| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <55a1c2fa3f4248c28e4f06e0432b4252@honor.com>
Date: Tue, 18 Feb 2025 07:13:44 +0000
From: gaoxu <gaoxu2@...or.com>
To: Barry Song <21cnbao@...il.com>
CC: Andrew Morton <akpm@...ux-foundation.org>, "linux-mm@...ck.org"
<linux-mm@...ck.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, Suren Baghdasaryan <surenb@...gle.com>, Yosry
Ahmed <yosry.ahmed@...ux.dev>, yipengxiang <yipengxiang@...or.com>
Subject: 回复: [PATCH v3] mm: Fix possible NULL pointer dereference in __swap_duplicate
>
> Thank you!
>
> On Tue, Feb 18, 2025 at 3:51 PM gaoxu <gaoxu2@...or.com> wrote:
> >
> > >
> > > On Sat, Feb 15, 2025 at 10:05 PM gaoxu <gaoxu2@...or.com> wrote:
> > > >
> > > > Add a NULL check on the return value of swp_swap_info in
> > > > __swap_duplicate to prevent crashes caused by NULL pointer
> dereference.
> > > >
> > > > The reason why swp_swap_info() returns NULL is unclear; it may be
> > > > due to CPU cache issues or DDR bit flips. The probability of this
> > > > issue is very small, and the stack info we encountered is as
> > > > follows：
> > > > Unable to handle kernel NULL pointer dereference at virtual
> > > > address
> > > > 0000000000000058
> > > > [RB/E]rb_sreason_str_set: sreason_str set null_pointer Mem abort info:
> > > > ESR = 0x0000000096000005
> > > > EC = 0x25: DABT (current EL), IL = 32 bits
> > > > SET = 0, FnV = 0
> > > > EA = 0, S1PTW = 0
> > > > FSC = 0x05: level 1 translation fault Data abort info:
> > > > ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
> > > > CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > > > GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k
> > > > pages, 39-bit VAs, pgdp=00000008a80e5000 [0000000000000058]
> > > > pgd=0000000000000000, p4d=0000000000000000,
> > > > pud=0000000000000000
> > > > Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Skip md
> > > > ftrace buffer dump for: 0x1609e0 ...
> > > > pc : swap_duplicate+0x44/0x164
> > > > lr : copy_page_range+0x508/0x1e78
> > > > sp : ffffffc0f2a699e0
> > > > x29: ffffffc0f2a699e0 x28: ffffff8a5b28d388 x27: ffffff8b06603388
> > > > x26: ffffffdf7291fe70 x25: 0000000000000006 x24: 0000000000100073
> > > > x23: 00000000002d2d2f x22: 0000000000000008 x21:
> 0000000000000000
> > > > x20: 00000000002d2d2f x19: 18000000002d2d2f x18: ffffffdf726faec0
> > > > x17: 0000000000000000 x16: 0010000000000001 x15:
> 0040000000000001
> > > > x14: 0400000000000001 x13: ff7ffffffffffb7f x12: ffeffffffffffbff
> > > > x11: ffffff8a5c7e1898 x10: 0000000000000018 x9 : 0000000000000006
> > > > x8 : 1800000000000000 x7 : 0000000000000000 x6 : ffffff8057c01f10
> > > > x5 : 000000000000a318 x4 : 0000000000000000 x3 : 0000000000000000
> > > > x2 : 0000006daf200000 x1 : 0000000000000001 x0 : 18000000002d2d2f
> > > > Call
> > > > trace:
> > > > swap_duplicate+0x44/0x164
> > > > copy_page_range+0x508/0x1e78
> > >
> > > This is really strange since we already have a swap entry check
> > > before calling swap_duplicate().
> > >
> > > copy_nonpresent_pte(struct mm_struct *dst_mm, struct mm_struct
> *src_mm,
> > > pte_t *dst_pte, pte_t *src_pte, struct
> > > vm_area_struct *dst_vma,
> > > struct vm_area_struct *src_vma, unsigned long addr,
> > > int
> > > *rss) {
> > > unsigned long vm_flags = dst_vma->vm_flags;
> > > pte_t orig_pte = ptep_get(src_pte);
> > > pte_t pte = orig_pte;
> > > struct folio *folio;
> > > struct page *page;
> > > swp_entry_t entry = pte_to_swp_entry(orig_pte);
> > >
> > > if (likely(!non_swap_entry(entry))) {
> > > if (swap_duplicate(entry) < 0)
> > > return -EIO; ...
> > > }
> > >
> > > likely the swap_type is larger than MAX_SWAPFILES so we get a NULL?
> > >
> > > static struct swap_info_struct *swap_type_to_swap_info(int type) {
> > > if (type >= MAX_SWAPFILES)
> > > return NULL;
> > >
> > > return READ_ONCE(swap_info[type]); /* rcu_dereference() */ }
> > >
> > > But non_swap_entry() guarantees that swp_type is smaller than
> > > MAX_SWAPFILES.
> > >
> > > static inline int non_swap_entry(swp_entry_t entry) {
> > > return swp_type(entry) >= MAX_SWAPFILES; }
> > >
> > > So another possibility is that we have an overflow of swap_info[]
> > > where type is < MAX_SWAPFILES but is not a valid existing swapfile?
> > In the log of this issue, there is a printed entry: get_swap_device:
> > Bad swap file entry 18000000002d2d2f.
> > It can be calculated that swp_type(18000000002d2d2f) = 6.
