[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <174018983078.2766225.824985516904203702.stgit@mhiramat.tok.corp.google.com>
Date: Sat, 22 Feb 2025 11:03:51 +0900
From: "Masami Hiramatsu (Google)" <mhiramat@...nel.org>
To: Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...hat.com>,
Will Deacon <will@...nel.org>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: Boqun Feng <boqun.feng@...il.com>,
Waiman Long <longman@...hat.com>,
Joel Granados <joel.granados@...nel.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
Anna Schumaker <anna.schumaker@...cle.com>,
Lance Yang <ioworker0@...il.com>,
Kent Overstreet <kent.overstreet@...ux.dev>,
Yongliang Gao <leonylgao@...cent.com>,
Steven Rostedt <rostedt@...dmis.org>,
Tomasz Figa <tfiga@...omium.org>,
Sergey Senozhatsky <senozhatsky@...omium.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/2] hung_task: Show the blocker task if the task is hung on mutex
From: Masami Hiramatsu (Google) <mhiramat@...nel.org>
The "hung_task" shows a long-time uninterruptible slept task, but most
often, it's blocked on a mutex acquired by another task. Without
dumping such a task, investigating the root cause of the hung task
problem is very difficult.
This introduce task_struct::blocker_mutex to point the mutex lock
which this task is waiting for. Since the mutex has "owner"
information, we can find the owner task and dump it with hung tasks.
Note: the owner can be changed while dumping the owner task, so
this is "likely" the owner of the mutex.
With this change, the hung task shows blocker task's info like below;
INFO: task cat:115 blocked for more than 122 seconds.
Not tainted 6.14.0-rc3-00003-ga8946be3de00 #156
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:cat state:D stack:13432 pid:115 tgid:115 ppid:106 task_flags:0x400100 flags:0x00000002
Call Trace:
<TASK>
__schedule+0x731/0x960
? schedule_preempt_disabled+0x54/0xa0
schedule+0xb7/0x140
? __mutex_lock+0x51b/0xa60
? __mutex_lock+0x51b/0xa60
schedule_preempt_disabled+0x54/0xa0
__mutex_lock+0x51b/0xa60
read_dummy+0x23/0x70
full_proxy_read+0x6a/0xc0
vfs_read+0xc2/0x340
? __pfx_direct_file_splice_eof+0x10/0x10
? do_sendfile+0x1bd/0x2e0
ksys_read+0x76/0xe0
do_syscall_64+0xe3/0x1c0
? exc_page_fault+0xa9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x4840cd
RSP: 002b:00007ffe99071828 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004840cd
RDX: 0000000000001000 RSI: 00007ffe99071870 RDI: 0000000000000003
RBP: 00007ffe99071870 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000001000000 R11: 0000000000000246 R12: 0000000000001000
R13: 00000000132fd3a0 R14: 0000000000000001 R15: ffffffffffffffff
</TASK>
INFO: task cat:115 is blocked on a mutex likely owned by task cat:114.
task:cat state:S stack:13432 pid:114 tgid:114 ppid:106 task_flags:0x400100 flags:0x00000002
Call Trace:
<TASK>
__schedule+0x731/0x960
? schedule_timeout+0xa8/0x120
schedule+0xb7/0x140
schedule_timeout+0xa8/0x120
? __pfx_process_timeout+0x10/0x10
msleep_interruptible+0x3e/0x60
read_dummy+0x2d/0x70
full_proxy_read+0x6a/0xc0
vfs_read+0xc2/0x340
? __pfx_direct_file_splice_eof+0x10/0x10
? do_sendfile+0x1bd/0x2e0
ksys_read+0x76/0xe0
do_syscall_64+0xe3/0x1c0
? exc_page_fault+0xa9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x4840cd
RSP: 002b:00007ffe3e0147b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004840cd
RDX: 0000000000001000 RSI: 00007ffe3e014800 RDI: 0000000000000003
RBP: 00007ffe3e014800 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000001000000 R11: 0000000000000246 R12: 0000000000001000
R13: 000000001a0a93a0 R14: 0000000000000001 R15: ffffffffffffffff
</TASK>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@...nel.org>
---
Changes in v3:
- Add RCU_LOCKDEP_WARN() to ensure rcu_read_lock() is held.
- Cleanup code to make it fail-fast and add brace to
for_each_process_thread().
- Change the message to "likely owned" instead of "owned".
Changes in v2:
- Introduce CONFIG_DETECT_HUNG_TASK_BLOCKER for this feature.
- Introduce task_struct::blocker_mutex to point the mutex.
- Rename debug_mutex_get_owner() to mutex_get_owner().
- Remove unneeded mutex_waiter::mutex.
---
include/linux/mutex.h | 2 ++
include/linux/sched.h | 4 ++++
kernel/hung_task.c | 36 ++++++++++++++++++++++++++++++++++++
kernel/locking/mutex.c | 14 ++++++++++++++
lib/Kconfig.debug | 10 ++++++++++
5 files changed, 66 insertions(+)
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 2bf91b57591b..2143d05116be 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -202,4 +202,6 @@ DEFINE_GUARD(mutex, struct mutex *, mutex_lock(_T), mutex_unlock(_T))
DEFINE_GUARD_COND(mutex, _try, mutex_trylock(_T))
DEFINE_GUARD_COND(mutex, _intr, mutex_lock_interruptible(_T) == 0)
+extern unsigned long mutex_get_owner(struct mutex *lock);
+
#endif /* __LINUX_MUTEX_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 9632e3318e0d..0cebdd736d44 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1217,6 +1217,10 @@ struct task_struct {
struct mutex_waiter *blocked_on;
#endif
+#ifdef CONFIG_DETECT_HUNG_TASK_BLOCKER
+ struct mutex *blocker_mutex;
+#endif
+
#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
int non_block_count;
#endif
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index 04efa7a6e69b..ccd7217fcec1 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -93,6 +93,41 @@ static struct notifier_block panic_block = {
.notifier_call = hung_task_panic,
};
+
+#ifdef CONFIG_DETECT_HUNG_TASK_BLOCKER
+static void debug_show_blocker(struct task_struct *task)
+{
+ struct task_struct *g, *t;
+ unsigned long owner;
+ struct mutex *lock;
+
+ RCU_LOCKDEP_WARN(!rcu_read_lock_held(), "No rcu lock held");
+
+ lock = READ_ONCE(task->blocker_mutex);
+ if (!lock)
+ return;
+
+ owner = mutex_get_owner(lock);
+ if (unlikely(!owner)) {
+ pr_err("INFO: task %s:%d is blocked on a mutex, but the owner is not found.\n",
+ task->comm, task->pid);
+ return;
+ }
+
+ /* Ensure the owner information is correct. */
+ for_each_process_thread(g, t) {
+ if ((unsigned long)t == owner) {
+ pr_err("INFO: task %s:%d is blocked on a mutex likely owned by task %s:%d.\n",
+ task->comm, task->pid, t->comm, t->pid);
+ sched_show_task(t);
+ return;
+ }
+ }
+}
+#else
+#define debug_show_blocker(t) do {} while (0)
+#endif
+
static void check_hung_task(struct task_struct *t, unsigned long timeout)
{
unsigned long switch_count = t->nvcsw + t->nivcsw;
@@ -152,6 +187,7 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout)
pr_err("\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\""
" disables this message.\n");
sched_show_task(t);
+ debug_show_blocker(t);
hung_task_show_lock = true;
if (sysctl_hung_task_all_cpu_backtrace)
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index b36f23de48f1..6a543c204a14 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -72,6 +72,14 @@ static inline unsigned long __owner_flags(unsigned long owner)
return owner & MUTEX_FLAGS;
}
+/* Do not use the return value as a pointer directly. */
+unsigned long mutex_get_owner(struct mutex *lock)
+{
+ unsigned long owner = atomic_long_read(&lock->owner);
+
+ return (unsigned long)__owner_task(owner);
+}
+
/*
* Returns: __mutex_owner(lock) on failure or NULL on success.
*/
@@ -180,6 +188,9 @@ static void
__mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
struct list_head *list)
{
+#ifdef CONFIG_DETECT_HUNG_TASK_BLOCKER
+ WRITE_ONCE(current->blocker_mutex, lock);
+#endif
debug_mutex_add_waiter(lock, waiter, current);
list_add_tail(&waiter->list, list);
@@ -195,6 +206,9 @@ __mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter)
__mutex_clear_flag(lock, MUTEX_FLAGS);
debug_mutex_remove_waiter(lock, waiter, current);
+#ifdef CONFIG_DETECT_HUNG_TASK_BLOCKER
+ WRITE_ONCE(current->blocker_mutex, NULL);
+#endif
}
/*
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1af972a92d06..91dfd8c10fbb 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1260,6 +1260,16 @@ config BOOTPARAM_HUNG_TASK_PANIC
Say N if unsure.
+config DETECT_HUNG_TASK_BLOCKER
+ bool "Dump Hung Tasks Blocker"
+ depends on DETECT_HUNG_TASK
+ default y
+ help
+ Say Y here to show the blocker task's stacktrace who acquires
+ the mutex lock which "hung tasks" are waiting.
+ This will add overhead a bit but shows suspicious tasks and
+ call trace if it comes from waiting a mutex.
+
config WQ_WATCHDOG
bool "Detect Workqueue Stalls"
depends on DEBUG_KERNEL
Powered by blists - more mailing lists