| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2ac0832f6ede17a5c111ede09b44b8a126e33e36.1740671156.git.Ryan.Wanner@microchip.com>
Date: Thu, 27 Feb 2025 08:51:59 -0700
From: <Ryan.Wanner@...rochip.com>
To: <lee@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <claudiu.beznea@...on.dev>, <sre@...nel.org>,
<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<p.zabel@...gutronix.de>
CC: <linux@...linux.org.uk>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-rtc@...r.kernel.org>, "Ryan
Wanner" <Ryan.Wanner@...rochip.com>
Subject: [PATCH v3 12/21] ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65
From: Ryan Wanner <Ryan.Wanner@...rochip.com>
New clocks are saved to enable ULP0/ULP1 for SAMA7D65 because this SoC has a
total of 9 main clocks that need to be saved for ULP0/ULP1 mode.
Add mcks member to at91_pm_data, this will be used to determine
how many main clocks need to be saved. In the pm_mcks variable will also make
sure that no unnecessary clock settings are written during
mck_ps_restore.
Signed-off-by: Ryan Wanner <Ryan.Wanner@...rochip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
---
arch/arm/mach-at91/pm.c | 11 ++-
arch/arm/mach-at91/pm.h | 1 +
arch/arm/mach-at91/pm_data-offsets.c | 2 +
arch/arm/mach-at91/pm_suspend.S | 101 ++++++++++++++++++++++++---
4 files changed, 105 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index d82a507bc8da..ab51ca03632b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1340,6 +1340,7 @@ struct pmc_info {
unsigned long uhp_udp_mask;
unsigned long mckr;
unsigned long version;
+ unsigned long mcks;
};
static const struct pmc_info pmc_infos[] __initconst = {
@@ -1371,6 +1372,13 @@ static const struct pmc_info pmc_infos[] __initconst = {
{
.mckr = 0x28,
.version = AT91_PMC_V2,
+ .mcks = 4,
+ },
+ {
+ .uhp_udp_mask = AT91SAM926x_PMC_UHP,
+ .mckr = 0x28,
+ .version = AT91_PMC_V2,
+ .mcks = 9,
},
};
@@ -1389,7 +1397,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
{ .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] },
- { .compatible = "microchip,sama7d65-pmc", .data = &pmc_infos[4] },
+ { .compatible = "microchip,sama7d65-pmc", .data = &pmc_infos[6] },
{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
{ /* sentinel */ },
};
@@ -1460,6 +1468,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
soc_pm.data.pmc_mckr_offset = pmc->mckr;
soc_pm.data.pmc_version = pmc->version;
+ soc_pm.data.pmc_mcks = pmc->mcks;
if (pm_idle)
arm_pm_idle = pm_idle;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 53bdc9000e44..50c3a425d140 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -39,6 +39,7 @@ struct at91_pm_data {
unsigned int suspend_mode;
unsigned int pmc_mckr_offset;
unsigned int pmc_version;
+ unsigned int pmc_mcks;
};
#endif
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 40bd4e8fe40a..0ca5da66dc26 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -18,6 +18,8 @@ int main(void)
pmc_mckr_offset));
DEFINE(PM_DATA_PMC_VERSION, offsetof(struct at91_pm_data,
pmc_version));
+ DEFINE(PM_DATA_PMC_MCKS, offsetof(struct at91_pm_data,
+ pmc_mcks));
return 0;
