| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <364a8fbd-d78e-421d-a37b-cb7a29077802@zohomail.com>
Date: Thu, 20 Feb 2025 23:07:35 +0800
From: Xukai Wang <kingxukai@...omail.com>
To: Stephen Boyd <sboyd@...nel.org>, Albert Ou <aou@...s.berkeley.edu>,
Conor Dooley <conor+dt@...nel.org>, Conor Dooley <conor@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Palmer Dabbelt <palmer@...belt.com>, Paul Walmsley
<paul.walmsley@...ive.com>, Rob Herring <robh@...nel.org>
Cc: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
Samuel Holland <samuel.holland@...ive.com>,
Troy Mitchell <TroyMitchell988@...il.com>
Subject: Re: [PATCH v4 2/3] clk: canaan: Add clock driver for Canaan K230
On 2025/2/19 05:48, Stephen Boyd wrote:
> Quoting Xukai Wang (2025-02-17 06:45:17)
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 299bc678ed1b9fcd9110bb8c5937a1bd1ea60e23..f63355ab8adeeee90d29d1a975607f5dc0a58bd6 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -464,6 +464,12 @@ config COMMON_CLK_K210
>> help
>> Support for the Canaan Kendryte K210 RISC-V SoC clocks.
>>
>> +config COMMON_CLK_K230
>> + bool "Clock driver for the Canaan Kendryte K230 SoC"
>> + depends on OF && (ARCH_CANAAN || COMPILE_TEST)
> It doesn't depend on OF to build from what I can tell. This should
> simply be
>
> depends on ARCH_CANAAN || COMPILE_TEST
>
> right?
right, it doesn't depend on OF.
>
>> + help
>> + Support for the Canaan Kendryte K230 RISC-V SoC clocks.
>> +
>> config COMMON_CLK_SP7021
>> tristate "Clock driver for Sunplus SP7021 SoC"
>> depends on SOC_SP7021 || COMPILE_TEST
>> diff --git a/drivers/clk/clk-k230.c b/drivers/clk/clk-k230.c
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..017ecad9ec47ed751f75fe5197aa119ae35e05f9
>> --- /dev/null
>> +++ b/drivers/clk/clk-k230.c
>> @@ -0,0 +1,1347 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Kendryte Canaan K230 Clock Drivers
>> + *
>> + * Author: Xukai Wang <kingxukai@...omail.com>
>> + * Author: Troy Mitchell <troymitchell988@...il.com>
>> + */
>> +
>> +#include <dt-bindings/clock/canaan,k230-clk.h>
> Please put dt-bindigns at the end of the include list.
OK, thanks for reminder.
>> +#include <linux/clk.h>
> Is this include used? Ideally a clk provider (clk-provider.h) isn't also
> a clk consumer (clk.h).
Here I use `clk_prepare_enable()` in `k230_pll_init()` to enable the
software if the hardware is automatically enabled.
>> +#include <linux/clkdev.h>
> Hopefully clkdev isn't used.
I use devm_clk_hw_register_clkdev() below and am explained why it was
used. Please check.
>> +#include <linux/clk-provider.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
> Is this include used?
Apologies, I'll drop it.
>> +#include <linux/platform_device.h>
>> +#include <linux/spinlock.h>
> Need to include mod_devicetable.h
Yes, it should be.
>> +
>> +/* PLL control register bits. */
>> +#define K230_PLL_BYPASS_ENABLE BIT(19)
>> +#define K230_PLL_GATE_ENABLE BIT(2)
>> +#define K230_PLL_GATE_WRITE_ENABLE BIT(18)
>> +#define K230_PLL_OD_SHIFT 24
>> +#define K230_PLL_OD_MASK 0xF
>> +#define K230_PLL_R_SHIFT 16
>> +#define K230_PLL_R_MASK 0x3F
>> +#define K230_PLL_F_SHIFT 0
>> +#define K230_PLL_F_MASK 0x1FFFF
>> +#define K230_PLL0_OFFSET_BASE 0x00
>> +#define K230_PLL1_OFFSET_BASE 0x10
>> +#define K230_PLL2_OFFSET_BASE 0x20
>> +#define K230_PLL3_OFFSET_BASE 0x30
>> +#define K230_PLL_DIV_REG_OFFSET 0x00
>> +#define K230_PLL_BYPASS_REG_OFFSET 0x04
>> +#define K230_PLL_GATE_REG_OFFSET 0x08
>> +#define K230_PLL_LOCK_REG_OFFSET 0x0C
>> +
>> +/* PLL lock register bits. */
>> +#define K230_PLL_STATUS_MASK BIT(0)
>> +
>> +/* K230 CLK registers offset */
>> +#define K230_CLK_AUDIO_CLKDIV_OFFSET 0x34
>> +#define K230_CLK_PDM_CLKDIV_OFFSET 0x40
>> +#define K230_CLK_CODEC_ADC_MCLKDIV_OFFSET 0x38
>> +#define K230_CLK_CODEC_DAC_MCLKDIV_OFFSET 0x3c
>> +
>> +/* K230 CLK OPS. */
>> +#define K230_CLK_OPS_GATE \
>> + .enable = k230_clk_enable, \
>> + .disable = k230_clk_disable, \
>> + .is_enabled = k230_clk_is_enabled
>> +
>> +#define K230_CLK_OPS_RATE \
>> + .set_rate = k230_clk_set_rate, \
>> + .round_rate = k230_clk_round_rate, \
>> + .recalc_rate = k230_clk_get_rate
>> +
>> +#define K230_CLK_OPS_MUX \
>> + .set_parent = k230_clk_set_parent, \
>> + .get_parent = k230_clk_get_parent, \
>> + .determine_rate = clk_hw_determine_rate_no_reparent
>> +
>> +#define K230_CLK_OPS_ID_NONE 0
>> +#define K230_CLK_OPS_ID_GATE_ONLY 1
>> +#define K230_CLK_OPS_ID_RATE_ONLY 2
>> +#define K230_CLK_OPS_ID_RATE_GATE 3
>> +#define K230_CLK_OPS_ID_MUX_ONLY 4
>> +#define K230_CLK_OPS_ID_MUX_GATE 5
>> +#define K230_CLK_OPS_ID_MUX_RATE 6
>> +#define K230_CLK_OPS_ID_ALL 7
>> +#define K230_CLK_OPS_ID_NUM 8
>> +
>> +/* K230 CLK MACROS */
>> +#define K230_CLK_MAX_PARENT_NUM 6
>> +
>> +#define K230_GATE_FORMAT(_reg, _bit, _reverse, _have_gate) \
>> + .gate_reg_off = (_reg), \
>> + .gate_bit_enable = (_bit), \
>> + .gate_bit_reverse = (_reverse), \
>> + .have_gate = (_have_gate)
>> +
>> +#define K230_RATE_FORMAT(_mul_min, _mul_max, _mul_shift, _mul_mask, \
>> + _div_min, _div_max, _div_shift, _div_mask, \
>> + _reg, _bit, _method, _reg_c, _bit_c, \
>> + _mul_min_c, _mul_max_c, _mul_shift_c, _mul_mask_c, \
>> + _have_rate, _have_rate_c) \
>> + .rate_mul_min = (_mul_min), \
>> + .rate_mul_max = (_mul_max), \
>> + .rate_mul_shift = (_mul_shift), \
>> + .rate_mul_mask = (_mul_mask), \
>> + .rate_mul_min_c = (_mul_min_c), \
>> + .rate_mul_max_c = (_mul_max_c), \
>> + .rate_mul_shift_c = (_mul_shift_c), \
>> + .rate_mul_mask_c = (_mul_mask_c), \
>> + .rate_div_min = (_div_min), \
>> + .rate_div_max = (_div_max), \
>> + .rate_div_shift = (_div_shift), \
>> + .rate_div_mask = (_div_mask), \
>> + .rate_reg_off = (_reg), \
>> + .rate_reg_off_c = (_reg_c), \
>> + .rate_write_enable_bit = (_bit), \
>> + .rate_write_enable_bit_c = (_bit_c), \
>> + .method = (_method), \
>> + .have_rate = (_have_rate), \
>> + .have_rate_c = (_have_rate_c)
>> +
>> +#define K230_MUX_FORMAT(_reg, _shift, _mask, _have_mux) \
>> + .mux_reg_off = (_reg), \
>> + .mux_reg_shift = (_shift), \
>> + .mux_reg_mask = (_mask), \
>> + .have_mux = (_have_mux)
>> +
>> +#define K230_GATE_FORMAT_ZERO K230_GATE_FORMAT(0, 0, 0, false)
>> +#define K230_RATE_FORMAT_ZERO K230_RATE_FORMAT(0, 0, 0, 0, 0, 0, \
>> + 0, 0, 0, 0, 0, 0, \
>> + 0, 0, 0, 0, 0, false, false)
>> +#define K230_MUX_FORMAT_ZERO K230_MUX_FORMAT(0, 0, 0, false)
>> +
>> +struct k230_sysclk;
>> +
>> +/* K230 PLLs. */
>> +enum k230_pll_id {
>> + K230_PLL0, K230_PLL1, K230_PLL2, K230_PLL3, K230_PLL_NUM
>> +};
>> +
>> +struct k230_pll {
>> + enum k230_pll_id id;
>> + struct k230_sysclk *ksc;
>> + void __iomem *div, *bypass, *gate, *lock;
>> + struct clk_hw hw;
>> +};
>> +
>> +#define to_k230_pll(_hw) container_of(_hw, struct k230_pll, hw)
>> +
>> +struct k230_pll_cfg {
>> + u32 reg;
>> + enum k230_pll_id pll_id;
>> + const char *name;
>> +};
>> +
>> +/* K230 PLL_DIVS. */
>> +struct k230_pll_div {
>> + struct k230_sysclk *ksc;
>> + struct clk_hw *hw;
>> +};
>> +
>> +struct k230_pll_div_cfg {
>> + const char *parent_name, *name;
>> + int div;
>> +};
>> +
>> +enum k230_pll_div_id {
>> + K230_PLL0_DIV2,
>> + K230_PLL0_DIV3,
>> + K230_PLL0_DIV4,
>> + K230_PLL1_DIV2,
>> + K230_PLL1_DIV3,
>> + K230_PLL1_DIV4,
>> + K230_PLL2_DIV2,
>> + K230_PLL2_DIV3,
>> + K230_PLL2_DIV4,
>> + K230_PLL3_DIV2,
>> + K230_PLL3_DIV3,
>> + K230_PLL3_DIV4,
>> + K230_PLL_DIV_NUM
>> +};
>> +
>> +enum k230_clk_div_type {
>> + K230_MUL,
>> + K230_DIV,
>> + K230_MUL_DIV,
>> +};
>> +
>> +/* K230 CLKS. */
>> +struct k230_clk {
>> + int id;
>> + struct k230_sysclk *ksc;
>> + struct clk_hw hw;
>> +};
>> +
>> +#define to_k230_clk(_hw) container_of(_hw, struct k230_clk, hw)
>> +
>> +enum k230_clk_parent_type {
>> + K230_OSC24M,
>> + K230_PLL,
>> + K230_PLL_DIV,
>> + K230_CLK_COMPOSITE,
>> +};
>> +
>> +struct k230_clk_parent {
>> + enum k230_clk_parent_type type;
>> + union {
>> + enum k230_pll_div_id pll_div_id;
>> + enum k230_pll_id pll_id;
>> + int clk_id;
>> + };
>> +};
>> +
>> +struct k230_clk_cfg {
>> + /* attr */
>> + const char *name;
>> + /* 0-read & write; 1-read only */
>> + bool read_only;
>> + int num_parent;
>> + struct k230_clk_parent parent[K230_CLK_MAX_PARENT_NUM];
>> + bool status;
>> + int flags;
>> +
>> + /* rate reg */
>> + u32 rate_reg_off;
>> + u32 rate_reg_off_c;
>> + void __iomem *rate_reg;
>> + void __iomem *rate_reg_c;
>> + /* rate info*/
>> + u32 rate_write_enable_bit;
>> + u32 rate_write_enable_bit_c;
>> + enum k230_clk_div_type method;
>> + bool have_rate;
>> + bool have_rate_c;
>> + /* rate mul */
>> + u32 rate_mul_min;
>> + u32 rate_mul_max;
>> + u32 rate_mul_shift;
>> + u32 rate_mul_mask;
>> + /* rate mul-changable */
>> + u32 rate_mul_min_c;
>> + u32 rate_mul_max_c;
>> + u32 rate_mul_shift_c;
>> + u32 rate_mul_mask_c;
>> + /* rate div */
>> + u32 rate_div_min;
>> + u32 rate_div_max;
>> + u32 rate_div_shift;
>> + u32 rate_div_mask;
>> +
>> + /* gate reg */
>> + u32 gate_reg_off;
>> + void __iomem *gate_reg;
>> + /* gate info*/
>> + bool have_gate;
>> + u32 gate_bit_enable;
>> + u32 gate_bit_reverse;
>> +
>> + /* mux reg */
>> + u32 mux_reg_off;
>> + void __iomem *mux_reg;
>> + /* mux info */
>> + bool have_mux;
>> + u32 mux_reg_shift;
>> + u32 mux_reg_mask;
>> +};
>> +
>> +/* K230 SYSCLK. */
>> +struct k230_sysclk {
>> + struct platform_device *pdev;
>> + void __iomem *pll_regs, *regs;
>> + spinlock_t pll_lock, clk_lock;
>> + struct k230_pll *plls;
>> + struct k230_clk *clks;
>> + struct k230_pll_div *dclks;
>> +};
>> +
>> +static const struct k230_pll_cfg k230_pll_cfgs[] = {
>> + [K230_PLL0] = {
>> + .reg = K230_PLL0_OFFSET_BASE,
>> + .pll_id = K230_PLL0,
>> + .name = "pll0",
