[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <D7YD5C0HCSZ1.2DOE3TAA7024Y@linaro.org>
Date: Fri, 21 Feb 2025 19:16:29 +0000
From: "Alexey Klimov" <alexey.klimov@...aro.org>
To: "Janaki Ramaiah Thota" <quic_janathot@...cinc.com>, "Bjorn Andersson"
<andersson@...nel.org>, "Konrad Dybcio" <konradybcio@...nel.org>, "Rob
Herring" <robh@...nel.org>, "Krzysztof Kozlowski" <krzk+dt@...nel.org>,
"Conor Dooley" <conor+dt@...nel.org>
Cc: <quic_mohamull@...cinc.com>, <quic_hbandi@...cinc.com>,
<quic_anubhavg@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v10 1/1] arm64: dts: qcom: qcs6490-rb3gen: add and
enable BT node
On Fri Feb 21, 2025 at 5:10 PM GMT, Janaki Ramaiah Thota wrote:
> Add the PMU node for WCN6750 present on the qcs6490-rb3gen
Is it rb3gen or rb3gen2? Also in the subject.
The file that you patch seems to be "rb3gen2".
> board and assign its power outputs to the Bluetooth module.
>
> In WCN6750 module sw_ctrl and wifi-enable pins are handled
> in the wifi controller firmware. Therefore, it is not required
> to have those pins' entries in the PMU node.
>
> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 171 ++++++++++++++++++-
> 1 file changed, 170 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 7a36c90ad4ec..de03770e0b90 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
[..]
Best regards,
Alexey
Powered by blists - more mailing lists