| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5089b69f-1f56-4a57-9c9a-37fc4357611b@linaro.org>
Date: Fri, 28 Feb 2025 14:40:20 +0100
From: neil.armstrong@...aro.org
To: Vikash Garodia <quic_vgarodia@...cinc.com>,
Dikshita Agarwal <quic_dikshita@...cinc.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/4] media: platform: qcom/iris: add sm8650 support
On 28/02/2025 14:35, Vikash Garodia wrote:
>
>
> On 2/28/2025 6:05 PM, Neil Armstrong wrote:
>> On 28/02/2025 13:15, Dikshita Agarwal wrote:
>>>
>>>
>>> On 2/25/2025 2:35 PM, Neil Armstrong wrote:
>>>> Add support for the SM8650 platform by re-using the SM8550
>>>> definitions and using the vpu33 ops.
>>>>
>>>> The SM8650/vpu33 requires more reset lines, but the H.284
>>>> decoder capabilities are identical.
>>>>
>>> As you also noted, only delta between SM8550 and SM8650 is reset lines,
>>> rest all configurations are same. Could you think of a better way to reuse
>>> SM8550 platform data for SM8650.
>>
>> It depends on how you plan to keep compat in long term, while it's very
>> similar for H.264 decoding, it differs for other codecs.
>>
>> So we would indeed have common stuff for now, but when introducing
>> now codecs we would need separate definitions.
> SM8550 and SM8650 have same capabilities for other video codecs as well.
Ok it's not obvious when looking at downstream, so
I guess we can share the same platform file for both platforms ?
or add a common code with only the iris_platform_data in each soc code ?
Neil
>
> Regards,
> Vikash
>>
>> Neil
>>
>>>
>>> Thanks,
>>> Dikshita
>>>> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
>>>> ---
>>>> drivers/media/platform/qcom/iris/Makefile | 1 +
>>>> .../platform/qcom/iris/iris_platform_common.h | 1 +
>>>> .../platform/qcom/iris/iris_platform_sm8650.c | 266 +++++++++++++++++++++
>>>> drivers/media/platform/qcom/iris/iris_probe.c | 4 +
>>>> 4 files changed, 272 insertions(+)
>>>>
>>>> diff --git a/drivers/media/platform/qcom/iris/Makefile
>>>> b/drivers/media/platform/qcom/iris/Makefile
>>>> index
>>>> 6b64c9988505afd9707c704449d60bb53209229f..4caba81a95b806b9fa4937d9c7973031dea43d0e 100644
>>>> --- a/drivers/media/platform/qcom/iris/Makefile
>>>> +++ b/drivers/media/platform/qcom/iris/Makefile
>>>> @@ -11,6 +11,7 @@ qcom-iris-objs += \
>>>> iris_hfi_gen2_response.o \
>>>> iris_hfi_queue.o \
>>>> iris_platform_sm8550.o \
>>>> + iris_platform_sm8650.o \
>>>> iris_power.o \
>>>> iris_probe.o \
>>>> iris_resources.o \
>>>> diff --git a/drivers/media/platform/qcom/iris/iris_platform_common.h
>>>> b/drivers/media/platform/qcom/iris/iris_platform_common.h
>>>> index
>>>> f6b15d2805fb2004699709bb12cd7ce9b052180c..75e266a6b718acb8518079c2125dfb30435cbf2b 100644
>>>> --- a/drivers/media/platform/qcom/iris/iris_platform_common.h
>>>> +++ b/drivers/media/platform/qcom/iris/iris_platform_common.h
>>>> @@ -35,6 +35,7 @@ enum pipe_type {
>>>> extern struct iris_platform_data sm8250_data;
>>>> extern struct iris_platform_data sm8550_data;
>>>> +extern struct iris_platform_data sm8650_data;
>>>> enum platform_clk_type {
>>>> IRIS_AXI_CLK,
>>>> diff --git a/drivers/media/platform/qcom/iris/iris_platform_sm8650.c
>>>> b/drivers/media/platform/qcom/iris/iris_platform_sm8650.c
>>>> new file mode 100644
>>>> index
>>>> 0000000000000000000000000000000000000000..823e349dead2606129e52d6d2d674cb2550eaf17
>>>> --- /dev/null
>>>> +++ b/drivers/media/platform/qcom/iris/iris_platform_sm8650.c
>>>> @@ -0,0 +1,266 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights
>>>> reserved.