>> + },
>> + [K230_PLL1] = {
>> + .reg = K230_PLL1_OFFSET_BASE,
>> + .pll_id = K230_PLL1,
>> + .name = "pll1",
>> + },
>> + [K230_PLL2] = {
>> + .reg = K230_PLL2_OFFSET_BASE,
>> + .pll_id = K230_PLL2,
>> + .name = "pll2",
>> + },
>> + [K230_PLL3] = {
>> + .reg = K230_PLL3_OFFSET_BASE,
>> + .pll_id = K230_PLL3,
>> + .name = "pll3",
>> + },
>> +};
>> +
>> +static const struct k230_pll_div_cfg k230_pll_div_cfgs[] = {
>> + [K230_PLL0_DIV2] = { "pll0", "pll0_div2", 2},
>> + [K230_PLL0_DIV3] = { "pll0", "pll0_div3", 3},
>> + [K230_PLL0_DIV4] = { "pll0", "pll0_div4", 4},
>> + [K230_PLL1_DIV2] = { "pll1", "pll1_div2", 2},
>> + [K230_PLL1_DIV3] = { "pll1", "pll1_div3", 3},
>> + [K230_PLL1_DIV4] = { "pll1", "pll1_div4", 4},
>> + [K230_PLL2_DIV2] = { "pll2", "pll2_div2", 2},
>> + [K230_PLL2_DIV3] = { "pll2", "pll2_div3", 3},
>> + [K230_PLL2_DIV4] = { "pll2", "pll2_div4", 4},
>> + [K230_PLL3_DIV2] = { "pll3", "pll3_div2", 2},
>> + [K230_PLL3_DIV3] = { "pll3", "pll3_div3", 3},
>> + [K230_PLL3_DIV4] = { "pll3", "pll3_div4", 4},
>> +};
>> +
>> +static struct k230_clk_cfg k230_clk_cfgs[] = {
>> + [K230_CPU0_SRC] = {
> Can these be named variables instead of array elements? Then we can map
> quickly to parents instead of going through an intermediate enum.
Yes, using named variables instead of array elements is a quick approach
to map parents.
However, I wonder how to access similar struct members without redundant
code. Would it be appropriate to use `struct list_head` to simplify
looping and access these members more efficiently?
>> + .name = "cpu0_src",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 1,
>> + .parent[0] = {
>> + .type = K230_PLL_DIV,
>> + .pll_div_id = K230_PLL0_DIV2,
>> + },
>> + K230_RATE_FORMAT(1, 16, 0, 0,
>> + 16, 16, 1, 0xF,
>> + 0x0, 31, K230_MUL, 0, 0,
>> + 0, 0, 0, 0,
>> + true, false),
>> + K230_GATE_FORMAT(0, 0, 0, true),
>> + K230_MUX_FORMAT_ZERO,
>> + },
>> + [K230_CPU0_ACLK] = {
>> + .name = "cpu0_aclk",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 1,
>> + .parent[0] = {
>> + .type = K230_CLK_COMPOSITE,
>> + .clk_id = K230_CPU0_SRC,
>> + },
>> + K230_RATE_FORMAT(1, 1, 0, 0,
>> + 1, 8, 7, 0x7,
>> + 0x0, 31, K230_MUL, 0, 0,
>> + 0, 0, 0, 0,
>> + true, false),
>> + K230_GATE_FORMAT_ZERO,
>> + K230_MUX_FORMAT_ZERO,
>> + },
>> + [K230_CPU0_PLIC] = {
>> + .name = "cpu0_plic",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 1,
>> + .parent[0] = {
>> + .type = K230_CLK_COMPOSITE,
>> + .clk_id = K230_CPU0_SRC,
>> + },
>> + K230_RATE_FORMAT(1, 1, 0, 0,
>> + 1, 8, 10, 0x7,
>> + 0x0, 31, K230_DIV, 0, 0,
>> + 0, 0, 0, 0,
>> + true, false),
>> + K230_GATE_FORMAT(0, 9, 0, true),
>> + K230_MUX_FORMAT_ZERO,
>> + },
>> + [K230_CPU0_NOC_DDRCP4] = {
>> + .name = "cpu0_noc_ddrcp4",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 1,
>> + .parent[0] = {
>> + .type = K230_CLK_COMPOSITE,
>> + .clk_id = K230_CPU0_SRC,
>> + },
>> + K230_RATE_FORMAT_ZERO,
>> + K230_GATE_FORMAT(0x60, 7, 0, true),
>> + K230_MUX_FORMAT_ZERO,
>> + },
>> + [K230_CPU0_PCLK] = {
>> + .name = "cpu0_pclk",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 1,
>> + .parent[0] = {
>> + .type = K230_PLL_DIV,
>> + .pll_div_id = K230_PLL0_DIV4,
>> + },
>> + K230_RATE_FORMAT(1, 1, 0, 0,
>> + 1, 8, 15, 0x7,
>> + 0x0, 31, K230_DIV, 0, 0,
>> + 0, 0, 0, 0,
>> + true, false),
>> + K230_GATE_FORMAT(0, 13, 0, true),
>> + K230_MUX_FORMAT_ZERO,
>> + },
>> + [K230_PMU_PCLK] = {
>> + .name = "pmu_pclk",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 1,
>> + .parent[0] = {
>> + .type = K230_OSC24M,
>> + },
>> + K230_RATE_FORMAT_ZERO,
>> + K230_GATE_FORMAT(0x10, 0, 0, true),
>> + K230_MUX_FORMAT_ZERO,
>> + },
>> + [K230_HS_OSPI_SRC] = {
>> + .name = "hs_ospi_src",
>> + .read_only = false,
>> + .flags = 0,
>> + .status = true,
>> + .num_parent = 2,
>> + .parent[0] = {
>> + .type = K230_PLL_DIV,
>> + .pll_div_id = K230_PLL0_DIV2,
>> + },
>> + .parent[1] = {
>> + .type = K230_PLL_DIV,
>> + .pll_div_id = K230_PLL2_DIV4,
>> + },
>> + K230_RATE_FORMAT_ZERO,
>> + K230_GATE_FORMAT(0x18, 24, 0, true),
>> + K230_MUX_FORMAT(0x20, 18, 0x1, true),
>> + },
>> +};
>> +
>> +#define K230_CLK_NUM ARRAY_SIZE(k230_clk_cfgs)
>> +
>> +static void k230_init_pll(void __iomem *regs, enum k230_pll_id pll_id,
>> + struct k230_pll *pll)
>> +{
>> + void __iomem *base;
>> +
>> + pll->id = pll_id;
>> + base = regs + k230_pll_cfgs[pll_id].reg;
>> + pll->div = base + K230_PLL_DIV_REG_OFFSET;
>> + pll->bypass = base + K230_PLL_BYPASS_REG_OFFSET;
>> + pll->gate = base + K230_PLL_GATE_REG_OFFSET;
>> + pll->lock = base + K230_PLL_LOCK_REG_OFFSET;
>> +}
>> +
>> +static int k230_pll_prepare(struct clk_hw *hw)
>> +{
>> + struct k230_pll *pll = to_k230_pll(hw);
>> + u32 reg;
>> +
>> + /* wait for PLL lock until it reachs lock status */
> s/reachs/reaches/
Apologies, I'll modify it.
