Message-ID: <a48ec78d-a86f-4332-87d0-e6071f72a7d1@redhat.com>
Date: Mon, 17 Feb 2025 10:25:10 +0100
From: Eric Auger <eauger@...hat.com>
To: "Michael S. Tsirkin" <mst@...hat.com>
Cc: "Ning, Hongyu" <hongyu.ning@...ux.intel.com>,
 "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>,
 Jason Wang <jasowang@...hat.com>, Xuan Zhuo <xuanzhuo@...ux.alibaba.com>,
 Eugenio Pérez <eperezma@...hat.com>,
 Zhenzhong Duan <zhenzhong.duan@...el.com>, virtualization@...ts.linux.dev,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH] virtio: Remove virtio devices on device_shutdown()

Hi Michael, Hongyu,

On 2/14/25 1:16 PM, Michael S. Tsirkin wrote:
> On Fri, Feb 14, 2025 at 08:56:56AM +0100, Eric Auger wrote:
>> Hi,
>>
>> On 2/14/25 8:21 AM, Ning, Hongyu wrote:
>>>
>>>
>>> On 2025/2/6 16:59, Eric Auger wrote:
>>>> Hi,
>>>>
>>>> On 2/4/25 12:46 PM, Eric Auger wrote:
>>>>> Hi,
>>>>>
>>>>> On 2/3/25 3:48 PM, Michael S. Tsirkin wrote:
>>>>>> On Fri, Jan 31, 2025 at 10:53:15AM +0100, Eric Auger wrote:
>>>>>>> Hi Kirill, Michael
>>>>>>>
>>>>>>> On 8/8/24 9:51 AM, Kirill A. Shutemov wrote:
>>>>>>>> Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory
>>>>>>>> accesses during the hang.
>>>>>>>>
>>>>>>>>     Invalid read at addr 0x102877002, size 2, region '(null)',
>>>>>>>> reason: rejected
>>>>>>>>     Invalid write at addr 0x102877A44, size 2, region '(null)',
>>>>>>>> reason: rejected
>>>>>>>>     ...
>>>>>>>>
>>>>>>>> It was traced down to virtio-console. Kexec works fine if virtio-
>>>>>>>> console
>>>>>>>> is not in use.
>>>>>>>>
>>>>>>>> Looks like virtio-console continues to write to the MMIO even after
>>>>>>>> underlying virtio-pci device is removed.
>>>>>>>>
>>>>>>>> The problem can be mitigated by removing all virtio devices on virtio
>>>>>>>> bus shutdown.
>>>>>>>>
>>>>>>>> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
>>>>>>>> Reported-by: Hongyu Ning <hongyu.ning@...ux.intel.com>
>>>>>>>
>>>>>>> Gentle ping on that patch that seems to have fallen though the cracks.
>>>>>>>
>>>>>>> I think this fix is really needed. I have another test case with a
>>>>>>> rebooting guest exposed with virtio-net (backed by vhost-net) and
>>>>>>> viommu. Since there is currently no shutdown for the virtio-net, on
>>>>>>> reboot, the IOMMU is disabled through the native_machine_shutdown()/
>>>>>>> x86_platform.iommu_shutdown() while the virtio-net is still alive.
>>>>>>>
>>>>>>> Normally device_shutdown() should call virtio-net shutdown before the
>>>>>>> IOMMU tear down and we wouldn't see any spurious transactions after
>>>>>>> iommu shutdown.
>>>>>>>
>>>>>>> With that fix, the above test case is fixed and I do not see spurious
>>>>>>> vhost IOTLB miss spurious requests.
>>>>>>>
>>>>>>> For more details, see qemu thread ([PATCH] hw/virtio/vhost: Disable
>>>>>>> IOTLB callbacks when IOMMU gets disabled,
>>>>>>> https://lore.kernel.org/all/20250120173339.865681-1-
>>>>>>> eric.auger@...hat.com/)
>>>>>>>
>>>>>>>
>>>>>>> Reviewed-by: Eric Auger <eric.auger@...hat.com>
>>>>>>> Tested-by: Eric Auger <eric.auger@...hat.com>
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Eric
>>>>>>>
>>>>>>>> ---
>>>>>>>>   drivers/virtio/virtio.c | 10 ++++++++++
>>>>>>>>   1 file changed, 10 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
>>>>>>>> index a9b93e99c23a..6c2f908eb22c 100644
>>>>>>>> --- a/drivers/virtio/virtio.c
>>>>>>>> +++ b/drivers/virtio/virtio.c
>>>>>>>> @@ -356,6 +356,15 @@ static void virtio_dev_remove(struct device *_d)
>>>>>>>>       of_node_put(dev->dev.of_node);
>>>>>>>>   }
>>>>>>>>   +static void virtio_dev_shutdown(struct device *_d)
>>>>>>>> +{
>>>>>>>> +    struct virtio_device *dev = dev_to_virtio(_d);
>>>>>>>> +    struct virtio_driver *drv = drv_to_virtio(dev->dev.driver);
>>>>>>>> +
>>>>>>>> +    if (drv && drv->remove)
>>>>>>>> +        drv->remove(dev);
>>>>>>
>>>>>>
>>>>>> I am concerned that full remove is a heavyweight operation.
>>>>>> Do not want to slow down reboots even more.
>>>>>> How about just doing a reset, instead?
>>>>>
>>>>> I tested with
>>>>>
>>>>> static void virtio_dev_shutdown(struct device *_d)
>>>>> {
>>>>>          struct virtio_device *dev = dev_to_virtio(_d);
>>>>>
>>>>>          virtio_reset_device(dev);
>>>>> }
>>>>>
>>>>>
>>>>> and it fixes my issue.
>>>>>
>>>>> Kirill, would that fix you issue too?
>>>
>>> Hi,
>>>
>>> sorry for my late response, I synced with Kirill offline and did a retest.
>>>
>>> The issue is still reproduced on my side, kexec will be stuck in case of
>>> "console=hvc0" append in kernel cmdline and even with such patch applied.
>>
>> Thanks for testing!
>>
>> Michael, it looks like the initial patch from Kyrill is the one that
>> fixes both issues. virtio_reset_device() usage does not work for the
>> initial bug report while it works for me. Other ideas?
>>
>> Thanks
>>
>> Eric
> 
> Ah, wait a second.
> 
> Looks like virtio-console continues to write to the MMIO even after
> underlying virtio-pci device is removed.
> 
> Hmm. I am not sure why that is a problem, but I assume some hypervisors just
> hang the system if you try to kick them after reset.
> Unfortunate that spec did not disallow it.
> 
> If we want to prevent that, we want to do something like this:
> 
> 
> 	/*
> 	 * Some devices get wedged if you kick them after they are
> 	 * reset. Mark all vqs as broken to make sure we don't.
> 	 */
>         virtio_break_device(dev);
>         /*
>          * The below virtio_synchronize_cbs() guarantees that any
>          * interrupt for this line arriving after
>          * virtio_synchronize_vqs() has completed is guaranteed to see
>          * vq->broken as true.
>          */
>         virtio_synchronize_cbs(dev);
>         dev->config->reset(dev);
> 
> 
> I assume this still works for you, yes?
Would that still been done in the virtio_dev_shutdown()?

