| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250225121824.3869719-4-quic_amakhija@quicinc.com>
Date: Tue, 25 Feb 2025 17:48:16 +0530
From: Ayushi Makhija <quic_amakhija@...cinc.com>
To: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Ayushi Makhija <quic_amakhija@...cinc.com>, robdclark@...il.com,
dmitry.baryshkov@...aro.org, sean@...rly.run,
marijn.suijten@...ainline.org, andersson@...nel.org, robh@...nel.org,
robh+dt@...nel.org, krzk+dt@...nel.org, konradybcio@...nel.org,
conor+dt@...nel.org, andrzej.hajda@...el.com,
neil.armstrong@...aro.org, rfoss@...nel.org,
Laurent.pinchart@...asonboard.com, jonas@...boo.se,
jernej.skrabec@...il.com, quic_abhinavk@...cinc.com,
quic_rajeevny@...cinc.com, quic_vproddut@...cinc.com,
quic_jesszhan@...cinc.com
Subject: [PATCH 03/11] dt-bindings: display: msm: document DSI controller and phy on SA8775P
Document DSI controller and phy on SA8775P platform.
Signed-off-by: Ayushi Makhija <quic_amakhija@...cinc.com>
---
.../display/msm/qcom,sa8775p-mdss.yaml | 170 ++++++++++++++++++
1 file changed, 170 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
index a90a8b3f1a9e..25b65dda90ed 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -52,6 +52,22 @@ patternProperties:
items:
- const: qcom,sa8775p-dp
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sa8775p-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,sa8775p-dsi-phy-5nm
+ - qcom,sa8775p-edp-phy
+
required:
- compatible
@@ -158,6 +174,160 @@ examples:
};
};
+ dsi@...4000 {
+ compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispc_byte_clk>,
+ <&dispcc_intf_clk>,
+ <&dispcc_pclk>,
+ <&dispcc_esc_clk>,
+ <&dispcc_ahb_clk>,
+ <&gcc_bus_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc_byte_clk>,
+ <&dispcc_pclk>;
+ assigned-clock-parents = <&mdss0_dsi0_phy 0>, <&mdss0_dsi0_phy 1>;
+ phys = <&mdss0_dsi0_phy>;
+
+ operating-points-v2 = <&dsi0_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint { };
+ };
+ };
+
+ dsi0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss0_dsi0_phy: phy@...4400 {
+ compatible = "qcom,sa8775p-dsi-phy-5nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_iface_clk>,
+ <&rpmhcc_ref_clk>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&vreg_dsi_supply>;
+ };
+
+ dsi@...6000 {
+ compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispc_byte_clk>,
+ <&dispcc_intf_clk>,
+ <&dispcc_pclk>,
+ <&dispcc_esc_clk>,
+ <&dispcc_ahb_clk>,
+ <&gcc_bus_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc_byte_clk>,
+ <&dispcc_pclk>;
+ assigned-clock-parents = <&mdss0_dsi1_phy 0>, <&mdss0_dsi1_phy 1>;
+ phys = <&mdss0_dsi1_phy>;
+
+ operating-points-v2 = <&dsi1_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint { };
+ };
+ };
+
+ dsi1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss0_dsi1_phy: phy@...6400 {
+ compatible = "qcom,sa8775p-dsi-phy-5nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_iface_clk>,
+ <&rpmhcc_ref_clk>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&vreg_dsi_supply>;
+ };
+
displayport-controller@...4000 {
compatible = "qcom,sa8775p-dp";
--
2.34.1
Powered by blists - more mailing lists