>> + return readl_poll_timeout(pll->lock, reg,
>> + (reg & K230_PLL_STATUS_MASK) == K230_PLL_STATUS_MASK,
>> + 400, 0);
>> +}
>> +
>> +static bool k230_pll_hw_is_enabled(struct k230_pll *pll)
>> +{
>> + return (readl(pll->gate) & K230_PLL_GATE_ENABLE) == K230_PLL_GATE_ENABLE;
>> +}
>> +
>> +static void k230_pll_enable_hw(void __iomem *regs, struct k230_pll *pll)
>> +{
>> + u32 reg;
>> +
>> + if (k230_pll_hw_is_enabled(pll))
>> + return;
>> +
>> + /* Set PLL factors */
>> + reg = readl(pll->gate);
>> + reg |= (K230_PLL_GATE_ENABLE | K230_PLL_GATE_WRITE_ENABLE);
>> + writel(reg, pll->gate);
>> +}
>> +
>> +static int k230_pll_enable(struct clk_hw *hw)
>> +{
>> + struct k230_pll *pll = to_k230_pll(hw);
>> + struct k230_sysclk *ksc = pll->ksc;
>> +
>> + guard(spinlock)(&ksc->pll_lock);
>> + k230_pll_enable_hw(ksc->regs, pll);
>> +
>> + return 0;
>> +}
>> +
>> +static void k230_pll_disable(struct clk_hw *hw)
>> +{
>> + struct k230_pll *pll = to_k230_pll(hw);
>> + struct k230_sysclk *ksc = pll->ksc;
>> + u32 reg;
>> +
>> + guard(spinlock)(&ksc->pll_lock);
>> + reg = readl(pll->gate);
>> +
>> + reg &= ~(K230_PLL_GATE_ENABLE);
>> + reg |= (K230_PLL_GATE_WRITE_ENABLE);
>> +
>> + writel(reg, pll->gate);
>> +}
>> +
>> +static int k230_pll_is_enabled(struct clk_hw *hw)
>> +{
>> + return k230_pll_hw_is_enabled(to_k230_pll(hw));
>> +}
>> +
>> +static int k230_pll_init(struct clk_hw *hw)
>> +{
>> + if (k230_pll_is_enabled(hw))
>> + return clk_prepare_enable(hw->clk);
> Is this CLK_IS_CRITICAL?
I think it is not the case of CLK_IS_CRITICAL; it enables the software
if the hardware is automatically enabled.
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned long k230_pll_get_rate(struct clk_hw *hw, unsigned long parent_rate)
>> +{
>> + struct k230_pll *pll = to_k230_pll(hw);
>> + struct k230_sysclk *ksc = pll->ksc;
>> + u32 reg;
>> + u32 r, f, od;
>> +
>> + reg = readl(pll->bypass);
>> + if (reg & K230_PLL_BYPASS_ENABLE)
>> + return parent_rate;
>> +
>> + reg = readl(pll->lock);
>> + if (!(reg & (K230_PLL_STATUS_MASK))) { /* unlocked */
>> + dev_err(&ksc->pdev->dev, "%s is unlock.\n", clk_hw_get_name(hw));
>> + return 0;
>> + }
>> +
>> + reg = readl(pll->div);
>> + r = ((reg >> K230_PLL_R_SHIFT) & K230_PLL_R_MASK) + 1;
>> + f = ((reg >> K230_PLL_F_SHIFT) & K230_PLL_F_MASK) + 1;
>> + od = ((reg >> K230_PLL_OD_SHIFT) & K230_PLL_OD_MASK) + 1;
>> +
>> + return div_u64((u64)parent_rate * f, r * od);
> Is this mul_u64_u32_div()?
Thanks for reminders.
It can be replaced with `mul_u64_u32_div(parent_rate, f, r * od)`
>> +}
>> +
>> +static const struct clk_ops k230_pll_ops = {
>> + .init = k230_pll_init,
>> + .prepare = k230_pll_prepare,
>> + .enable = k230_pll_enable,
>> + .disable = k230_pll_disable,
>> + .is_enabled = k230_pll_is_enabled,
>> + .recalc_rate = k230_pll_get_rate,
>> +};
>> +
>> +static int k230_register_pll(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + enum k230_pll_id pll_id,
>> + const char *name,
>> + int num_parents,
>> + const struct clk_ops *ops)
>> +{
>> + struct k230_pll *pll = &ksc->plls[pll_id];
>> + struct clk_init_data init = {};
>> + struct device *dev = &pdev->dev;
>> + int ret;
>> + const struct clk_parent_data parent_data[] = {
>> + { .index = 0, },
>> + };
>> +
>> + init.name = name;
>> + init.parent_data = parent_data;
>> + init.num_parents = num_parents;
>> + init.ops = ops;
>> +
>> + pll->hw.init = &init;
>> + pll->ksc = ksc;
>> +
>> + ret = devm_clk_hw_register(dev, &pll->hw);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "failed to register pll");
> Missing newline on printk.
OK, I get it.