}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index e5869cca5e79..e23b86834096 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -814,18 +814,20 @@ sr_dis_exit:
.endm
/**
- * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock
+ * at91_mckx_ps_enable: save MCK settings and switch it to main clock
*
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2, tmp3
*/
.macro at91_mckx_ps_enable
#ifdef CONFIG_SOC_SAMA7
ldr pmc, .pmc_base
+ ldr tmp3, .mcks
- /* There are 4 MCKs we need to handle: MCK1..4 */
+ /* Start at MCK1 and go until MCKs */
mov tmp1, #1
-e_loop: cmp tmp1, #5
- beq e_done
+e_loop:
+ cmp tmp1, tmp3
+ bgt e_done
/* Write MCK ID to retrieve the settings. */
str tmp1, [pmc, #AT91_PMC_MCR_V2]
@@ -850,7 +852,37 @@ e_save_mck3:
b e_ps
e_save_mck4:
+ cmp tmp1, #4
+ bne e_save_mck5
str tmp2, .saved_mck4
+ b e_ps
+
+e_save_mck5:
+ cmp tmp1, #5
+ bne e_save_mck6
+ str tmp2, .saved_mck5
+ b e_ps
+
+e_save_mck6:
+ cmp tmp1, #6
+ bne e_save_mck7
+ str tmp2, .saved_mck6
+ b e_ps
+
+e_save_mck7:
+ cmp tmp1, #7
+ bne e_save_mck8
+ str tmp2, .saved_mck7
+ b e_ps
+
+e_save_mck8:
+ cmp tmp1, #8
+ bne e_save_mck9
+ str tmp2, .saved_mck8
+ b e_ps
+
+e_save_mck9:
+ str tmp2, .saved_mck9
e_ps:
/* Use CSS=MAINCK and DIV=1. */
@@ -870,18 +902,20 @@ e_done:
.endm
/**
- * at91_mckx_ps_restore: restore MCK1..4 settings
+ * at91_mckx_ps_restore: restore MCKx settings
*
* Side effects: overwrites tmp1, tmp2
*/
.macro at91_mckx_ps_restore
#ifdef CONFIG_SOC_SAMA7
ldr pmc, .pmc_base
+ ldr tmp2, .mcks
- /* There are 4 MCKs we need to handle: MCK1..4 */
+ /* Start from MCK1 and go up to MCKs */
mov tmp1, #1
-r_loop: cmp tmp1, #5
- beq r_done
+r_loop:
+ cmp tmp1, tmp2
+ bgt r_done
r_save_mck1:
cmp tmp1, #1
@@ -902,7 +936,37 @@ r_save_mck3:
b r_ps
r_save_mck4:
+ cmp tmp1, #4
+ bne r_save_mck5
ldr tmp2, .saved_mck4
+ b r_ps
+
+r_save_mck5:
+ cmp tmp1, #5
+ bne r_save_mck6
+ ldr tmp2, .saved_mck5
+ b r_ps
+
+r_save_mck6:
+ cmp tmp1, #6
+ bne r_save_mck7
+ ldr tmp2, .saved_mck6
+ b r_ps
+
+r_save_mck7:
+ cmp tmp1, #7
+ bne r_save_mck8
+ ldr tmp2, .saved_mck7
+ b r_ps
+
+r_save_mck8:
+ cmp tmp1, #8
+ bne r_save_mck9
+ ldr tmp2, .saved_mck8
+ b r_ps
+
+r_save_mck9:
+ ldr tmp2, .saved_mck9
r_ps:
/* Write MCK ID to retrieve the settings. */
@@ -921,6 +985,7 @@ r_ps:
wait_mckrdy tmp1
add tmp1, tmp1, #1
+ ldr tmp2, .mcks
b r_loop
r_done:
#endif
@@ -1045,6 +1110,10 @@ ENTRY(at91_pm_suspend_in_sram)
str tmp1, .memtype
ldr tmp1, [r0, #PM_DATA_MODE]
str tmp1, .pm_mode
+#ifdef CONFIG_SOC_SAMA7
+ ldr tmp1, [r0, #PM_DATA_PMC_MCKS]
+ str tmp1, .mcks
+#endif
/*
* ldrne below are here to preload their address in the TLB as access
@@ -1132,6 +1201,10 @@ ENDPROC(at91_pm_suspend_in_sram)
.word 0
.pmc_version:
.word 0
+#ifdef CONFIG_SOC_SAMA7
+.mcks:
+ .word 0
+#endif
.saved_mckr:
.word 0
.saved_pllar:
@@ -1155,6 +1228,16 @@ ENDPROC(at91_pm_suspend_in_sram)
.word 0
.saved_mck4:
.word 0
+.saved_mck5:
+ .word 0
+.saved_mck6:
+ .word 0
+.saved_mck7:
+ .word 0
+.saved_mck8:
+ .word 0
+.saved_mck9:
+ .word 0
#endif
ENTRY(at91_pm_suspend_in_sram_sz)
--
2.43.0
Powered by blists - more mailing lists