("%s: exit, retval=%i\n", __FUNCTION__, retval);
return retval;
}
@@ -362,7 +361,6 @@ static void fluke_dma_callback(void *arg)
unsigned long flags;
spin_lock_irqsave(&board->spinlock, flags);
-// printk("%s: enter\n", __FUNCTION__);
nec7210_set_reg_bits(nec_priv, IMR1, HR_DOIE | HR_DIIE, HR_DOIE | HR_DIIE);
wake_up_interruptible(&board->wait);
@@ -370,7 +368,7 @@ static void fluke_dma_callback(void *arg)
fluke_gpib_internal_interrupt(board);
clear_bit(DMA_WRITE_IN_PROGRESS_BN, &nec_priv->state);
clear_bit(DMA_READ_IN_PROGRESS_BN, &nec_priv->state);
-// printk("%s: exit\n", __FUNCTION__);
+
spin_unlock_irqrestore(&board->spinlock, flags);
}
@@ -385,7 +383,7 @@ static int fluke_dma_write(gpib_board_t *board, uint8_t *buffer, size_t length,
struct dma_async_tx_descriptor *tx_desc;
*bytes_written = 0;
-// printk("%s: enter\n", __FUNCTION__);
+
if (WARN_ON_ONCE(length > e_priv->dma_buffer_size))
return -EFAULT;
dmaengine_terminate_all(e_priv->dma_channel);
@@ -403,7 +401,7 @@ static int fluke_dma_write(gpib_board_t *board, uint8_t *buffer, size_t length,
tx_desc = dmaengine_prep_slave_single(e_priv->dma_channel, address, length, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!tx_desc) {
- pr_err("fluke_gpib: failed to allocate dma transmit descriptor\n");
+ dev_err(board->gpib_dev, "failed to allocate dma transmit descriptor\n");
retval = -ENOMEM;
goto cleanup;
}
@@ -419,10 +417,8 @@ static int fluke_dma_write(gpib_board_t *board, uint8_t *buffer, size_t length,
clear_bit(WRITE_READY_BN, &nec_priv->state);
set_bit(DMA_WRITE_IN_PROGRESS_BN, &nec_priv->state);
- // printk("%s: in spin lock\n", __FUNCTION__);
spin_unlock_irqrestore(&board->spinlock, flags);
-// printk("%s: waiting for write.\n", __FUNCTION__);
// suspend until message is sent
if (wait_event_interruptible(board->wait,
((readl(e_priv->write_transfer_counter) &
@@ -430,7 +426,6 @@ static int fluke_dma_write(gpib_board_t *board, uint8_t *buffer, size_t length,
test_bit(BUS_ERROR_BN, &nec_priv->state) ||
test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
test_bit(TIMO_NUM, &board->status))) {
- dev_dbg(board->gpib_dev, "gpib write interrupted!\n");
retval = -ERESTARTSYS;
}
if (test_bit(TIMO_NUM, &board->status))
@@ -459,7 +454,6 @@ static int fluke_dma_write(gpib_board_t *board, uint8_t *buffer, size_t length,
cleanup:
dma_unmap_single(board->dev, address, length, DMA_TO_DEVICE);
-// printk("%s: exit, retval=%d\n", __FUNCTION__, retval);
return retval;
}
@@ -474,7 +468,7 @@ static int fluke_accel_write(gpib_board_t *board, uint8_t *buffer, size_t length
size_t dma_remainder = remainder;
if (!e_priv->dma_channel) {
- pr_err("fluke_gpib: No dma channel available, cannot do accel write.");
+ dev_err(board->gpib_dev, "No dma channel available, cannot do accel write.");
return -ENXIO;
}
@@ -486,7 +480,6 @@ static int fluke_accel_write(gpib_board_t *board, uint8_t *buffer, size_t length
if (send_eoi)
--dma_remainder;
-// printk("%s: entering while loop\n", __FUNCTION__);
while (dma_remainder > 0) {
size_t num_bytes;
@@ -512,7 +505,7 @@ static int fluke_accel_write(gpib_board_t *board, uint8_t *buffer, size_t length
//handle sending of last byte with eoi
if (send_eoi) {
size_t num_bytes;
- // printk("%s: handling last byte\n", __FUNCTION__);
+
if (WARN_ON_ONCE(remainder != 1))
return -EFAULT;
@@ -533,7 +526,6 @@ static int fluke_accel_write(gpib_board_t *board, uint8_t *buffer, size_t length
return retval;
remainder -= num_bytes;
}
-// printk("%s: bytes send=%i\n", __FUNCTION__, (int)(length - remainder));
return 0;
}
@@ -544,7 +536,7 @@ static int fluke_get_dma_residue(struct dma_chan *chan, dma_cookie_t cookie)
result = dmaengine_pause(chan);
if (result < 0) {
- pr_err("fluke_gpib: dma pause failed?\n");
+ pr_err("dma pause failed?\n");
return result;
}
dmaengine_tx_status(chan, cookie, &state);
@@ -567,10 +559,6 @@ static int fluke_dma_read(gpib_board_t *board, uint8_t *buffer,
int i;
static const int timeout = 10;
- // printk("%s: enter, bus_address=0x%x, length=%i\n", __FUNCTION__,
- // (unsigned)bus_address,
- // (int)length);
-
*bytes_read = 0;
*end = 0;
if (length == 0)
@@ -589,7 +577,7 @@ static int fluke_dma_read(gpib_board_t *board, uint8_t *buffer,
bus_address, length, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!tx_desc) {
- pr_err("fluke_gpib: failed to allocate dma transmit descriptor\n");
+ dev_err(board->gpib_dev, "failed to allocate dma transmit descriptor\n");
dma_unmap_single(NULL, bus_address, length, DMA_FROM_DEVICE);
return -EIO;
}
@@ -608,14 +596,12 @@ static int fluke_dma_read(gpib_board_t *board, uint8_t *buffer,
clear_bit(READ_READY_BN, &nec_priv->state);
spin_unlock_irqrestore(&board->spinlock, flags);
-// printk("waiting for data transfer.\n");
// wait for data to transfer
if (wait_event_interruptible(board->wait,
test_bit(DMA_READ_IN_PROGRESS_BN, &nec_priv->state) == 0 ||
test_bit(RECEIVED_END_BN, &nec_priv->state) ||
test_bit(DEV_CLEAR_BN, &nec_priv->state) ||
test_bit(TIMO_NUM, &board->status))) {
- pr_warn("fluke: dma read wait interrupted\n");
retval = -ERESTARTSYS;
}
if (test_bit(TIMO_NUM, &board->status))
@@ -682,10 +668,6 @@ static int fluke_accel_read(gpib_board_t *board, uint8_t *buffer, size_t length,
int retval = 0;
size_t dma_nbytes;
-/* printk("%s: enter, buffer=0x%p, length=%i\n", __FUNCTION__,
- * buffer, (int)length);
- * printk("\t dma_buffer=0x%p\n", e_priv->dma_buffer);
- */
*end = 0;
*bytes_read = 0;
@@ -699,7 +681,6 @@ static int fluke_accel_read(gpib_board_t *board, uint8_t *buffer, size_t length,
nec7210_release_rfd_holdoff(board, nec_priv);
-// printk("%s: entering while loop\n", __FUNCTION__);
while (remain > 0) {
transfer_size = (e_priv->dma_buffer_size < remain) ?
e_priv->dma_buffer_size : remain;
@@ -709,14 +690,12 @@ static int fluke_accel_read(gpib_board_t *board, uint8_t *buffer, size_t length,
*bytes_read += dma_nbytes;
if (*end)
break;
- if (retval < 0) {
-// printk("%s: early exit, retval=%i\n", __FUNCTION__, (int)retval);
+ if (retval < 0)
return retval;
- }
if (need_resched())
schedule();
}
-// printk("%s: exit, retval=%i\n", __FUNCTION__, (int)retval);
+
return retval;
}
@@ -830,13 +809,6 @@ irqreturn_t fluke_gpib_internal_interrupt(gpib_board_t *board)
if (nec7210_interrupt_have_status(board, nec_priv, status1, status2) == IRQ_HANDLED)
retval = IRQ_HANDLED;
-/*
- * if((status1 & nec_priv->reg_bits[IMR1]) ||
- * (status2 & (nec_priv->reg_bits[IMR2] & IMR2_ENABLE_INTR_MASK)))
- * {
- * printk("fluke: status1 0x%x, status2 0x%x\n", status1, status2);
- * }
- */
if (read_byte(nec_priv, ADR0) & DATA_IN_STATUS) {
if (test_bit(RFD_HOLDOFF_BN, &nec_priv->state))
@@ -954,7 +926,7 @@ static int fluke_init(struct fluke_priv *e_priv, gpib_board_t *board, int handsh
/* poll so we can detect ATN changes */
if (gpib_request_pseudo_irq(board, fluke_gpib_interrupt)) {
- pr_err("fluke_gpib: failed to allocate pseudo_irq\n");
+ dev_err(board->gpib_dev, "failed to allocate pseudo_irq\n");
return -EINVAL;
}
@@ -984,7 +956,7 @@ static int fluke_attach_impl(gpib_board_t *board, const gpib_board_config_t *con
dma_cap_mask_t dma_cap;
if (!fluke_gpib_pdev) {
- pr_err("No gpib platform device was found, attach failed.\n");
+ dev_err(board->gpib_dev, "No fluke device was found, attach failed.\n");
return -ENODEV;
}
@@ -999,7 +971,7 @@ static int fluke_attach_impl(gpib_board_t *board, const gpib_board_config_t *con
res = platform_get_resource(fluke_gpib_pdev, IORESOURCE_MEM, 0);
if (!res) {
- dev_err(&fluke_gpib_pdev->dev, "Unable to locate mmio resource for cb7210 gpib\n");
+ dev_err(&fluke_gpib_pdev->dev, "Unable to locate mmio resource\n");
return -ENODEV;
}
@@ -1012,10 +984,7 @@ static int fluke_attach_impl(gpib_board_t *board, const gpib_board_config_t *con
e_priv->gpib_iomem_res = res;
nec_priv->mmiobase = ioremap(e_priv->gpib_iomem_res->start,
- resource_size(e_priv->gpib_iomem_res));
- pr_info("gpib: mmiobase %llx remapped to %p, length=%d\n",
- (u64)e_priv->gpib_iomem_res->start,
- nec_priv->mmiobase, (int)resource_size(e_priv->gpib_iomem_res));
+ resource_size(e_priv->gpib_iomem_res));
if (!nec_priv->mmiobase) {
dev_err(&fluke_gpib_pdev->dev, "Could not map I/O memory\n");
return -ENOMEM;
@@ -1050,19 +1019,14 @@ static int fluke_attach_impl(gpib_board_t *board, const gpib_board_config_t *con
e_priv->write_transfer_counter = ioremap(e_priv->write_transfer_counter_res->start,
resource_size(e_priv->write_transfer_counter_res));
- pr_info("gpib: write transfer counter %lx remapped to %p, length=%d\n",
- (unsigned long)e_priv->write_transfer_counter_res->start,
- e_priv->write_transfer_counter,
- (int)resource_size(e_priv->write_transfer_counter_res));
if (!e_priv->write_transfer_counter) {
dev_err(&fluke_gpib_pdev->dev, "Could not map I/O memory\n");
return -ENOMEM;
}
irq = platform_get_irq(fluke_gpib_pdev, 0);
- pr_info("gpib: irq %d\n", irq);
if (irq < 0) {
- dev_err(&fluke_gpib_pdev->dev, "fluke_gpib: request for IRQ failed\n");
+ dev_err(&fluke_gpib_pdev->dev, "failed to obtain IRQ\n");
return -EBUSY;
}
retval = request_irq(irq, fluke_gpib_interrupt, isr_flags, fluke_gpib_pdev->name, board);
@@ -1078,7 +1042,7 @@ static int fluke_attach_impl(gpib_board_t *board, const gpib_board_config_t *con
dma_cap_set(DMA_SLAVE, dma_cap);
e_priv->dma_channel = dma_request_channel(dma_cap, gpib_dma_channel_filter, NULL);
if (!e_priv->dma_channel) {
- pr_err("fluke_gpib: failed to allocate a dma channel.\n");
+ dev_err(board->gpib_dev, "failed to allocate a dma channel.\n");
// we don't error out here because unaccel interface will still
// work without dma
}
@@ -1142,7 +1106,7 @@ MODULE_DEVICE_TABLE(of, fluke_gpib_of_match);
static struct platform_driver fluke_gpib_platform_driver = {
.driver = {
- .name = "fluke_gpib",
+ .name = DRV_NAME,
.of_match_table = fluke_gpib_of_match,
},
.probe = &fluke_gpib_probe
@@ -1154,25 +1118,25 @@ static int __init fluke_init_module(void)
result = platform_driver_register(&fluke_gpib_platform_driver);
if (result) {
- pr_err("fluke_gpib: platform_driver_register failed: error = %d\n", result);
+ pr_err("platform_driver_register failed: error = %d\n", result);
return result;
}
result = gpib_register_driver(&fluke_unaccel_interface, THIS_MODULE);
if (result) {
- pr_err("fluke_gpib: gpib_register_driver failed: error = %d\n", result);
+ pr_err("gpib_register_driver failed: error = %d\n", result);
goto err_unaccel;
}
result = gpib_register_driver(&fluke_hybrid_interface, THIS_MODULE);
if (result) {
- pr_err("fluke_gpib: gpib_register_driver failed: error = %d\n", result);
+ pr_err("gpib_register_driver failed: error = %d\n", result);
goto err_hybrid;
}
result = gpib_register_driver(&fluke_interface, THIS_MODULE);
if (result) {
- pr_err("fluke_gpib: gpib_register_driver failed: error = %d\n", result);
+ pr_err("gpib_register_driver failed: error = %d\n", result);
goto err_interface;
}
--
2.48.1
Powered by blists - more mailing lists