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_register_plls(struct platform_device *pdev, struct k230_sysclk *ksc)
>> +{
>> + int i, ret;
>> + const struct k230_pll_cfg *cfg;
>> +
>> + for (i = 0; i < K230_PLL_NUM; i++) {
>> + cfg = &k230_pll_cfgs[i];
>> +
>> + k230_init_pll(ksc->pll_regs, i, &ksc->plls[i]);
>> +
>> + ret = k230_register_pll(pdev, ksc, cfg->pll_id, cfg->name, 1,
>> + &k230_pll_ops);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret,
>> + "register %s failed\n", cfg->name);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_register_pll_divs(struct platform_device *pdev, struct k230_sysclk *ksc)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct clk_hw *hw;
>> +
>> + for (int i = 0; i < K230_PLL_DIV_NUM; i++) {
>> + hw = devm_clk_hw_register_fixed_factor(dev, k230_pll_div_cfgs[i].name,
>> + k230_pll_div_cfgs[i].parent_name,
>> + 0, 1, k230_pll_div_cfgs[i].div);
>> + if (IS_ERR(hw))
>> + return PTR_ERR(hw);
>> + ksc->dclks[i].hw = hw;
>> + ksc->dclks[i].ksc = ksc;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_clk_enable(struct clk_hw *hw)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u32 reg;
>> +
>> + if (!cfg->have_gate)
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have gate\n");
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + reg = readl(cfg->gate_reg);
>> + if (cfg->gate_bit_reverse)
>> + reg &= ~BIT(cfg->gate_bit_enable);
>> + else
>> + reg |= BIT(cfg->gate_bit_enable);
>> + writel(reg, cfg->gate_reg);
>> +
>> + return 0;
>> +}
>> +
>> +static void k230_clk_disable(struct clk_hw *hw)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u32 reg;
>> +
>> + if (!cfg->have_gate) {
>> + dev_err(&ksc->pdev->dev, "This clock doesn't have gate\n");
> Why are the clk_ops assigned to this clk then?
If this clock doesn't have a gate, then the clk_ops will not be assigned to it. In this case, I'm simply checking it again. You can verify this in the k230_register_clk function to ensure it's handled correctly.
If you think this check is redundant, I can drop it.
>> + return;
>> + }
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + reg = readl(cfg->gate_reg);
>> +
>> + if (cfg->gate_bit_reverse)
>> + reg |= BIT(cfg->gate_bit_enable);
>> + else
>> + reg &= ~BIT(cfg->gate_bit_enable);
>> +
>> + writel(reg, cfg->gate_reg);
>> +}
>> +
>> +static int k230_clk_is_enabled(struct clk_hw *hw)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u32 reg;
>> +
>> + if (!cfg->have_gate)
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have gate\n");
> Why are the clk_ops assigned to this clk then?
ditto.
> Don't use
> dev_err_probe() here.
OK, I'll modify it.
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + reg = readl(cfg->gate_reg);
>> +
>> + /* Check gate bit condition based on configuration and then set ret */
>> + if (cfg->gate_bit_reverse)
>> + return (BIT(cfg->gate_bit_enable) & reg) ? 1 : 0;
>> + else
>> + return (BIT(cfg->gate_bit_enable) & ~reg) ? 1 : 0;
>> +}
>> +
>> +static int k230_clk_set_parent(struct clk_hw *hw, u8 index)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u8 reg;
>> +
>> + if (!cfg->have_mux)
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have mux\n");
> Why are the clk_ops assigned to this clk then?
ditto.
> Don't use
> dev_err_probe() here.
OK. I'll modify it.
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + reg = (cfg->mux_reg_mask & index) << cfg->mux_reg_shift;
>> + writeb(reg, cfg->mux_reg);
>> +
>> + return 0;
>> +}
>> +
>> +static u8 k230_clk_get_parent(struct clk_hw *hw)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u8 reg;
>> +
>> + if (!cfg->have_mux)
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have mux\n");
> All these checks should go away and we should have different clk_ops for
> different clk types.
OK, I'll remove these redundant check.
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + reg = readb(cfg->mux_reg);
>> +
>> + return reg;
>> +}
>> +
>> +static unsigned long k230_clk_get_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u32 mul, div;
>> +
>> + if (!cfg->have_rate) /* no divider, return parents' clk */
>> + return parent_rate;
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + switch (cfg->method) {
>> + /*
>> + * K230_MUL: div_mask+1/div_max...
>> + * K230_DIV: mul_max/div_mask+1
>> + * K230_MUL_DIV: mul_mask/div_mask...
>> + */
>> + case K230_MUL:
>> + div = cfg->rate_div_max;
>> + mul = (readl(cfg->rate_reg) >> cfg->rate_div_shift)
>> + & cfg->rate_div_mask;
>> + mul++;
>> + break;
>> + case K230_DIV:
>> + mul = cfg->rate_mul_max;
>> + div = (readl(cfg->rate_reg) >> cfg->rate_div_shift)
>> + & cfg->rate_div_mask;
>> + div++;
>> + break;
>> + case K230_MUL_DIV:
>> + if (!cfg->have_rate_c) {
>> + mul = (readl(cfg->rate_reg) >> cfg->rate_mul_shift)
>> + & cfg->rate_mul_mask;
>> + div = (readl(cfg->rate_reg) >> cfg->rate_div_shift)
>> + & cfg->rate_div_mask;
>> + } else {
>> + mul = (readl(cfg->rate_reg_c) >> cfg->rate_mul_shift_c)
>> + & cfg->rate_mul_mask_c;
>> + div = (readl(cfg->rate_reg_c) >> cfg->rate_div_shift)
>> + & cfg->rate_div_mask;
>> + }
>> + break;
>> + default:
>> + return 0;
>> + }
>> +
>> + return div_u64((u64)parent_rate * mul, div);
>> +}
>> +
>> +static int k230_clk_find_approximate(struct k230_clk *clk,
>> + u32 mul_min,
>> + u32 mul_max,
>> + u32 div_min,
>> + u32 div_max,
>> + enum k230_clk_div_type method,
>> + unsigned long rate,
>> + unsigned long parent_rate,
>> + u32 *div,
>> + u32 *mul)
>> +{
>> + long abs_min;
>> + long abs_current;
>> + long perfect_divide;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> +
>> + const u32 codec_clk[9] = {
>> + 2048000,
>> + 3072000,
>> + 4096000,
>> + 6144000,
>> + 8192000,
>> + 11289600,
>> + 12288000,
>> + 24576000,
>> + 49152000
>> + };
>> +
>> + const u32 codec_div[9][2] = {
>> + {3125, 16},
>> + {3125, 24},
>> + {3125, 32},
>> + {3125, 48},
>> + {3125, 64},
>> + {15625, 441},
>> + {3125, 96},
>> + {3125, 192},
>> + {3125, 384}
>> + };
>> +
>> + const u32 pdm_clk[20] = {
>> + 128000,
>> + 192000,
>> + 256000,
>> + 384000,
>> + 512000,
>> + 768000,
>> + 1024000,
>> + 1411200,
>> + 1536000,
>> + 2048000,
>> + 2822400,
>> + 3072000,
>> + 4096000,
>> + 5644800,
>> + 6144000,
>> + 8192000,
>> + 11289600,
>> + 12288000,
>> + 24576000,
>> + 49152000
>> + };
>> +
>> + const u32 pdm_div[20][2] = {
>> + {3125, 1},
>> + {6250, 3},
>> + {3125, 2},
>> + {3125, 3},
>> + {3125, 4},
>> + {3125, 6},
>> + {3125, 8},
>> + {125000, 441},