>>>> + */
>>>> +
>>>> +#include "iris_core.h"
>>>> +#include "iris_ctrls.h"
>>>> +#include "iris_hfi_gen2.h"
>>>> +#include "iris_hfi_gen2_defines.h"
>>>> +#include "iris_platform_common.h"
>>>> +#include "iris_vpu_common.h"
>>>> +
>>>> +#define VIDEO_ARCH_LX 1
>>>> +
>>>> +static struct platform_inst_fw_cap inst_fw_cap_sm8650[] = {
>>>> + {
>>>> + .cap_id = PROFILE,
>>>> + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
>>>> + .max = V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH,
>>>> + .step_or_mask = BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_HIGH) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH),
>>>> + .value = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
>>>> + .hfi_id = HFI_PROP_PROFILE,
>>>> + .flags = CAP_FLAG_OUTPUT_PORT | CAP_FLAG_MENU,
>>>> + .set = iris_set_u32_enum,
>>>> + },
>>>> + {
>>>> + .cap_id = LEVEL,
>>>> + .min = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
>>>> + .max = V4L2_MPEG_VIDEO_H264_LEVEL_6_2,
>>>> + .step_or_mask = BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_0) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1B) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_1) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_2) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_1_3) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_0) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_1) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_2_2) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_0) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_1) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_3_2) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_0) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_5_1) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_5_2) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_6_0) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_6_1) |
>>>> + BIT(V4L2_MPEG_VIDEO_H264_LEVEL_6_2),
>>>> + .value = V4L2_MPEG_VIDEO_H264_LEVEL_6_1,
>>>> + .hfi_id = HFI_PROP_LEVEL,
>>>> + .flags = CAP_FLAG_OUTPUT_PORT | CAP_FLAG_MENU,
>>>> + .set = iris_set_u32_enum,
>>>> + },
>>>> + {
>>>> + .cap_id = INPUT_BUF_HOST_MAX_COUNT,
>>>> + .min = DEFAULT_MAX_HOST_BUF_COUNT,
>>>> + .max = DEFAULT_MAX_HOST_BURST_BUF_COUNT,
>>>> + .step_or_mask = 1,
>>>> + .value = DEFAULT_MAX_HOST_BUF_COUNT,
>>>> + .hfi_id = HFI_PROP_BUFFER_HOST_MAX_COUNT,
>>>> + .flags = CAP_FLAG_INPUT_PORT,
>>>> + .set = iris_set_u32,
>>>> + },
>>>> + {
>>>> + .cap_id = STAGE,
>>>> + .min = STAGE_1,
>>>> + .max = STAGE_2,
>>>> + .step_or_mask = 1,
>>>> + .value = STAGE_2,
>>>> + .hfi_id = HFI_PROP_STAGE,
>>>> + .set = iris_set_stage,
>>>> + },
>>>> + {
>>>> + .cap_id = PIPE,
>>>> + .min = PIPE_1,
>>>> + .max = PIPE_4,
>>>> + .step_or_mask = 1,
>>>> + .value = PIPE_4,
>>>> + .hfi_id = HFI_PROP_PIPE,
