[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250218150838.GA6537@nxa18884-linux>
Date: Tue, 18 Feb 2025 23:08:38 +0800
From: Peng Fan <peng.fan@....nxp.com>
To: Daniel Baluta <daniel.baluta@....com>
Cc: p.zabel@...gutronix.de, shawnguo@...nel.org, mathieu.poirier@...aro.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, andersson@...nel.org,
linux-remoteproc@...r.kernel.org, iuliana.prodan@....com,
laurentiu.mihalcea@....com, shengjiu.wang@....com, Frank.Li@....com,
krzk@...nel.org
Subject: Re: [PATCH 2/5] reset: imx8mp-audiomix: Prepare the code for more
reset bits
On Tue, Feb 18, 2025 at 10:57:09AM +0200, Daniel Baluta wrote:
>Current code supports EARC PHY Software Reset and EARC Software
>Reset but it is not easily extensible to more reset bits.
>
>So, refactor the code in order to easily allow more reset bits
>in the future.
>
>Signed-off-by: Daniel Baluta <daniel.baluta@....com>
>---
> drivers/reset/reset-imx8mp-audiomix.c | 53 ++++++++++++++++++++++-----
> 1 file changed, 43 insertions(+), 10 deletions(-)
>
>diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
>index 1fe21980a66c..6b1666c4e069 100644
>--- a/drivers/reset/reset-imx8mp-audiomix.c
>+++ b/drivers/reset/reset-imx8mp-audiomix.c
>@@ -12,7 +12,30 @@
> #include <linux/reset-controller.h>
>
> #define IMX8MP_AUDIOMIX_EARC_OFFSET 0x200
>-#define IMX8MP_AUDIOMIX_EARC_RESET_MASK 0x3
>+#define IMX8MP_AUDIOMIX_EARC_RESET_MASK 0x1
>+#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK 0x2
>+
>+#define IMX8MP_AUDIOMIX_EARC 0
>+#define IMX8MP_AUDIOMIX_EARC_PHY 1
Should this two lines be put in dt-bindings?
>+
>+#define IMX8MP_AUDIOMIX_RESET_NUM 2
>+
>+struct imx8mp_reset_map {
>+ unsigned int offset;
>+ unsigned int mask;
>+};
>+
>+static const struct imx8mp_reset_map reset_map[IMX8MP_AUDIOMIX_RESET_NUM] = {
>+ [IMX8MP_AUDIOMIX_EARC] = {
>+ .offset = IMX8MP_AUDIOMIX_EARC_OFFSET,
>+ .mask = IMX8MP_AUDIOMIX_EARC_RESET_MASK,
>+ },
>+ [IMX8MP_AUDIOMIX_EARC_PHY] = {
>+ .offset = IMX8MP_AUDIOMIX_EARC_OFFSET,
>+ .mask = IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK,
>+ },
>+
blank line
>+};
>
Regards,
Peng
Powered by blists - more mailing lists