>> + {3125, 12},
>> + {3125, 16},
>> + {62500, 441},
>> + {3125, 24},
>> + {3125, 32},
>> + {31250, 441},
>> + {3125, 48},
>> + {3125, 64},
>> + {15625, 441},
>> + {3125, 96},
>> + {3125, 192},
>> + {3125, 384}
>> + };
>> +
>> + switch (method) {
>> + /* only mul can be changeable 1/12,2/12,3/12...*/
>> + case K230_MUL:
>> + perfect_divide = (long)((parent_rate * 1000) / rate);
>> + abs_min = abs(perfect_divide -
>> + (long)(((long)div_max * 1000) / (long)mul_min));
>> + *mul = mul_min;
>> +
>> + for (u32 i = mul_min + 1; i <= mul_max; i++) {
>> + abs_current = abs(perfect_divide -
>> + (long)((long)((long)div_max * 1000) / (long)i));
>> + if (abs_min > abs_current) {
>> + abs_min = abs_current;
>> + *mul = i;
>> + }
>> + }
>> +
>> + *div = div_max;
>> + break;
>> + /* only div can be changeable, 1/1,1/2,1/3...*/
>> + case K230_DIV:
>> + perfect_divide = (long)((parent_rate * 1000) / rate);
>> + abs_min = abs(perfect_divide -
>> + (long)(((long)div_min * 1000) / (long)mul_max));
>> + *div = div_min;
>> +
>> + for (u32 i = div_min + 1; i <= div_max; i++) {
>> + abs_current = abs(perfect_divide -
>> + (long)((long)((long)i * 1000) / (long)mul_max));
>> + if (abs_min > abs_current) {
>> + abs_min = abs_current;
>> + *div = i;
>> + }
>> + }
>> +
>> + *mul = mul_max;
>> + break;
>> + /* mul and div can be changeable. */
>> + case K230_MUL_DIV:
>> + if (cfg->rate_reg_off == K230_CLK_CODEC_ADC_MCLKDIV_OFFSET ||
>> + cfg->rate_reg_off == K230_CLK_CODEC_DAC_MCLKDIV_OFFSET) {
>> + for (u32 j = 0; j < 9; j++) {
>> + if (0 == (rate - codec_clk[j])) {
>> + *div = codec_div[j][0];
>> + *mul = codec_div[j][1];
>> + }
>> + }
>> + } else if (cfg->rate_reg_off == K230_CLK_AUDIO_CLKDIV_OFFSET ||
>> + cfg->rate_reg_off == K230_CLK_PDM_CLKDIV_OFFSET) {
>> + for (u32 j = 0; j < 20; j++) {
>> + if (0 == (rate - pdm_clk[j])) {
>> + *div = pdm_div[j][0];
>> + *mul = pdm_div[j][1];
>> + }
>> + }
>> + } else {
>> + return -EINVAL;
>> + }
>> + break;
>> + default:
>> + WARN_ON_ONCE(true);
>> + return -EPERM;
> This is impossible? Remove the default case and the compiler will warn
> if an enum case is missing.
Thanks for reminders. I get it.
>> + }
>> + return 0;
>> +}
>> +
>> +static long k230_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u32 div = 0, mul = 0;
>> +
>> + if (k230_clk_find_approximate(clk,
>> + cfg->rate_mul_min, cfg->rate_mul_max,
>> + cfg->rate_div_min, cfg->rate_div_max,
>> + cfg->method, rate, *parent_rate, &div, &mul)) {
>> + dev_err(&ksc->pdev->dev,
>> + "[%s]: clk %s round rate error!\n",
>> + __func__,
>> + clk_hw_get_name(hw));
>> + return 0;
> Why isn't an error returned?
k230_clk_round_rate is indeed a callback function in clk_ops.
According to the documentation, the return value of this function should
be the final clock rate, not an error code[1].
This means that even when an error occurs, the function needs to return
a valid rate, rather than directly returning an error code.
Link:
https://elixir.bootlin.com/linux/v6.12.15/source/include/linux/clk-provider.h#L139
[1]
>> + }
>> +
>> + return div_u64((u64)(*parent_rate) * mul, div);
>> +}
>> +
>> +static int k230_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + struct k230_clk *clk = to_k230_clk(hw);
>> + struct k230_sysclk *ksc = clk->ksc;
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
>> + u32 div = 0, mul = 0, reg = 0, reg_c;
>> +
>> + if (!cfg->have_rate || !cfg->rate_reg)
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock may have no rate\n");
>> +
>> + if (rate > parent_rate || rate == 0 || parent_rate == 0)
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "rate or parent_rate error\n");
>> +
>> + if (cfg->read_only)
>> + return dev_err_probe(&ksc->pdev->dev, -EPERM, "This clk rate is read only\n");
>> +
>> + if (k230_clk_find_approximate(clk,
>> + cfg->rate_mul_min, cfg->rate_mul_max,
>> + cfg->rate_div_min, cfg->rate_div_max,
>> + cfg->method, rate, parent_rate, &div, &mul))
>> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "[%s]: clk %s set rate error!\n",
>> + __func__, clk_hw_get_name(hw));
>> +
>> + guard(spinlock)(&ksc->clk_lock);
>> + if (!cfg->have_rate_c) {
>> + reg = readl(cfg->rate_reg);
>> + reg &= ~((cfg->rate_div_mask) << (cfg->rate_div_shift));
>> +
>> + if (cfg->method == K230_DIV) {
>> + reg &= ~((cfg->rate_mul_mask) << (cfg->rate_mul_shift));
>> + reg |= ((div - 1) & cfg->rate_div_mask) << (cfg->rate_div_shift);
>> + } else if (cfg->method == K230_MUL) {
>> + reg |= ((mul - 1) & cfg->rate_div_mask) << (cfg->rate_div_shift);
>> + } else {
>> + reg |= (mul & cfg->rate_mul_mask) << (cfg->rate_mul_shift);
>> + reg |= (div & cfg->rate_div_mask) << (cfg->rate_div_shift);
>> + }
>> + reg |= BIT(cfg->rate_write_enable_bit);
>> + } else {
>> + reg = readl(cfg->rate_reg);
>> + reg_c = readl(cfg->rate_reg_c);
>> + reg &= ~((cfg->rate_div_mask) << (cfg->rate_div_shift));
>> + reg_c &= ~((cfg->rate_mul_mask_c) << (cfg->rate_mul_shift_c));
>> + reg_c |= BIT(cfg->rate_write_enable_bit_c);
>> +
>> + reg_c |= (mul & cfg->rate_mul_mask_c) << (cfg->rate_mul_shift_c);
>> + reg |= (div & cfg->rate_div_mask) << (cfg->rate_div_shift);
>> +
>> + writel(reg_c, cfg->rate_reg_c);
>> + }
>> + writel(reg, cfg->rate_reg);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct clk_ops k230_clk_ops_arr[K230_CLK_OPS_ID_NUM] = {
>> + [K230_CLK_OPS_ID_NONE] = {
>> + /* Sentinel */
>> + },
>> + [K230_CLK_OPS_ID_GATE_ONLY] = {
>> + K230_CLK_OPS_GATE,
>> + },
>> + [K230_CLK_OPS_ID_RATE_ONLY] = {
>> + K230_CLK_OPS_RATE,
>> + },
>> + [K230_CLK_OPS_ID_RATE_GATE] = {
>> + K230_CLK_OPS_RATE,
>> + K230_CLK_OPS_GATE,
>> + },
>> + [K230_CLK_OPS_ID_MUX_ONLY] = {
>> + K230_CLK_OPS_MUX,
>> + },
>> + [K230_CLK_OPS_ID_MUX_GATE] = {
>> + K230_CLK_OPS_MUX,
>> + K230_CLK_OPS_GATE,
>> + },
>> + [K230_CLK_OPS_ID_MUX_RATE] = {
>> + K230_CLK_OPS_MUX,
>> + K230_CLK_OPS_RATE,
>> + },
>> + [K230_CLK_OPS_ID_ALL] = {
>> + K230_CLK_OPS_MUX,
>> + K230_CLK_OPS_RATE,
>> + K230_CLK_OPS_GATE,
>> + },
>> +};
>> +
>> +static int k230_register_clk(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + int id,
>> + const struct clk_parent_data *parent_data,
>> + u8 num_parents,
>> + unsigned long flags)
>> +{
>> + struct k230_clk *clk = &ksc->clks[id];
>> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[id];
>> + struct clk_init_data init = {};
>> + int clk_id = 0;
>> + int ret;
>> +
>> + if (cfg->have_rate) {
>> + cfg->rate_reg = (ksc->regs + cfg->rate_reg_off);
> Drop useless parenthesis please.
