[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <62495f94-c3e0-4483-a4cb-d01c261903c6@lunn.ch>
Date: Sun, 16 Feb 2025 17:19:25 +0100
From: Andrew Lunn <andrew@...n.ch>
To: dimitri.fedrau@...bherr.com
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Andrew Davis <afd@...com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Dimitri Fedrau <dima.fedrau@...il.com>
Subject: Re: [PATCH net-next v5 3/3] net: phy: dp83822: Add support for
changing the transmit amplitude voltage
On Fri, Feb 14, 2025 at 03:14:11PM +0100, Dimitri Fedrau via B4 Relay wrote:
> From: Dimitri Fedrau <dimitri.fedrau@...bherr.com>
>
> Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
> Modifying it can be necessary to compensate losses on the PCB and
> connector, so the voltages measured on the RJ45 pins are conforming.
>
> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@...bherr.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Andrew
Powered by blists - more mailing lists