linux-kernel - [PATCH v2 2/2] ARM: dts: qcom: msm8960: Add tsens

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250226-expressatt-tsens-v2-2-7a4ce3a91f27@gmail.com>
Date: Wed, 26 Feb 2025 00:11:09 -0800
From: Rudraksha Gupta <guptarud@...il.com>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Rudraksha Gupta <guptarud@...il.com>, 
 wctrl <wctrl@...ton.me>
Subject: [PATCH v2 2/2] ARM: dts: qcom: msm8960: Add tsens

Copy tsens node from ap8064 and adjust some values

Co-developed-by: wctrl <wctrl@...ton.me>
Signed-off-by: wctrl <wctrl@...ton.me>
Signed-off-by: Rudraksha Gupta <guptarud@...il.com>
---
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 59 +++++++++++++++++++++++++++++++-
 1 file changed, 58 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 865fe7cc39511d7cb9ec5c4b12100404f77e2989..155d6aba61e390dabca6b72160543b5aa134b219 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -52,6 +52,36 @@ memory@...00000 {
 		reg = <0x80000000 0>;
 	};
 
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <GIC_PPI 10 0x304>;
@@ -115,6 +145,21 @@ timer@...a000 {
 			cpu-offset = <0x80000>;
 		};
 
+		qfprom: efuse@...000 {
+			compatible = "qcom,msm8960-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_calib: calib@404 {
+				reg = <0x404 0x10>;
+			};
+
+			tsens_backup: backup-calib@414 {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		msmgpio: pinctrl@...000 {
 			compatible = "qcom,msm8960-pinctrl";
 			gpio-controller;
@@ -127,7 +172,7 @@ msmgpio: pinctrl@...000 {
 		};
 
 		gcc: clock-controller@...000 {
-			compatible = "qcom,gcc-msm8960";
+			compatible = "qcom,gcc-msm8960", "syscon";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
@@ -135,6 +180,18 @@ gcc: clock-controller@...000 {
 				 <&pxo_board>,
 				 <&lcc PLL4>;
 			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <5>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
 		lcc: clock-controller@...00000 {

-- 
2.45.2