linux-kernel - Re: [PATCH 1/2] dt-bindings: gpio: nxp,pcf8575: add reset GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1797373.X513TT2pbd@diego>
Date: Thu, 20 Feb 2025 22:51:26 +0100
From: Heiko Stübner <heiko@...ech.de>
To: Linus Walleij <linus.walleij@...aro.org>,
 Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
 Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
 Quentin Schulz <foss+kernel@...il.net>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, Quentin Schulz <quentin.schulz@...rry.de>
Subject: Re: [PATCH 1/2] dt-bindings: gpio: nxp,pcf8575: add reset GPIO

Am Donnerstag, 20. Februar 2025, 10:56:51 MEZ schrieb Quentin Schulz:
> From: Quentin Schulz <quentin.schulz@...rry.de>
> 
> A few of the I2C GPIO expander chips supported by this binding have a
> RESETN pin to be able to reset the chip. The chip is held in reset while
> the pin is low, therefore the polarity of reset-gpios is expected to
> reflect that, i.e. a GPIO_ACTIVE_HIGH means the GPIO will be held low
> for reset and released high, GPIO_ACTIVE_LOW means the GPIO will be held
> high for reset and released low.
> 
> Out of the supported chips, only PCA9670, PCA9671, PCA9672 and PCA9673
> show a RESETN pin in their datasheets. They all share the same reset
> timings, that is 4+us reset pulse[0] and 100+us reset time[0].
> 
> When performing a reset, "The PCA9670 registers and I2C-bus state
> machine will be held in their default state until the RESET input is
> once again HIGH."[1] meaning we now know the state of each line
> controlled by the GPIO expander. Therefore, setting lines-initial-states
> and reset-gpios both does not make sense and their presence is XOR'ed.
> 
> [0] https://www.nxp.com/docs/en/data-sheet/PCA9670.pdf Fig 22.
> [1] https://www.nxp.com/docs/en/data-sheet/PCA9670.pdf 8.5
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@...rry.de>
> ---
>  .../devicetree/bindings/gpio/nxp,pcf8575.yaml      | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
> index 3718103e966a13e1d77f73335ff73c18a3199469..d08d3f848f82e74de949da16d26a810dc52a74e5 100644
> --- a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
> +++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
[...]
> +  # lines-initial-states XOR reset-gpios
> +  # Performing a reset reinitializes all lines to a known state which
> +  # may not match passed lines-initial-states
> +  - if:
> +      required:
> +        - lines-initial-states
> +    then:
> +      properties:
> +        reset-gpios: false
> +

exclusion logic
Tested-by: Heiko Stuebner <heiko@...ech.de>

dtbscheck is happy when either reset-gpios or lines-initial-states is
present, but when both are present complains like

    rk3588-tiger-haikou-video-demo.dtb: gpio@27: reset-gpios: False schema does not allow [[205, 17, 1]]

as expected.