| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250219225130.GA3107198-robh@kernel.org>
Date: Wed, 19 Feb 2025 16:51:30 -0600
From: Rob Herring <robh@...nel.org>
To: parvathi <parvathi@...thit.com>
Cc: danishanwar@...com, rogerq@...nel.org, andrew+netdev@...n.ch,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, krzk+dt@...nel.org, conor+dt@...nel.org,
nm@...com, ssantosh@...nel.org, richardcochran@...il.com,
basharath@...thit.com, schnelle@...ux.ibm.com,
diogo.ivo@...mens.com, m-karicheri2@...com, horms@...nel.org,
jacob.e.keller@...el.com, m-malladi@...com,
javier.carrasco.cruz@...il.com, afd@...com, s-anna@...com,
linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
pratheesh@...com, prajith@...com, vigneshr@...com, praneeth@...com,
srk@...com, rogerq@...com, krishna@...thit.com, pmohan@...thit.com,
mohan@...thit.com
Subject: Re: [PATCH net-next v3 01/10] dt-bindings: net: ti: Adds DUAL-EMAC
mode support on PRU-ICSS2 for AM57xx SOCs
On Fri, Feb 14, 2025 at 11:16:53AM +0530, parvathi wrote:
> From: Parvathi Pudi <parvathi@...thit.com>
>
> Documentation update for the newly added "pruss2_eth" device tree
> node and its dependencies along with compatibility for PRU-ICSS
> Industrial Ethernet Peripheral (IEP), PRU-ICSS Enhanced Capture
> (eCAP) peripheral and using YAML binding document for AM57xx SoCs.
>
> Signed-off-by: Parvathi Pudi <parvathi@...thit.com>
> Signed-off-by: Basharath Hussain Khaja <basharath@...thit.com>
The sender of the patch S-o-b goes last. And maybe you want a
Co-developed-by tag here too?
> ---
> .../devicetree/bindings/net/ti,icss-iep.yaml | 4 +-
> .../bindings/net/ti,icssm-prueth.yaml | 147 ++++++++++++++++++
> .../bindings/net/ti,pruss-ecap.yaml | 32 ++++
> .../devicetree/bindings/soc/ti/ti,pruss.yaml | 9 ++
> 4 files changed, 191 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
> create mode 100644 Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
> index e36e3a622904..858d74638167 100644
> --- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
> @@ -8,6 +8,8 @@ title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module
>
> maintainers:
> - Md Danish Anwar <danishanwar@...com>
> + - Parvathi Pudi <parvathi@...thit.com>
> + - Basharath Hussain Khaja <basharath@...thit.com>
>
> properties:
> compatible:
> @@ -19,7 +21,7 @@ properties:
> - const: ti,am654-icss-iep
>
> - const: ti,am654-icss-iep
> -
> + - const: ti,am5728-icss-iep
Use enum adding to the prior entry.
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
> new file mode 100644
> index 000000000000..1dffa6bd7a88
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
> @@ -0,0 +1,147 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,icssm-prueth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments ICSSM PRUSS Ethernet
> +
> +maintainers:
> + - Roger Quadros <rogerq@...com>
> + - Andrew F. Davis <afd@...com>
> + - Parvathi Pudi <parvathi@...thit.com>
> + - Basharath Hussain Khaja <basharath@...thit.com>
> +
> +description:
> + Ethernet based on the Programmable Real-Time Unit and Industrial
> + Communication Subsystem.
> +
> +properties:
> + compatible:
> + enum:
> + - ti,am57-prueth # for AM57x SoC family
> +
> + sram:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to OCMC SRAM node
> +
> + ti,mii-rt:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to MII_RT module's syscon regmap
> +
> + ti,iep:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to IEP (Industrial Ethernet Peripheral) for ICSS
> +
> + ti,ecap:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to Enhanced Capture (eCAP) event for ICSS
> +
> + interrupts:
> + items:
> + - description: High priority Rx Interrupt specifier.
> + - description: Low priority Rx Interrupt specifier.
> +
> + interrupt-names:
> + items:
> + - const: rx_hp
> + - const: rx_lp
> +
> + ethernet-ports:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + ^ethernet-port@[0-1]$:
> + type: object
> + description: ICSSM PRUETH external ports
> + $ref: ethernet-controller.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + items:
> + - enum: [0, 1]
> + description: ICSSM PRUETH port number
> +
> + interrupts:
> + maxItems: 3
> +
> + interrupt-names:
> + items:
> + - const: rx
> + - const: emac_ptp_tx
> + - const: hsr_ptp_tx
> +
> + required:
> + - reg
> +
> + anyOf:
> + - required:
> + - ethernet-port@0
> + - required:
> + - ethernet-port@1
> +
> +required:
> + - compatible
> + - sram
> + - ti,mii-rt
> + - ti,iep
> + - ti,ecap
> + - ethernet-ports
> + - interrupts
> + - interrupt-names
> +
> +allOf:
> + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + /* Dual-MAC Ethernet application node on PRU-ICSS2 */
> + pruss2_eth: pruss2-eth {
Drop unused labels.
> + compatible = "ti,am57-prueth";
> + ti,prus = <&pru2_0>, <&pru2_1>;
> + sram = <&ocmcram1>;
> + ti,mii-rt = <&pruss2_mii_rt>;
> + ti,iep = <&pruss2_iep>;
> + ti,ecap = <&pruss2_ecap>;
> + interrupts = <20 2 2>, <21 3 3>;
> + interrupt-names = "rx_hp", "rx_lp";
> + interrupt-parent = <&pruss2_intc>;
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pruss2_emac0: ethernet-port@0 {
> + reg = <0>;
> + phy-handle = <&pruss2_eth0_phy>;
> + phy-mode = "mii";
> + interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
> + interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
> + /* Filled in by bootloader */
> + local-mac-address = [00 00 00 00 00 00];
> + };
> +
> + pruss2_emac1: ethernet-port@1 {
> + reg = <1>;
> + phy-handle = <&pruss2_eth1_phy>;
> + phy-mode = "mii";
> + interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
> + interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
> + /* Filled in by bootloader */
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
> new file mode 100644
> index 000000000000..42f217099b2e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
> @@ -0,0 +1,32 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,pruss-ecap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments PRU-ICSS Enhanced Capture (eCAP) event module
> +
> +maintainers:
> + - Murali Karicheri <m-karicheri2@...com>
> + - Parvathi Pudi <parvathi@...thit.com>
> + - Basharath Hussain Khaja <basharath@...thit.com>
> +
> +properties:
> + compatible:
> + const: ti,pruss-ecap
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + pruss2_ecap: ecap@...00 {
> + compatible = "ti,pruss-ecap";
> + reg = <0x30000 0x60>;
> + };
> diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> index 927b3200e29e..594f54264a8c 100644
> --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> @@ -251,6 +251,15 @@ patternProperties:
>
> type: object
>
> + ecap@[a-f0-9]+$:
> + description:
> + PRU-ICSS has a Enhanced Capture (eCAP) event module which can generate
> + and capture periodic timer based events which will be used for features
> + like RX Pacing to rise interrupt when the timer event has occurred.
> + Each PRU-ICSS instance has one eCAP modeule irrespective of SOCs.
> +
> + type: object
> +
> mii-rt@[a-f0-9]+$:
> description: |
> Real-Time Ethernet to support multiple industrial communication protocols.
> --
> 2.34.1
>
Powered by blists - more mailing lists