[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Z7WleP9v6Igx2MjC@shell.armlinux.org.uk>
Date: Wed, 19 Feb 2025 09:33:44 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Sky Huang <SkyLake.Huang@...iatek.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Daniel Golle <daniel@...rotopia.org>,
Qingfang Deng <dqfext@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Simon Horman <horms@...nel.org>, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Steven Liu <Steven.Liu@...iatek.com>
Subject: Re: [PATCH net-next v2 3/3] net: phy: mediatek: add driver for
built-in 2.5G ethernet PHY on MT7988
On Wed, Feb 19, 2025 at 04:39:10PM +0800, Sky Huang wrote:
> +static int mt798x_2p5ge_phy_config_init(struct phy_device *phydev)
> +{
> + struct pinctrl *pinctrl;
> + int ret;
> +
> + /* Check if PHY interface type is compatible */
> + if (phydev->interface != PHY_INTERFACE_MODE_INTERNAL)
> + return -ENODEV;
> +
> + ret = mt798x_2p5ge_phy_load_fw(phydev);
> + if (ret < 0)
> + return ret;
Firmware should not be loaded in the .config_init method. The above
call will block while holding the RTNL which will prevent all other
network configuration until the firmware has been loaded or the load
fails.
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists