[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdUfZSP3BDmKYTBDbKFe=KVR6TtscMQZov4+UDoMXgZwGQ@mail.gmail.com>
Date: Thu, 27 Feb 2025 11:33:16 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
Cc: tomm.merciai@...il.com, linux-renesas-soc@...r.kernel.org,
linux-media@...r.kernel.org, biju.das.jz@...renesas.com,
prabhakar.mahadev-lad.rj@...renesas.com, Rob Herring <robh@...nel.org>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 01/17] media: dt-bindings: renesas,rzg2l-csi2: Document
Renesas RZ/V2H(P) SoC
Hi Tommaso,
On Wed, 26 Feb 2025 at 16:25, Tommaso Merciai
<tommaso.merciai.xr@...renesas.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> found on the Renesas RZ/G2L SoC, with the following differences:
> - A different D-PHY
> - Additional registers for the MIPI CSI-2 link
> - Only two clocks
>
> Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> SoC.
>
> Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
Thanks for your patch!
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -48,7 +58,8 @@ properties:
> resets:
> items:
> - description: CRU_PRESETN reset terminal
> - - description: CRU_CMN_RSTB reset terminal
> + - description:
> + CRU_CMN_RSTB reset terminal (all but RZ/V2H(P)) or D-PHY reset (RZ/V2H(P))
According to the flowcharts[1] in the RZ/G2L, RZ/V2L, and RZ/G2UL
documentation, CPG_RST_CRU.CRU_CMN_RSTB is the D-PHY reset on all of
them, so I think you can just write "D-PHY reset".
Or "D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)"?
[1] Section 35. Camera Data Receiving Unit (CRU)
35.3.1 Starting Reception for the MIPI CSI-2 Input
35.3.2.2Stopping the D-PHY (MIPI CSI-2 Input)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists