| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <15399016.tv2OnDr8pf@jernej-laptop>
Date: Tue, 18 Feb 2025 21:29:37 +0100
From: Jernej Škrabec <jernej.skrabec@...il.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>, Samuel Holland <samuel@...lland.org>,
Andre Przywara <andre.przywara@....com>
Cc: Philipp Zabel <p.zabel@...gutronix.de>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 13/15] clk: sunxi-ng: a523: add reset lines
Dne petek, 14. februar 2025 ob 13:53:57 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> Allwinner SoCs do not contain a separate reset controller, instead the
> reset lines for the various devices are integrated into the "BGR" (Bus
> Gate / Reset) registers, for each device group: one for all UARTs, one
> for all SPI interfaces, and so on.
> The Allwinner CCU driver also doubles as a reset provider, and since the
> reset lines are indeed just single bits in those BGR register, we can
> represent them easily in an array of structs, just containing the
> register offset and the bit number.
>
> Add the location of the reset bits for all devices in the A523/T527
> SoCs, using the existing sunxi CCU infrastructure.
>
> Signed-off-by: Andre Przywara <andre.przywara@....com>
> ---
> drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 83 ++++++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> index fbed9b2b3b2f9..d57565f07a112 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> @@ -1475,11 +1475,94 @@ static struct clk_hw_onecell_data sun55i_a523_hw_clks = {
> },
> };
>
> +static struct ccu_reset_map sun55i_a523_ccu_resets[] = {
> + [RST_MBUS] = { 0x540, BIT(30) },
> + [RST_BUS_NSI] = { 0x54c, BIT(16) },
> + [RST_BUS_DE] = { 0x60c, BIT(16) },
> + [RST_BUS_DI] = { 0x62c, BIT(16) },
> + [RST_BUS_G2D] = { 0x63c, BIT(16) },
> + [RST_BUS_SYS] = { 0x64c, BIT(16) },
> + [RST_BUS_GPU] = { 0x67c, BIT(16) },
> + [RST_BUS_CE] = { 0x68c, BIT(16) },
> + [RST_BUS_SYS_CE] = { 0x68c, BIT(17) },
> + [RST_BUS_VE] = { 0x69c, BIT(16) },
> + [RST_BUS_DMA] = { 0x70c, BIT(16) },
> + [RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
> + [RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
> + [RST_BUS_CPUXTIMER] = { 0x74c, BIT(16) },
> + [RST_BUS_DBG] = { 0x78c, BIT(16) },
> + [RST_BUS_PWM0] = { 0x7ac, BIT(16) },
> + [RST_BUS_PWM1] = { 0x7ac, BIT(17) },
> + [RST_BUS_DRAM] = { 0x80c, BIT(16) },
> + [RST_BUS_NAND] = { 0x82c, BIT(16) },
> + [RST_BUS_MMC0] = { 0x84c, BIT(16) },
> + [RST_BUS_MMC1] = { 0x84c, BIT(17) },
> + [RST_BUS_MMC2] = { 0x84c, BIT(18) },
> + [RST_BUS_SYSDAP] = { 0x88c, BIT(16) },
> + [RST_BUS_UART0] = { 0x90c, BIT(16) },
> + [RST_BUS_UART1] = { 0x90c, BIT(17) },
> + [RST_BUS_UART2] = { 0x90c, BIT(18) },
> + [RST_BUS_UART3] = { 0x90c, BIT(19) },
> + [RST_BUS_UART4] = { 0x90c, BIT(20) },
> + [RST_BUS_UART5] = { 0x90c, BIT(21) },
> + [RST_BUS_UART6] = { 0x90c, BIT(22) },
> + [RST_BUS_UART7] = { 0x90c, BIT(23) },
> + [RST_BUS_I2C0] = { 0x91c, BIT(16) },
> + [RST_BUS_I2C1] = { 0x91c, BIT(17) },
> + [RST_BUS_I2C2] = { 0x91c, BIT(18) },
> + [RST_BUS_I2C3] = { 0x91c, BIT(19) },
> + [RST_BUS_I2C4] = { 0x91c, BIT(20) },
> + [RST_BUS_I2C5] = { 0x91c, BIT(21) },
> + [RST_BUS_CAN] = { 0x92c, BIT(16) },
> + [RST_BUS_SPI0] = { 0x96c, BIT(16) },
> + [RST_BUS_SPI1] = { 0x96c, BIT(17) },
> + [RST_BUS_SPI2] = { 0x96c, BIT(18) },
> + [RST_BUS_SPIFC] = { 0x96c, BIT(19) },
> + [RST_BUS_EMAC0] = { 0x97c, BIT(16) },
> + [RST_BUS_EMAC1] = { 0x98c, BIT(16) | BIT(17) }, /* GMAC1-AXI */
GMAC AXI reset should be separate.
> + [RST_BUS_IR_RX] = { 0x99c, BIT(16) },
> + [RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
> + [RST_BUS_GPADC0] = { 0x9ec, BIT(16) },
> + [RST_BUS_GPADC1] = { 0x9ec, BIT(17) },
> + [RST_BUS_THS] = { 0x9fc, BIT(16) },
> + [RST_USB_PHY0] = { 0xa70, BIT(30) },
> + [RST_USB_PHY1] = { 0xa74, BIT(30) },
> + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
> + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
> + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
> + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
> + [RST_BUS_OTG] = { 0xa8c, BIT(24) },
> + [RST_BUS_3] = { 0xa8c, BIT(25) }, /* BSP + register */
> + [RST_BUS_LRADC] = { 0xa9c, BIT(16) },
> + [RST_BUS_PCIE_USB3] = { 0xaac, BIT(16) },
> + [RST_BUS_DPSS_TOP] = { 0xabc, BIT(16) },
Docs say that there is extra display top reset at 0xacc.
Best regards,
Jernej
> + [RST_BUS_HDMI_MAIN] = { 0xb1c, BIT(16) },
> + [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
> + [RST_BUS_MIPI_DSI0] = { 0xb4c, BIT(16) },
> + [RST_BUS_MIPI_DSI1] = { 0xb4c, BIT(17) },
> + [RST_BUS_TCON_LCD0] = { 0xb7c, BIT(16) },
> + [RST_BUS_TCON_LCD1] = { 0xb7c, BIT(17) },
> + [RST_BUS_TCON_LCD2] = { 0xb7c, BIT(18) },
> + [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
> + [RST_BUS_TCON_TV1] = { 0xb9c, BIT(17) },
> + [RST_BUS_LVDS0] = { 0xbac, BIT(16) },
> + [RST_BUS_LVDS1] = { 0xbac, BIT(17) },
> + [RST_BUS_EDP] = { 0xbbc, BIT(16) },
> + [RST_BUS_VIDEO_OUT0] = { 0xbcc, BIT(16) },
> + [RST_BUS_VIDEO_OUT1] = { 0xbcc, BIT(17) },
> + [RST_BUS_LEDC] = { 0xbfc, BIT(16) },
> + [RST_BUS_CSI] = { 0xc1c, BIT(16) },
> + [RST_BUS_ISP] = { 0xc2c, BIT(16) }, /* BSP + register */
> +};
> +
> static const struct sunxi_ccu_desc sun55i_a523_ccu_desc = {
> .ccu_clks = sun55i_a523_ccu_clks,
> .num_ccu_clks = ARRAY_SIZE(sun55i_a523_ccu_clks),
>
> .hw_clks = &sun55i_a523_hw_clks,
> +
> + .resets = sun55i_a523_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun55i_a523_ccu_resets),
> };
>
> static const u32 pll_regs[] = {
>
Powered by blists - more mailing lists