[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250221-sar2130p-pci-v3-2-61a0fdfb75b4@linaro.org>
Date: Fri, 21 Feb 2025 17:52:00 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Mrinmay Sarkar <quic_msarkar@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: Krzysztof Wilczyński <kwilczynski@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 2/8] dt-bindings: PCI: qcom-ep: describe optional IOMMU
Some of Qualcomm platforms have an IOMMU unit between the PCIe IP and
DDR. For example, SA8775P specifies the iommu alththough it is not a
part of bindings. Change the schema in order to require the IOMMU for
SA8775P and forbid it from being used on SDX55 (SM8450 will be handled
in a later patch).
This fixes the following warning:
pcie-ep@...0000: Unevaluated properties are not allowed ('iommus' was unexpected)
Fixes: 9d3d5e75f31c ("dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 0c2ca4cfa3b190b3fb204f0d7142370734fb3534..6075361348352bb8d607acecc76189e28b03dc5b 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -75,6 +75,9 @@ properties:
- const: doorbell
- const: dma
+ iommus:
+ maxItems: 1
+
reset-gpios:
description: GPIO used as PERST# input signal
maxItems: 1
@@ -162,6 +165,7 @@ allOf:
maxItems: 2
interrupt-names:
maxItems: 2
+ iommus: false
- if:
properties:
@@ -234,6 +238,8 @@ allOf:
interrupt-names:
minItems: 3
maxItems: 3
+ required:
+ - iommus
unevaluatedProperties: false
--
2.39.5
Powered by blists - more mailing lists