| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250214114708.28947-16-dpenkler@gmail.com>
Date: Fri, 14 Feb 2025 12:47:06 +0100
From: Dave Penkler <dpenkler@...il.com>
To: gregkh@...uxfoundation.org,
linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org
Cc: Dave Penkler <dpenkler@...il.com>
Subject: [PATCH 15/17] staging: gpib: pc2 console messaging cleanup
Enable module name to be printed in pr_xxx and dev_xxx
Turn long pr_err into comment, short message in dev_err.
Change pr_err to dev_err where possible.
Use error return codes consistent with messages.
Signed-off-by: Dave Penkler <dpenkler@...il.com>
---
drivers/staging/gpib/pc2/pc2_gpib.c | 51 ++++++++++++++++-------------
1 file changed, 28 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/gpib/pc2/pc2_gpib.c b/drivers/staging/gpib/pc2/pc2_gpib.c
index 3eccd4c54afa..6711851301ec 100644
--- a/drivers/staging/gpib/pc2/pc2_gpib.c
+++ b/drivers/staging/gpib/pc2/pc2_gpib.c
@@ -4,6 +4,9 @@
* copyright : (C) 2001, 2002 by Frank Mori Hess
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define dev_fmt pr_fmt
+
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/module.h>
@@ -268,7 +271,8 @@ static int pc2_generic_attach(gpib_board_t *board, const gpib_board_config_t *co
* is adapted to use isa_register_driver.
*/
if (config->ibdma)
- pr_err("DMA disabled for pc2 gpib, driver needs to be adapted to use isa_register_driver to get a struct device*");
+ // driver needs to be adapted to use isa_register_driver to get a struct device*
+ dev_err(board->gpib_dev, "DMA disabled for pc2 gpib");
#else
if (config->ibdma) {
nec_priv->dma_buffer_length = 0x1000;
@@ -280,7 +284,7 @@ static int pc2_generic_attach(gpib_board_t *board, const gpib_board_config_t *co
// request isa dma channel
if (request_dma(config->ibdma, "pc2")) {
- pr_err("gpib: can't request DMA %d\n", config->ibdma);
+ dev_err(board->gpib_dev, "can't request DMA %d\n", config->ibdma);
return -1;
}
nec_priv->dma_channel = config->ibdma;
@@ -306,8 +310,8 @@ static int pc2_attach(gpib_board_t *board, const gpib_board_config_t *config)
nec_priv->offset = pc2_reg_offset;
if (!request_region(config->ibbase, pc2_iosize, "pc2")) {
- pr_err("gpib: ioports are already in use\n");
- return -1;
+ dev_err(board->gpib_dev, "ioports are already in use\n");
+ return -EBUSY;
}
nec_priv->iobase = config->ibbase;
@@ -316,14 +320,14 @@ static int pc2_attach(gpib_board_t *board, const gpib_board_config_t *config)
// install interrupt handler
if (config->ibirq) {
if (request_irq(config->ibirq, pc2_interrupt, isr_flags, "pc2", board)) {
- pr_err("gpib: can't request IRQ %d\n", config->ibirq);
- return -1;
+ dev_err(board->gpib_dev, "can't request IRQ %d\n", config->ibirq);
+ return -EBUSY;
}
}
pc2_priv->irq = config->ibirq;
/* poll so we can detect assertion of ATN */
if (gpib_request_pseudo_irq(board, pc2_interrupt)) {
- pr_err("pc2_gpib: failed to allocate pseudo_irq\n");
+ dev_err(board->gpib_dev, "failed to allocate pseudo_irq\n");
return -1;
}
/* set internal counter register for 8 MHz input clock */
@@ -384,18 +388,19 @@ static int pc2a_common_attach(gpib_board_t *board, const gpib_board_config_t *co
case 0x62e1:
break;
default:
- pr_err("PCIIa base range invalid, must be one of 0x[0246]2e1, but is 0x%x\n",
- config->ibbase);
+ dev_err(board->gpib_dev, "PCIIa base range invalid, must be one of 0x[0246]2e1, but is 0x%x\n",
+ config->ibbase);
return -1;
}
if (config->ibirq) {
if (config->ibirq < 2 || config->ibirq > 7) {
- pr_err("pc2_gpib: illegal interrupt level %i\n", config->ibirq);
+ dev_err(board->gpib_dev, "illegal interrupt level %i\n",
+ config->ibirq);
return -1;
}
} else {
- pr_err("pc2_gpib: interrupt disabled, using polling mode (slow)\n");
+ dev_err(board->gpib_dev, "interrupt disabled, using polling mode (slow)\n");
}
#ifdef CHECK_IOPORTS
unsigned int err = 0;
@@ -407,36 +412,36 @@ static int pc2a_common_attach(gpib_board_t *board, const gpib_board_config_t *co
if (config->ibirq && check_region(pc2a_clear_intr_iobase + config->ibirq, 1))
err++;
if (err) {
- pr_err("gpib: ioports are already in use");
- return -1;
+ dev_err(board->gpib_dev, "ioports are already in use");
+ return -EBUSY;
}
#endif
for (i = 0; i < num_registers; i++) {
if (!request_region(config->ibbase +
i * pc2a_reg_offset, 1, "pc2a")) {
- pr_err("gpib: ioports are already in use");
+ dev_err(board->gpib_dev, "ioports are already in use");
for (j = 0; j < i; j++)
release_region(config->ibbase +
j * pc2a_reg_offset, 1);
- return -1;
+ return -EBUSY;
}
}
nec_priv->iobase = config->ibbase;
if (config->ibirq) {
if (!request_region(pc2a_clear_intr_iobase + config->ibirq, 1, "pc2a")) {
- pr_err("gpib: ioports are already in use");
+ dev_err(board->gpib_dev, "ioports are already in use");
return -1;
}
pc2_priv->clear_intr_addr = pc2a_clear_intr_iobase + config->ibirq;
if (request_irq(config->ibirq, pc2a_interrupt, 0, "pc2a", board)) {
- pr_err("gpib: can't request IRQ %d\n", config->ibirq);
- return -1;
+ dev_err(board->gpib_dev, "can't request IRQ %d\n", config->ibirq);
+ return -EBUSY;
}
}
pc2_priv->irq = config->ibirq;
/* poll so we can detect assertion of ATN */
if (gpib_request_pseudo_irq(board, pc2_interrupt)) {
- pr_err("pc2_gpib: failed to allocate pseudo_irq\n");
+ dev_err(board->gpib_dev, "failed to allocate pseudo_irq\n");
return -1;
}
@@ -630,25 +635,25 @@ static int __init pc2_init_module(void)
ret = gpib_register_driver(&pc2_interface, THIS_MODULE);
if (ret) {
- pr_err("pc2_gpib: gpib_register_driver failed: error = %d\n", ret);
+ pr_err("gpib_register_driver failed: error = %d\n", ret);
return ret;
}
ret = gpib_register_driver(&pc2a_interface, THIS_MODULE);
if (ret) {
- pr_err("pc2_gpib: gpib_register_driver failed: error = %d\n", ret);
+ pr_err("gpib_register_driver failed: error = %d\n", ret);
goto err_pc2a;
}
ret = gpib_register_driver(&pc2a_cb7210_interface, THIS_MODULE);
if (ret) {
- pr_err("pc2_gpib: gpib_register_driver failed: error = %d\n", ret);
+ pr_err("gpib_register_driver failed: error = %d\n", ret);
goto err_cb7210;
}
ret = gpib_register_driver(&pc2_2a_interface, THIS_MODULE);
if (ret) {
- pr_err("pc2_gpib: gpib_register_driver failed: error = %d\n", ret);
+ pr_err("gpib_register_driver failed: error = %d\n", ret);
goto err_pc2_2a;
}
--
2.48.1
Powered by blists - more mailing lists