[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20250220170511.719a1cac@wsk>
Date: Thu, 20 Feb 2025 17:05:11 +0100
From: Lukasz Majewski <lukma@...x.de>
To: Andrew Lunn <andrew@...n.ch>
Cc: Abel Vesa <abelvesa@...nel.org>, Peng Fan <peng.fan@....com>, Michael
Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>, Shawn
Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam
<festevam@...il.com>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
linux-clk@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH] arm: clk: Add ETH switch clock description for vf610
SoC
Hi Andrew,
> > > Seems like a reasonable compromise. You would only load this
> > > driver if you intend to make use of the switch...
> >
> > Yes, the main use case would be the switch (after bridge ... command
> > called).
> >
> > However, until then we shall? have port separation.
>
> Yes. The model Linux uses is that the ports are individual interfaces
> to start with. We should keep to that model.
+1
>
> > > MoreThanIP is now part of Synopsys. I wounder if this IP now
> > > exists in other SoCs? The press release however suggests Synopsys
> > > was interesting in the high speed interfaces, not a two ports Fast
> > > Ethernet switch.
> >
> > I would need some detailed documentation....
>
> Which is probably not available. You might be able to get some clues
> from the Freescale datasheets, if they have kept the address spaces
> separated. I don't see it as a strong requirement, given how old this
> IP is, and the limited interest in supporting it over the years, My
> guess is, nobody else uses it.
:-)
>
> Andrew
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists