| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <771e1460-2372-4ecd-949b-016c1b91adb3@collabora.com>
Date: Mon, 24 Feb 2025 09:41:14 +0100
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Friday Yang <friday.yang@...iatek.com>, Yong Wu <yong.wu@...iatek.com>,
Krzysztof Kozlowski <krzk@...nel.org>, Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>, Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Project_Global_Chrome_Upstream_Group@...iatek.com
Subject: Re: [PATCH v4 2/2] memory: mtk-smi: mt8188: Add SMI reset and clamp
for MT8188
Il 21/02/25 08:48, Friday Yang ha scritto:
> From: "Friday Yang" <friday.yang@...iatek.com>
>
> To prevent handling glitch signals during MTCMOS on/off transitions,
> SMI requires clamp and reset operations. Parse the reset settings for
> SMI LARBs and the clamp settings for the SMI Sub-Common. Register
> genpd callback for the SMI LARBs located in image, camera and IPE
> subsystems, and apply reset and clamp operations within the callback.
>
> Signed-off-by: Friday Yang <friday.yang@...iatek.com>
> ---
> drivers/memory/mtk-smi.c | 141 +++++++++++++++++++++++++++++++++++++--
> 1 file changed, 137 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 5710348f72f6..51235c2a2081 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -10,11 +10,15 @@
> #include <linux/err.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> #include <linux/soc/mediatek/mtk_sip_svc.h>
> #include <soc/mediatek/smi.h>
> #include <dt-bindings/memory/mt2701-larb-port.h>
> @@ -36,6 +40,12 @@
> #define SMI_DCM 0x300
> #define SMI_DUMMY 0x444
>
> +#define SMI_COMMON_CLAMP_EN 0x3c0
> +#define SMI_COMMON_CLAMP_EN_SET 0x3c4
> +#define SMI_COMMON_CLAMP_EN_CLR 0x3c8
> +
> +#define SMI_SUB_COMM_INPORT_NR (8)
> +
> /* SMI LARB */
> #define SMI_LARB_SLP_CON 0xc
> #define SLP_PROT_EN BIT(0)
> @@ -134,6 +144,7 @@ struct mtk_smi_larb_gen {
> unsigned int larb_direct_to_common_mask;
> unsigned int flags_general;
> const u8 (*ostd)[SMI_LARB_PORT_NR_MAX];
> + const u8 *clamp_port;
> };
>
> struct mtk_smi {
> @@ -150,6 +161,7 @@ struct mtk_smi {
> };
>
> struct mtk_smi_larb { /* larb: local arbiter */
> + struct device *dev;
> struct mtk_smi smi;
> void __iomem *base;
> struct device *smi_common_dev; /* common or sub-common dev */
> @@ -157,6 +169,10 @@ struct mtk_smi_larb { /* larb: local arbiter */
> int larbid;
> u32 *mmu;
> unsigned char *bank;
> + struct regmap *sub_comm_syscon;
> + u8 sub_comm_inport;
> + struct notifier_block nb;
> + struct reset_control *rst_con;
> };
>
> static int
> @@ -377,6 +393,19 @@ static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
> [28] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
> };
>
> +static const u8 mtk_smi_larb_clamp_port_mt8188[MTK_LARB_NR_MAX] = {
> + [9] = BIT(1), /* larb10 */
> + [10] = BIT(2), /* larb11a */
> + [11] = BIT(2), /* larb11b */
> + [12] = BIT(3), /* larb11c */
> + [13] = BIT(0), /* larb12 */
> + [16] = BIT(1), /* larb15 */
> + [17] = BIT(2), /* larb16a */
> + [18] = BIT(2), /* larb16b */
> + [19] = BIT(3), /* larb17a */
> + [20] = BIT(3), /* larb17b */
> +};
> +
> static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
> .port_in_larb = {
> LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
> @@ -423,6 +452,7 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8188 = {
> .flags_general = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG |
> MTK_SMI_FLAG_SLEEP_CTL | MTK_SMI_FLAG_CFG_PORT_SEC_CTL,
> .ostd = mtk_smi_larb_mt8188_ostd,
> + .clamp_port = mtk_smi_larb_clamp_port_mt8188,
> };
>
> static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
> @@ -472,6 +502,46 @@ static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
> writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
> }
>
> +static int mtk_smi_larb_clamp_protect_enable(struct device *dev, bool enable)
> +{
> + struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> + u32 reg;
> + int ret;
> +
> + /* sub_comm_syscon could be NULL if larb directly linked to SMI common */
> + if (!larb->sub_comm_syscon)
> + return -EINVAL;
> +
> + reg = enable ? SMI_COMMON_CLAMP_EN_SET : SMI_COMMON_CLAMP_EN_CLR;
> +
> + ret = regmap_write(larb->sub_comm_syscon, reg,
> + larb->sub_comm_inport);
> + if (ret)
> + dev_err(dev, "Unable to %s clamp for input port %d: %d\n",
> + enable ? "enable" : "disable",
> + larb->sub_comm_inport, ret);
> +
> + return ret;
> +}
> +
> +static int mtk_smi_genpd_callback(struct notifier_block *nb,
> + unsigned long flags, void *data)
> +{
> + struct mtk_smi_larb *larb = container_of(nb, struct mtk_smi_larb, nb);
> + struct device *dev = larb->dev;
> +
> + if (flags == GENPD_NOTIFY_PRE_ON || flags == GENPD_NOTIFY_PRE_OFF) {
> + /* disable related SMI sub-common port */
> + mtk_smi_larb_clamp_protect_enable(dev, true);
> + } else if (flags == GENPD_NOTIFY_ON) {
> + /* enable related SMI sub-common port */
> + reset_control_reset(larb->rst_con);
> + mtk_smi_larb_clamp_protect_enable(dev, false);
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
> {
> struct platform_device *smi_com_pdev;
> @@ -528,6 +598,53 @@ static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi,
> return ret;
> }
>
> +static int mtk_smi_larb_parse_clamp_optional(struct mtk_smi_larb *larb)
> +{
> + struct device *dev = larb->dev;
> + const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
> + u32 larb_id;
> + int ret;
> +
> + /**
> + * Only SMI LARBs in camera, image and IPE subsys need to
> + * apply clamp and reset operations, others can be skipped.
