linux-kernel - Re: [PATCH v6] arm64: dts: mediatek: mt8395-genio-1200-evk: add support for TCPC port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <43d23c40-09bd-46ca-840f-4724a42946a6@baylibre.com>
Date: Mon, 24 Feb 2025 15:28:35 +0100
From: Alexandre Mergnat <amergnat@...libre.com>
To: Macpaul Lin <macpaul.lin@...iatek.com>,
 ChiYuan Huang <cy_huang@...htek.com>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>,
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org
Cc: Bear Wang <bear.wang@...iatek.com>, Pablo Sun <pablo.sun@...iatek.com>,
 Macpaul Lin <macpaul@...il.com>,
 Project_Global_Chrome_Upstream_Group@...iatek.com,
 linux-usb@...r.kernel.org, Chris-qj chen <chris-qj.chen@...iatek.com>,
 Fabien Parent <fparent@...libre.com>,
 Yow-Shin Liou <yow-shin.liou@...iatek.com>,
 Simon Sun <simon.sun@...jingtech.com>
Subject: Re: [PATCH v6] arm64: dts: mediatek: mt8395-genio-1200-evk: add
 support for TCPC port

Reviewed-by: Alexandre Mergnat <amergnat@...libre.com>

On 24/02/2025 12:49, Macpaul Lin wrote:
> From: Fabien Parent<fparent@...libre.com>
> 
> Enable USB Type-C support on MediaTek MT8395 Genio 1200 EVK by adding
> configuration for TCPC Port, USB-C connector, MUX IT5205 and related
> settings.
> 
> Configure dual role switch capability, set up PD (Power Delivery) profiles,
> and establish endpoints for SS (SuperSpeed) and HS (HighSpeed) USB.
> 
> Update pinctrl configurations for U3 P0 VBus default pins and set dr_mode
> to "otg" for OTG (On-The-Go) mode operation.
> 
> Add ITE IT5205 (TYPEC MUX) under I2C2 bus and configure its properties;
> also add references and configurations to 'typec-mux' node.

-- 
Regards,
Alexandre