> > In the Android 15-linux6.6:
> > system: MAX_SWAPFILES = 28, nr_swapfiles = 1.
> > Since swp_type(18000000002d2d2f)=6 is less than MAX_SWAPFILES but
> > greater than nr_swapfiles, the value of this entry is abnormal.
> >
> > static unsigned int nr_swapfiles;
> > static struct swap_info_struct *swap_info[MAX_SWAPFILES]; swap_info is
> > a static array, with its values initialized to 0.
> > The size of the array is MAX_SWAPFILES, and the size of valid values
> > in the array is nr_swapfiles. Therefore, when we validate the validity
> > of swp_type(entry), we should compare it with nr_swapfiles, not
> MAX_SWAPFILES.
> > The code for validating swp_type may need to be modified as follows:
>
> That might be true, but on a normal system, we only need to distinguish
> between a swap entry and a migrate entry. Therefore, comparing with
> MAX_SWAPFILES is sufficient.
>
> > static inline int non_swap_entry(swp_entry_t entry) {
> > - return swp_type(entry) >= MAX_SWAPFILES;
> > + return swp_type(entry) >= nr_swapfiles;
> > }
> >
> > static struct swap_info_struct *swap_type_to_swap_info(int type) {
> > - if (type >= MAX_SWAPFILES)
> > + if (type >= nr_swapfiles)
> > return NULL;
> >
> > return READ_ONCE(swap_info[type]); /* rcu_dereference() */ }
> > >
> > > I don't see how the current patch contributes to debugging or fixing
> > > anything related to this dumped stack. Can we dump swp_type() as well?
> > >
> > > > copy_process+0x1278/0x21cc
> > > > kernel_clone+0x90/0x438
> > > > __arm64_sys_clone+0x5c/0x8c
> > > > invoke_syscall+0x58/0x110
> > > > do_el0_svc+0x8c/0xe0
> > > > el0_svc+0x38/0x9c
> > > > el0t_64_sync_handler+0x44/0xec
> > > > el0t_64_sync+0x1a8/0x1ac
> > > > Code: 9139c35a 71006f3f 54000568 f8797b55 (f9402ea8) ---[ end
> > > > trace
> > > > 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal
> > > > exception
> > > > SMP: stopping secondary CPUs
> > > >
> > > > The patch seems to only provide a workaround, but there are no
> > > > more effective software solutions to handle the bit flips problem.
> > > > This path will change the issue from a system crash to a process
> > > > exception, thereby reducing the impact on the entire machine.
> > > >
> > > > Signed-off-by: gao xu <gaoxu2@...or.com>
> > > > ---
> > > > v1 -> v2:
> > > > - Add WARN_ON_ONCE.
> > > > - update the commit info.
> > > > v2 -> v3: Delete the review tags (This is my issue, and I apologize).
> > > > ---
> > > >
> > > > mm/swapfile.c | 2 ++
> > > > 1 file changed, 2 insertions(+)
> > > >
> > > > diff --git a/mm/swapfile.c b/mm/swapfile.c index
> > > > 7448a3876..a0bfdba94
> > > > 100644
> > > > --- a/mm/swapfile.c
> > > > +++ b/mm/swapfile.c
> > > > @@ -3521,6 +3521,8 @@ static int __swap_duplicate(swp_entry_t
> > > > entry,
> > > unsigned char usage, int nr)
> > > > int err, i;
> > > >
> > > > si = swp_swap_info(entry);
> > > > + if (WARN_ON_ONCE(!si))
> > >
> > > I mean, printk something related to swp_type(). This is really
> > > strange, but the current stack won't help with debugging.
> > The log can find info related to "get_swap_device: Bad swap file entry xxx"
> > when an entry encounters an exception.
> > Add a print info log like the following:
> > pr_err("%s%08d\n", Bad swap type, swp_type(entry));
>
> This is really strange. It would be better to have the entire PTE value dumped so
> we can determine if a bit-flip occurred on critical bits like PTE_PRESENT.
Do you mean to convert the SWP entry to PTE and then print it out?
pr_err("%s%08lx\n", Bad pte, pte_val(swp_entry_to_pte(entry)));
Or is it sufficient to print the SWP entry directly?
pr_err("%s%08lx\n", Bad swap entry, entry.val);
>
> In that case, a present PTE could be misinterpreted as a swap entry.
>
> On arm64,
> /*
> * Encode and decode a swap entry:
> * bits 0-1: present (must be zero)
> * bits 2: remember PG_anon_exclusive
> * bits 3-7: swap type
> * bits 8-57: swap offset
> * bit 58: PTE_PROT_NONE (must be zero)
> */
>
> #define __SWP_TYPE_SHIFT 3
> #define __SWP_TYPE_BITS 5
> #define __SWP_OFFSET_BITS 50
> #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
> #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS +
> __SWP_TYPE_SHIFT)
> #define __SWP_OFFSET_MASK ((1UL << __SWP_OFFSET_BITS) - 1)
>
> _swp_type is bits3-7.
>
> For a present pte, bits 3-7 are:
> AP[7-6], NS[5], AttributeIndex[4-2].
>
> > >
> > > > + return -EINVAL;
> > > >
> > > > offset = swp_offset(entry);
> > > > VM_WARN_ON(nr > SWAPFILE_CLUSTER - offset %
> > > SWAPFILE_CLUSTER);
> > > > --
> > > > 2.17.1
>
> Thanks
> Barry
Powered by blists - more mailing lists