> + */
> + ret = of_property_read_u32(dev->of_node, "mediatek,larb-id", &larb_id);
> + if (ret)
> + return -EINVAL;
> + if (!larb_gen->clamp_port || !larb_gen->clamp_port[larb_id])
> + return 0;
> +
> + larb->sub_comm_inport = larb_gen->clamp_port[larb_id];
> + larb->sub_comm_syscon = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "mediatek,smi");
> + if (IS_ERR(larb->sub_comm_syscon)) {
> + larb->sub_comm_syscon = NULL;
> + return dev_err_probe(dev, -EINVAL,
> + "Unknown clamp port for larb %d\n", larb_id);
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_smi_larb_parse_reset_optional(struct mtk_smi_larb *larb)
> +{
> + struct device *dev = larb->dev;
> + int ret;
> +
> + larb->rst_con = devm_reset_control_get_optional_exclusive(dev, "larb");
> + if (!larb->rst_con)
> + return 0;
> +
> + larb->nb.notifier_call = mtk_smi_genpd_callback;
> + ret = dev_pm_genpd_add_notifier(dev, &larb->nb);
> + if (ret)
> + return dev_err_probe(dev, -EINVAL,
> + "Failed to add genpd callback %d\n", ret);
> +
> + return 0;
> +}
> +
> static int mtk_smi_larb_probe(struct platform_device *pdev)
> {
> struct mtk_smi_larb *larb;
> @@ -538,6 +655,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
> if (!larb)
> return -ENOMEM;
>
> + larb->dev = dev;
> larb->larb_gen = of_device_get_match_data(dev);
> larb->base = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(larb->base))
> @@ -554,15 +672,24 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> - pm_runtime_enable(dev);
> + ret = mtk_smi_larb_parse_clamp_optional(larb);
> + if (ret)
> + goto err_link_remove;
> +
> + ret = mtk_smi_larb_parse_reset_optional(larb);
> + if (ret)
> + goto err_link_remove;
> +
To avoid changing functionality, please call pm_runtime_enable() here, before
component_add().
If you want to remove the goto, you could (please do it!) instead call
devm_pm_runtime_enable() and error check.
Everything else looks good!
Cheers,
Angelo
> platform_set_drvdata(pdev, larb);
> ret = component_add(dev, &mtk_smi_larb_component_ops);
> if (ret)
> - goto err_pm_disable;
> + goto err_link_remove;
> +
> + pm_runtime_enable(dev);
> +
> return 0;
>
> -err_pm_disable:
> - pm_runtime_disable(dev);
> +err_link_remove:
> device_link_remove(dev, larb->smi_common_dev);
> return ret;
> }
> @@ -686,6 +813,11 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8188_vpp = {
> .init = mtk_smi_common_mt8195_init,
> };
>
> +static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8188 = {
> + .type = MTK_SMI_GEN2_SUB_COMM,
> + .has_gals = true,
> +};
> +
> static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
> .type = MTK_SMI_GEN2,
> .has_gals = true,
> @@ -729,6 +861,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
> {.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
> {.compatible = "mediatek,mt8188-smi-common-vdo", .data = &mtk_smi_common_mt8188_vdo},
> {.compatible = "mediatek,mt8188-smi-common-vpp", .data = &mtk_smi_common_mt8188_vpp},
> + {.compatible = "mediatek,mt8188-smi-sub-common", .data = &mtk_smi_sub_common_mt8188},
> {.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
> {.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
> {.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
> --
> 2.46.0
>
Powered by blists - more mailing lists