| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250227154012.259566-5-c.parant@phytec.fr>
Date: Thu, 27 Feb 2025 16:40:05 +0100
From: Christophe Parant <c.parant@...tec.fr>
To: <devicetree@...r.kernel.org>, <linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
CC: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Maxime Coquelin
<mcoquelin.stm32@...il.com>, Alexandre Torgue <alexandre.torgue@...s.st.com>,
<upstream@...ts.phytec.de>
Subject: [PATCH 04/11] ARM: dts: stm32: Add new pinmux groups for phyboard-sargas and phycore
Add add alternate pinmux for following interfaces used on
phyBOARD-Sargas:
- UART4
- LTDC
- DCMI
- TIM5
- SAI2
Fix "ethernet0_rgmii_pins_d" pinmux used on phyCORE-STM32MP15x:
ETH_RGMII_GTX_CLK pin was missing.
Signed-off-by: Christophe Parant <c.parant@...tec.fr>
---
arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 164 ++++++++++++++++++++
1 file changed, 164 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
index 95fafc51a1c8..963d8616f3c1 100644
--- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -216,6 +216,45 @@ pins {
};
};
+ /omit-if-no-ref/
+ dcmi_pins_d: dcmi-3 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('C', 7, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('E', 5, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('I', 7, AF13)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, AF13)>;/* DCMI_D9 */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ dcmi_sleep_pins_d: dcmi-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('C', 7, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('E', 5, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('I', 7, ANALOG)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, ANALOG)>;/* DCMI_D9 */
+ };
+ };
+
/omit-if-no-ref/
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
@@ -379,6 +418,7 @@ pins1 {
ethernet0_rgmii_pins_d: rgmii-3 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
<STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
<STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
@@ -1220,6 +1260,65 @@ pins {
};
};
+ /omit-if-no-ref/
+ ltdc_pins_f: ltdc-5 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('C', 10, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('B', 0, AF9)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('H', 4, AF9)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 11, AF9)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('G', 11, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('I', 5, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ /omit-if-no-ref/
+ ltdc_sleep_pins_f: ltdc-sleep-5 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('H', 4, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('G', 11, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('I', 5, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
/omit-if-no-ref/
mco1_pins_a: mco1-0 {
pins {
@@ -1543,6 +1642,23 @@ pins {
};
};
+ /omit-if-no-ref/
+ pwm5_pins_c: pwm5-2 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ /omit-if-no-ref/
+ pwm5_sleep_pins_c: pwm5-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+ };
+ };
+
/omit-if-no-ref/
pwm8_pins_a: pwm8-0 {
pins {
@@ -1768,6 +1884,21 @@ pins {
};
};
+ /omit-if-no-ref/
+ sai2a_pins_d: sai2a-3 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 6, AF10)>; /* SAI2_SD_A */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ sai2a_sleep_pins_d: sai2a-3 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 6, ANALOG)>; /* SAI2_SD_A */
+ };
+ };
+
/omit-if-no-ref/
sai2b_pins_a: sai2b-0 {
pins1 {
@@ -2600,6 +2731,39 @@ pins {
};
};
+ /omit-if-no-ref/
+ uart4_pins_e: uart4-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ uart4_idle_pins_e: uart4-idle-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ /omit-if-no-ref/
+ uart4_sleep_pins_e: uart4-sleep-4 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+ };
+ };
+
/omit-if-no-ref/
uart5_pins_a: uart5-0 {
pins1 {
--
2.34.1
Powered by blists - more mailing lists