[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<OSBPR01MB27752329B962BAC78F341440FFC22@OSBPR01MB2775.jpnprd01.prod.outlook.com>
Date: Wed, 26 Feb 2025 15:40:36 +0000
From: John Madieu <john.madieu.xa@...renesas.com>
To: Rob Herring <robh@...nel.org>
CC: "mturquette@...libre.com" <mturquette@...libre.com>,
"magnus.damm@...il.com" <magnus.damm@...il.com>, "krzk+dt@...nel.org"
<krzk+dt@...nel.org>, "rui.zhang@...el.com" <rui.zhang@...el.com>,
"daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>, "sboyd@...nel.org"
<sboyd@...nel.org>, "geert+renesas@...der.be" <geert+renesas@...der.be>,
"lukasz.luba@....com" <lukasz.luba@....com>, "rafael@...nel.org"
<rafael@...nel.org>, "p.zabel@...gutronix.de" <p.zabel@...gutronix.de>, Biju
Das <biju.das.jz@...renesas.com>, Claudiu Beznea
<claudiu.beznea.uj@...renesas.com>, "conor+dt@...nel.org"
<conor+dt@...nel.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "john.madieu@...il.com"
<john.madieu@...il.com>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-renesas-soc@...r.kernel.org"
<linux-renesas-soc@...r.kernel.org>, "linux-clk@...r.kernel.org"
<linux-clk@...r.kernel.org>
Subject: RE: [PATCH 3/7] dt-bindings: thermal: r9a09g047-tsu: Document the TSU
unit
Hi Rob,
Thanks for your review.
> -----Original Message-----
> From: Rob Herring <robh@...nel.org>
> Sent: Thursday, February 20, 2025 8:17 PM
> Subject: Re: [PATCH 3/7] dt-bindings: thermal: r9a09g047-tsu: Document the
> TSU unit
>
> On Thu, Feb 20, 2025 at 04:26:08PM +0100, John Madieu wrote:
> > The Renesas RZ/G3E SoC includes a Thermal Sensor Unit (TSU) block
> > designed to measure the junction temperature. The device provides
> > real-time temperature measurements for thermal management, utilizing a
> > single dedicated channel (channel 1) for temperature sensing.
> >
> > Signed-off-by: John Madieu <john.madieu.xa@...renesas.com>
> > ---
> > .../thermal/renesas,r9a09g047-tsu.yaml | 123 ++++++++++++++++++
> > 1 file changed, 123 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > new file mode 100644
> > index 000000000000..dbd3860a31d0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.
> > +++ yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +title: Renesas RZ/G3E Temperature Sensor Unit (TSU)
> > +
> > +maintainers:
> > + - John Madieu <john.madieu.xa@...renesas.com>
> > +
> > +description: |
>
> Don't need '|' if there is no formatting to preserve.
Got it, Thanks! Will remove it in v2 since there is no
special formatting requirement here.
>
> > + The Temperature Sensor Unit (TSU) is an integrated thermal sensor
> > + that monitors
>
> Wrap lines at <80 char.
Will do in v2.
>
> > + the chip temperature on the Renesas RZ/G3E SoC. The TSU provides
> > + real-time temperature measurements for thermal management.
> > +
> > +properties:
> > + compatible:
> > + const: renesas,r9a09g047-tsu
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + interrupts:
> > + description: |
> > + Interrupt specifiers for the TSU:
> > + - S12TSUADI1: Conversion complete interrupt signal (pulse)
> > + - S12TSUADCMPI1: Comparison result interrupt signal (level)
> > +
> > + interrupt-names:
> > + items:
> > + - const: S12TSUADI1
> > + - const: S12TSUADCMPI1
>
> Odd names for the interrupts... 'S12TSUAD' is the same for both, so that
> part is redundant from my perspective. I guess if these strings are
> meaningful for anyone familiar with this h/w, then it's fine.
These names come from HW manual. I can change them into "conv"
(for conversion complete irq) and "cmp" (for comparison
complete irq). What do you think ?
>
> > +
> > + "#thermal-sensor-cells":
> > + const: 0
> > +
> > + renesas,tsu-calibration-sys:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: |
> > + Phandle to the system controller (sys) that contains the TSU
> > + calibration values used for temperature calculations.
> > +
sensor_crit: sensor-crit {
> > + temperature = <120000>;
> > + hysteresis = <1000>;
> > + type = "critical";
> > + };
> > + };
> > + };
> > + };
Cheers,
John!
> > --
> > 2.25.1
> >
Powered by blists - more mailing lists