OK, I'll drop it.
>> + clk_id += K230_CLK_OPS_ID_RATE_ONLY;
>> + }
>> +
>> + if (cfg->have_mux) {
>> + cfg->mux_reg = (ksc->regs + cfg->mux_reg_off);
>> + clk_id += K230_CLK_OPS_ID_MUX_ONLY;
>> +
>> + /* mux clock doesn't match the case that num_parents less than 2 */
>> + if (num_parents < 2)
>> + return -EINVAL;
>> + }
>> +
>> + if (cfg->have_gate) {
>> + cfg->gate_reg = (ksc->regs + cfg->gate_reg_off);
> Drop useless parenthesis please.
OK, I'll drop it.
>> + clk_id += K230_CLK_OPS_ID_GATE_ONLY;
>> + }
>> +
>> + if (cfg->have_rate_c)
>> + cfg->rate_reg_c = (ksc->regs + cfg->rate_reg_off_c);
> Drop useless parenthesis please.
OK, I'll drop it.
>> +
>> + init.name = k230_clk_cfgs[id].name;
>> + init.flags = flags;
>> + init.parent_data = parent_data;
>> + init.num_parents = num_parents;
>> + init.ops = &k230_clk_ops_arr[clk_id];
>> +
>> + clk->id = id;
>> + clk->ksc = ksc;
>> + clk->hw.init = &init;
>> +
>> + ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev,
>> + ret,
>> + "register clock %s failed\n",
>> + k230_clk_cfgs[id].name);
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_register_mux_clk(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + struct clk_parent_data *parent_data,
>> + int num_parent,
>> + int id)
>> +{
>> + return k230_register_clk(pdev, ksc, id,
>> + (const struct clk_parent_data *)parent_data,
> Please remove useless cast.
OK, I'll drop it.
>> + num_parent, 0);
>> +}
>> +
>> +static int k230_register_osc24m_child(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + int id)
>> +{
>> + const struct clk_parent_data parent_data = {
>> + .index = 0,
>> + };
>> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, 0);
>> +}
>> +
>> +static int k230_register_pll_child(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + int id,
>> + enum k230_pll_id pll_id,
>> + unsigned long flags)
>> +{
>> + const struct clk_parent_data parent_data = {
>> + .hw = &ksc->plls[pll_id].hw,
>> + };
>> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, flags);
>> +}
>> +
>> +static int k230_register_pll_div_child(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + int id,
>> + enum k230_pll_div_id pll_div_id,
>> + unsigned long flags)
>> +{
>> + const struct clk_parent_data parent_data = {
>> + .hw = ksc->dclks[pll_div_id].hw,
>> + };
>> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, flags);
>> +}
>> +
>> +static int k230_register_clk_child(struct platform_device *pdev,
>> + struct k230_sysclk *ksc,
>> + int id,
>> + int parent_id)
>> +{
>> + const struct clk_parent_data parent_data = {
>> + .hw = &ksc->clks[parent_id].hw,
>> + };
>> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, 0);
>> +}
>> +
>> +static int _k230_clk_mux_get_parent_data(struct k230_sysclk *ksc,
>> + struct k230_clk_parent *pclk,
>> + struct clk_parent_data *parent_data)
>> +{
>> + switch (pclk->type) {
>> + case K230_OSC24M:
>> + parent_data->index = 0;
>> + break;
>> + case K230_PLL:
>> + parent_data->hw = &ksc->plls[pclk->pll_id].hw;
>> + break;
>> + case K230_PLL_DIV:
>> + parent_data->hw = ksc->dclks[pclk->pll_div_id].hw;
>> + break;
>> + case K230_CLK_COMPOSITE:
>> + parent_data->hw = &ksc->clks[pclk->clk_id].hw;
>> + break;
>> + default:
>> + WARN_ON_ONCE(true);
>> + return -EPERM;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_clk_mux_get_parent_data(struct k230_sysclk *ksc,
>> + struct k230_clk_cfg *cfg,
>> + struct clk_parent_data *parent_data,
>> + int num_parent)
>> +{
>> + int ret;
>> + struct k230_clk_parent *pclk = cfg->parent;
>> +
>> + for (int i = 0; i < num_parent; i++) {
>> + ret = _k230_clk_mux_get_parent_data(ksc, &pclk[i], &parent_data[i]);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_register_clks(struct platform_device *pdev, struct k230_sysclk *ksc)
>> +{
>> + struct k230_clk_cfg *cfg;
>> + struct k230_clk_parent *pclk;
>> + struct clk_parent_data parent_data[K230_CLK_MAX_PARENT_NUM];
>> + int ret, i;
>> +
>> + /*
>> + * Single parent clock:
>> + * pll0_div2 sons: cpu0_src
>> + * pll0_div4 sons: cpu0_pclk
>> + * cpu0_src sons: cpu0_aclk, cpu0_plic, cpu0_noc_ddrcp4, pmu_pclk
>> + *
>> + * Mux clock:
>> + * hs_ospi_src parents: pll0_div2, pll2_div4
>> + */
>> + for (i = 0; i < K230_CLK_NUM; i++) {
>> + cfg = &k230_clk_cfgs[i];
>> + if (!cfg->status)
>> + continue;
>> +
>> + if (cfg->have_mux) {
>> + ret = k230_clk_mux_get_parent_data(ksc, cfg, parent_data,
>> + cfg->num_parent);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret,
>> + "Failed to get parent data\n");
>> +
>> + ret = k230_register_mux_clk(pdev, ksc, parent_data,
>> + cfg->num_parent, i);
>> + } else {
>> + pclk = cfg->parent;
>> + switch (pclk->type) {
>> + case K230_OSC24M:
>> + ret = k230_register_osc24m_child(pdev, ksc, i);
>> + break;
>> + case K230_PLL:
>> + ret = k230_register_pll_child(pdev, ksc, i,
>> + pclk->pll_id, cfg->flags);
>> + break;
>> + case K230_PLL_DIV:
>> + ret = k230_register_pll_div_child(pdev, ksc, i,
>> + pclk->pll_div_id, cfg->flags);
>> + break;
>> + case K230_CLK_COMPOSITE:
>> + ret = k230_register_clk_child(pdev, ksc, i,
>> + pclk->clk_id);
>> + break;
>> + default:
>> + return dev_err_probe(&pdev->dev, -EINVAL, "Invalid type\n");
>> + }
>> + }
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "register child id %d failed\n", i);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct clk_hw *k230_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data)
>> +{
>> + struct k230_sysclk *ksc;
>> + unsigned int idx;
>> +
>> + if (clkspec->args_count != 1)
>> + return ERR_PTR(-EINVAL);
>> +
>> + idx = clkspec->args[0];
>> + if (idx >= K230_CLK_NUM)
>> + return ERR_PTR(-EINVAL);
>> +
>> + if (!data)
>> + return ERR_PTR(-EINVAL);
>> +
>> + ksc = (struct k230_sysclk *)data;
> Drop useless cast please.
OK, I'll drop it.
>> +
>> + return &ksc->clks[idx].hw;
>> +}
>> +
>> +static int k230_clk_init_plls(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct k230_sysclk *ksc = platform_get_drvdata(pdev);
>> +
>> + spin_lock_init(&ksc->pll_lock);
>> +
>> + ksc->pll_regs = devm_platform_ioremap_resource(pdev, 0);
>> + if (!ksc->pll_regs)
> Does it return an error pointer or NULL on failure?The dev_err_probe()
> below is incorrect or the if condition above is.
Yes，I've checked it and confirmed that the if condition is incorrect [2].
So it should be:
if (IS_ERR(ksc->pll_regs))
Link:
https://elixir.bootlin.com/linux/v6.12.15/source/drivers/base/platform.c#L111
[2]
>
>> + return dev_err_probe(&pdev->dev, PTR_ERR(ksc->pll_regs), "map registers failed\n");
> Doesn't this already print an error?
>
>> +
>> + ret = k230_register_plls(pdev, ksc);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "register plls failed\n");
>> +
>> + ret = k230_register_pll_divs(pdev, ksc);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "register pll_divs failed\n");
>> +
>> + for (int i = 0; i < K230_PLL_DIV_NUM; i++) {
>> + ret = devm_clk_hw_register_clkdev(&pdev->dev, ksc->dclks[i].hw,
>> + k230_pll_div_cfgs[i].name, NULL);
> Why is clkdev being used?
Here is my thought:
clkdev is used to register clock devices internally and associate them
with a specific device identifier (con_id). This allows some certain
clock consumers, can access the clock of PLL_DIVs using `clk_get()` and
related APIs.
In this case, while the PLL_DIVs are internal clocks, which not exposed
in the DT since they are only used within the driver. So I use
`register_clkdev()` to make PLLs clock accessible.
If there is anything I ignored or misunderstand, please feel free to
correct me.
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "clock_lookup create failed\n");
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_clk_init_clks(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct k230_sysclk *ksc = platform_get_drvdata(pdev);
>> +
>> + spin_lock_init(&ksc->clk_lock);
>> +
>> + ksc->regs = devm_platform_ioremap_resource(pdev, 1);
>> + if (!ksc->regs)
>> + return dev_err_probe(&pdev->dev, PTR_ERR(ksc->regs), "failed to map registers\n");
>> +
>> + ret = k230_register_clks(pdev, ksc);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "register clock provider failed\n");
>> +
>> + ret = devm_of_clk_add_hw_provider(&pdev->dev, k230_clk_hw_onecell_get, ksc);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "add clock provider failed\n");
>> +
>> + return 0;
>> +}
>> +
>> +static int k230_clk_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct k230_sysclk *ksc;
>> +
>> + ksc = devm_kzalloc(&pdev->dev, sizeof(struct k230_sysclk), GFP_KERNEL);
>> + if (!ksc)
>> + return -ENOMEM;
>> +
>> + ksc->plls = devm_kmalloc_array(&pdev->dev, K230_PLL_NUM,
> Any reason devm_kcalloc() isn't used?
Thanks for your reminder, I'll replace devm_kmalloc_array() with
devm_kcalloc() instead.
>> + sizeof(struct k230_pll), GFP_KERNEL);
>> + if (!ksc->plls)
>> + return -ENOMEM;
>> +
>> + ksc->dclks = devm_kmalloc_array(&pdev->dev, K230_PLL_DIV_NUM,
>> + sizeof(struct k230_pll_div), GFP_KERNEL);
>> + if (!ksc->dclks)
>> + return -ENOMEM;
>> +
>> + ksc->clks = devm_kmalloc_array(&pdev->dev, K230_CLK_NUM,
>> + sizeof(struct k230_clk), GFP_KERNEL);
>> + if (!ksc->clks)
>> + return -ENOMEM;
>> +
>> + ksc->pdev = pdev;
>> + platform_set_drvdata(pdev, ksc);
>> +
>> + ret = k230_clk_init_plls(pdev);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "init plls failed\n");
>> +
>> + ret = k230_clk_init_clks(pdev);
>> + if (ret)
>> + return dev_err_probe(&pdev->dev, ret, "init clks failed\n");
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id k230_clk_ids[] = {
>> + { .compatible = "canaan,k230-clk" },
>> + { /* Sentinel */ },
> Nitpick: Please drop last comma so that nothing can come after without
> causing a compilation error.
OK, I get it. Thanks for your reminder.
>> +};
>> +MODULE_DEVICE_TABLE(of, k230_clk_ids);
Thanks for your patient review!
Powered by blists - more mailing lists