[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250226-initial_display-v2-0-23fafa130817@gocontroll.com>
Date: Wed, 26 Feb 2025 15:19:11 +0100
From: Maud Spierings via B4 Relay <devnull+maudspierings.gocontroll.com@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Thierry Reding <thierry.reding@...il.com>, Sam Ravnborg <sam@...nborg.org>,
Liu Ying <victor.liu@....com>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Mark Brown <broonie@...nel.org>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-spi@...r.kernel.org,
Maud Spierings <maudspierings@...ontroll.com>
Subject: [PATCH v2 00/12] arm64: dts: freescale: Add support for the
GOcontroll Moduline Display
Add inital support for 2 variants of the Moduline Display controller.
This system is powered by the Ka-Ro Electronics tx8p-ml81 COM, which
features an imx8mp SoC.
Signed-off-by: Maud Spierings <maudspierings@...ontroll.com>
---
Changes in v2:
- Dropped the trivial-devices patch
- Added a patch with bindings for the gocontroll,moduline-module-slot
- Added a patch to spidev.c to enable the spidev driver for the module
slot
- Added a missing usb-c connector in the av101hdt-a10 variant dts
- Switched to the new bindings for the module slots in the base dts
- Fixed some commit typos
- Link to v1: https://lore.kernel.org/r/20250224-initial_display-v1-0-5ccbbf613543@gocontroll.com
---
Maud Spierings (12):
dt-bindings: arm: fsl: Add GOcontroll Moduline Display
dt-bindings: vendor-prefixes: add GOcontroll
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
arm64: dts: imx8mp: Add pinctrl config definitions
MAINTAINERS: add maintainer for the Ka-Ro tx8p-ml81 COM module
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline controllers
arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM
arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard
arm64: dts: freescale: Add the BOE av101hdt-a10 variant of the Moduline Display
arm64: dts: freescale: Add the BOE av123z7m-n17 variant of the Moduline Display
spi: spidev: Add an entry for the gocontroll moduline module slot
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
.../connector/gocontroll,moduline-module-slot.yaml | 88 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 17 +
arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h | 27 +
...tx8p-ml81-moduline-display-106-av101hdt-a10.dts | 100 ++++
...tx8p-ml81-moduline-display-106-av123z7m-n17.dts | 133 +++++
.../imx8mp-tx8p-ml81-moduline-display-106.dtsi | 535 ++++++++++++++++++++
.../arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi | 547 +++++++++++++++++++++
drivers/spi/spidev.c | 2 +
10 files changed, 1452 insertions(+)
---
base-commit: 2bc63dbeabecce860eb8b261bf67b97552fe7747
change-id: 20250224-initial_display-fa82218e06e5
Best regards,
--
Maud Spierings <maudspierings@...ontroll.com>
Powered by blists - more mailing lists