[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3s36j75eoqszm5hiftia543h2a6nxaa74wubrr6nq4akzq4hta@wyuwa5onjauz>
Date: Sat, 22 Feb 2025 03:06:53 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Marcel Holtmann <marcel@...tmann.org>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Balakrishna Godavarthi <quic_bgodavar@...cinc.com>, Rocky Liao <quic_rjliao@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-bluetooth@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: Re: [PATCH v4 0/6] Bluetooth: qca: add Qualcomm WCN3950 BT/WiFi chip
support
On Fri, Feb 07, 2025 at 10:41:14PM +0200, Dmitry Baryshkov wrote:
> Qualcomm Robotics RB1 platform uses a new member of the WCN39xx family
> of BT/WiFi chips. Add support for this member of the family and enable
> it to be used on the RB1 board.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> ---
> Changes in v4:
> - Added empty line before status property (Konrad)
> - Reword Bluetooth commit message to follow linux-firmware changes
> (cmnv13t.bin and cmnv13s.bin were merged).
> - Link to v3: https://lore.kernel.org/r/20250202-rb1-bt-v3-0-6797a4467ced@linaro.org
>
> Changes in v3:
> - Mention new firmware files.
> - Link to v2: https://lore.kernel.org/r/20250201-rb1-bt-v2-0-fd44011749bb@linaro.org
>
> Changes in v2:
> - Corrected QUP interconnects (Konrad)
> - Added /delete-property/ interrupts and an empty line before status
> (Konrad)
> - Enabled downloading of different NVMs as required for v1.3 of the chip.
> - Link to v1: https://lore.kernel.org/r/20250201-rb1-bt-v1-0-ae896c4923d8@linaro.org
>
> ---
> Dmitry Baryshkov (6):
> dt-bindings: net: bluetooth: qualcomm: document WCN3950
> Bluetooth: qca: simplify WCN399x NVM loading
> Bluetooth: qca: add WCN3950 support
Gracious ping, these patches have been sent two weeks ago.
> arm64: dts: qcom: qcm2290: fix (some) of QUP interconnects
> arm64: dts: qcom: qcm2290: add UART3 device
> arm64: dts: qcom: qrb2210-rb1: add Bluetooth support
>
> .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 +
> arch/arm64/boot/dts/qcom/qcm2290.dtsi | 31 +++++---
> arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 83 ++++++++++++++++++++++
> drivers/bluetooth/btqca.c | 27 +++++--
> drivers/bluetooth/btqca.h | 4 ++
> drivers/bluetooth/hci_qca.c | 25 +++++++
> 6 files changed, 157 insertions(+), 15 deletions(-)
> ---
> base-commit: a1d1e1f2fae5fcb5f2e43b81afa9596c606e683d
> change-id: 20250201-rb1-bt-cec7a314991d
>
> Best regards,
> --
> Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists