| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250216-rk3576-tsadc-upstream-v1-2-6ec969322a14@collabora.com>
Date: Sun, 16 Feb 2025 00:34:51 +0100
From: Nicolas Frattaroli <nicolas.frattaroli@...labora.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>, Zhang Rui <rui.zhang@...el.com>,
Lukasz Luba <lukasz.luba@....com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>
Cc: Sebastian Reichel <sebastian.reichel@...labora.com>,
kernel@...labora.com, linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Nicolas Frattaroli <nicolas.frattaroli@...labora.com>
Subject: [PATCH 2/6] arm64: dts: rockchip: Add thermal nodes to RK3576
Add the TSADC node to the RK3576. Additionally, add everything the TSADC
needs to function, i.e. thermal zones, their trip points and maps, as
well as adjust the CPU cooling-cells property.
The polling-delay properties are set to 0 as we do have interrupts for
this TSADC on this particular SoC.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@...labora.com>
---
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 164 ++++++++++++++++++++++++++++++-
1 file changed, 162 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 29b47799849ad50540755d62622865d84226c6c4..73df515a3937414d89515b4ddccf71f33f6a4fe7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/power/rockchip,rk3576-power.h>
#include <dt-bindings/reset/rockchip,rk3576-cru.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3576";
@@ -113,9 +114,9 @@ cpu_l0: cpu@0 {
capacity-dmips-mhz = <485>;
clocks = <&scmi_clk ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
- #cooling-cells = <2>;
dynamic-power-coefficient = <120>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_l1: cpu@1 {
@@ -127,6 +128,7 @@ cpu_l1: cpu@1 {
clocks = <&scmi_clk ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_l2: cpu@2 {
@@ -138,6 +140,7 @@ cpu_l2: cpu@2 {
clocks = <&scmi_clk ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_l3: cpu@3 {
@@ -149,6 +152,7 @@ cpu_l3: cpu@3 {
clocks = <&scmi_clk ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b0: cpu@100 {
@@ -159,9 +163,9 @@ cpu_b0: cpu@100 {
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
- #cooling-cells = <2>;
dynamic-power-coefficient = <320>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b1: cpu@101 {
@@ -173,6 +177,7 @@ cpu_b1: cpu@101 {
clocks = <&scmi_clk ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b2: cpu@102 {
@@ -184,6 +189,7 @@ cpu_b2: cpu@102 {
clocks = <&scmi_clk ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b3: cpu@103 {
@@ -195,6 +201,7 @@ cpu_b3: cpu@103 {
clocks = <&scmi_clk ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
idle-states {
@@ -431,6 +438,143 @@ psci {
method = "smc";
};
+ thermal_zones: thermal-zones {
+ /* sensor near the center of the SoC */
+ package_thermal: package-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ package_crit: package-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* sensor for cluster1 (big Cortex-A72 cores) */
+ bigcore_thermal: bigcore-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ bigcore_alert: bigcore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ bigcore_crit: bigcore-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&bigcore_alert>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor for cluster0 (little Cortex-A53 cores) */
+ littlecore_thermal: littlecore-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ littlecore_alert: littlecore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ littlecore_crit: littlecore-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&littlecore_alert>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 3>;
+
+ trips {
+ gpu_alert: gpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu_crit: gpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ npu_thermal: npu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 4>;
+
+ trips {
+ npu_crit: npu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr_thermal: ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 5>;
+
+ trips {
+ ddr_crit: ddr-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -1694,6 +1838,22 @@ saradc: adc@...00000 {
status = "disabled";
};
+ tsadc: tsadc@...70000 {
+ compatible = "rockchip,rk3576-tsadc";
+ reg = <0x0 0x2ae70000 0x0 0x400>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ assigned-clocks = <&cru CLK_TSADC>;
+ assigned-clock-rates = <2000000>;
+ resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb", "tsadc";
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <120000>;
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ };
+
i2c9: i2c@...80000 {
compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0x2ae80000 0x0 0x1000>;
--
2.48.1
Powered by blists - more mailing lists