Is that what you tested Hongyu?

Eric
> 
> 
> 
>>>
>>> my kernel code base is 6.14.0-rc2.
>>>
>>> let me know if any more experiments needed.
>>>
>>> ---
>>>  drivers/virtio/virtio.c | 8 ++++++++
>>>  1 file changed, 8 insertions(+)
>>>
>>> diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
>>> index ba37665188b5..f9f885d04763 100644
>>> --- a/drivers/virtio/virtio.c
>>> +++ b/drivers/virtio/virtio.c
>>> @@ -395,6 +395,13 @@ static const struct cpumask
>>> *virtio_irq_get_affinity(struct device *_d,
>>>         return dev->config->get_vq_affinity(dev, irq_vec);
>>>  }
>>>
>>> +static void virtio_dev_shutdown(struct device *_d)
>>> +{
>>> +        struct virtio_device *dev = dev_to_virtio(_d);
>>> +
>>> +        virtio_reset_device(dev);
>>> +}
>>> +
>>>  static const struct bus_type virtio_bus = {
>>>         .name  = "virtio",
>>>         .match = virtio_dev_match,
>>> @@ -403,6 +410,7 @@ static const struct bus_type virtio_bus = {
>>>         .probe = virtio_dev_probe,
>>>         .remove = virtio_dev_remove,
>>>         .irq_get_affinity = virtio_irq_get_affinity,
>>> +       .shutdown = virtio_dev_shutdown,
>>>  };
>>>
>>>  int __register_virtio_driver(struct virtio_driver *driver, struct
>>> module *owner)
>>> -- 
>>> 2.43.0
>>>
>>>
>>>> gentle ping.
>>>>
>>>> this also fixes another issue with qemu vSMMU + virtio-scsi-pci. With
>>>> the above addition I get rid of spurious warning in qemu on guest reboot.
>>>>
>>>> qemu-system-aarch64: virtio: zero sized buffers are not allowed
>>>> qemu-system-aarch64: vhost vring error in virtqueue 0: Invalid
>>>> argument (22)
>>>>
>>>> Would you mind if I respin?
>>>>
>>>> Thanks
>>>>
>>>> Eric
>>>>
>>>>
>>>>
>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Eric
>>>>>>
>>>>>>>> +}
>>>>>>>> +
>>>>>>>>   static const struct bus_type virtio_bus = {
>>>>>>>>       .name  = "virtio",
>>>>>>>>       .match = virtio_dev_match,
>>>>>>>> @@ -363,6 +372,7 @@ static const struct bus_type virtio_bus = {
>>>>>>>>       .uevent = virtio_uevent,
>>>>>>>>       .probe = virtio_dev_probe,
>>>>>>>>       .remove = virtio_dev_remove,
>>>>>>>> +    .shutdown = virtio_dev_shutdown,
>>>>>>>>   };
>>>>>>>>     int __register_virtio_driver(struct virtio_driver *driver,
>>>>>>>> struct module *owner)
>>>>>>
>>>>>
>>>>
>>>
> 

Powered by blists - more mailing lists