[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a1112ce0-c3d8-4765-8b80-5fb31e2cfcc5@kernel.org>
Date: Tue, 18 Feb 2025 08:49:46 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Kyle Hendry <kylehendrydev@...il.com>, Lee Jones <lee@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Heiner Kallweit <hkallweit1@...il.com>, Russell King
<linux@...linux.org.uk>, Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>, Fernández Rojas
<noltari@...il.com>, Jonas Gorski <jonas.gorski@...il.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [PATCH v2 1/5] net: phy: bcm63xx: add support for BCM63268 GPHY
On 18/02/2025 02:36, Kyle Hendry wrote:
> This patch adds support for the internal gigabit PHY on the
> BCM63268 SoC. The PHY has a low power mode that has can be
> enabled/disabled through the GPHY control register. The
> register is passed in through the device tree, and the
> relevant bits are set in the suspend and resume functions.
>
> Signed-off-by: Kyle Hendry <kylehendrydev@...il.com>
> ---
> drivers/net/phy/bcm63xx.c | 96 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
Also two more nits:
>
> diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
> index b46a736a3130..613c3da315ac 100644
> --- a/drivers/net/phy/bcm63xx.c
> +++ b/drivers/net/phy/bcm63xx.c
> @@ -3,8 +3,11 @@
> * Driver for Broadcom 63xx SOCs integrated PHYs
> */
> #include "bcm-phy-lib.h"
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/phy.h>
> +#include <linux/regmap.h>
> +
>
No need for new line.
> #define MII_BCM63XX_IR 0x1a /* interrupt register */
> #define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */
> @@ -13,10 +16,19 @@
> #define MII_BCM63XX_IR_LINK 0x0200 /* link changed */
> #define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */
>
> +#define PHY_ID_BCM63268_GPHY 0x03625f50
> +
> +#define GPHY_CTRL_IDDQ_BIAS BIT(0)
> +#define GPHY_CTRL_LOW_PWR BIT(3)
> +
> MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver");
> MODULE_AUTHOR("Maxime Bizon <mbizon@...ebox.fr>");
> MODULE_LICENSE("GPL");
>
> +struct bcm_gphy_priv {
> + struct regmap *gphy_ctrl;
Messed indentation.
> +};
> +
> static int bcm63xx_config_intr(struct phy_device *phydev)
> {
> int reg, err;
> @@ -69,6 +81,80 @@ static int bcm63xx_config_init(struct phy_device *phydev)
> return phy_write(phydev, MII_BCM63XX_IR, reg);
> }
Best regards,
Krzysztof
Powered by blists - more mailing lists