>>>> + .set = iris_set_pipe,
>>>> + },
>>>> + {
>>>> + .cap_id = POC,
>>>> + .min = 0,
>>>> + .max = 2,
>>>> + .step_or_mask = 1,
>>>> + .value = 1,
>>>> + .hfi_id = HFI_PROP_PIC_ORDER_CNT_TYPE,
>>>> + },
>>>> + {
>>>> + .cap_id = CODED_FRAMES,
>>>> + .min = CODED_FRAMES_PROGRESSIVE,
>>>> + .max = CODED_FRAMES_PROGRESSIVE,
>>>> + .step_or_mask = 0,
>>>> + .value = CODED_FRAMES_PROGRESSIVE,
>>>> + .hfi_id = HFI_PROP_CODED_FRAMES,
>>>> + },
>>>> + {
>>>> + .cap_id = BIT_DEPTH,
>>>> + .min = BIT_DEPTH_8,
>>>> + .max = BIT_DEPTH_8,
>>>> + .step_or_mask = 1,
>>>> + .value = BIT_DEPTH_8,
>>>> + .hfi_id = HFI_PROP_LUMA_CHROMA_BIT_DEPTH,
>>>> + },
>>>> + {
>>>> + .cap_id = RAP_FRAME,
>>>> + .min = 0,
>>>> + .max = 1,
>>>> + .step_or_mask = 1,
>>>> + .value = 1,
>>>> + .hfi_id = HFI_PROP_DEC_START_FROM_RAP_FRAME,
>>>> + .flags = CAP_FLAG_INPUT_PORT,
>>>> + .set = iris_set_u32,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct platform_inst_caps platform_inst_cap_sm8650 = {
>>>> + .min_frame_width = 96,
>>>> + .max_frame_width = 8192,
>>>> + .min_frame_height = 96,
>>>> + .max_frame_height = 8192,
>>>> + .max_mbpf = (8192 * 4352) / 256,
>>>> + .mb_cycles_vpp = 200,
>>>> + .mb_cycles_fw = 489583,
>>>> + .mb_cycles_fw_vpp = 66234,
>>>> + .num_comv = 0,
>>>> +};
>>>> +
>>>> +static void iris_set_sm8650_preset_registers(struct iris_core *core)
>>>> +{
>>>> + writel(0x0, core->reg_base + 0xB0088);
>>>> +}
>>>> +
>>>> +static const struct icc_info sm8650_icc_table[] = {
>>>> + { "cpu-cfg", 1000, 1000 },
>>>> + { "video-mem", 1000, 15000000 },
>>>> +};
>>>> +
>>>> +static const char * const sm8650_clk_reset_table[] = { "bus", "xo", "core" };
>>>> +
>>>> +static const struct bw_info sm8650_bw_table_dec[] = {
>>>> + { ((4096 * 2160) / 256) * 60, 1608000 },
>>>> + { ((4096 * 2160) / 256) * 30, 826000 },
>>>> + { ((1920 * 1080) / 256) * 60, 567000 },
>>>> + { ((1920 * 1080) / 256) * 30, 294000 },
>>>> +};
>>>> +
>>>> +static const char * const sm8650_pmdomain_table[] = { "venus", "vcodec0" };
>>>> +
>>>> +static const char * const sm8650_opp_pd_table[] = { "mxc", "mmcx" };
>>>> +
>>>> +static const struct platform_clk_data sm8650_clk_table[] = {
>>>> + {IRIS_AXI_CLK, "iface" },
>>>> + {IRIS_CTRL_CLK, "core" },
>>>> + {IRIS_HW_CLK, "vcodec0_core" },
>>>> +};
>>>> +
>>>> +static struct ubwc_config_data ubwc_config_sm8650 = {
>>>> + .max_channels = 8,
>>>> + .mal_length = 32,
>>>> + .highest_bank_bit = 16,
>>>> + .bank_swzl_level = 0,
>>>> + .bank_swz2_level = 1,
>>>> + .bank_swz3_level = 1,
>>>> + .bank_spreading = 1,
>>>> +};
>>>> +
>>>> +static struct tz_cp_config tz_cp_config_sm8650 = {
>>>> + .cp_start = 0,
>>>> + .cp_size = 0x25800000,
>>>> + .cp_nonpixel_start = 0x01000000,
>>>> + .cp_nonpixel_size = 0x24800000,
>>>> +};
>>>> +
>>>> +static const u32 sm8650_vdec_input_config_params[] = {
>>>> + HFI_PROP_BITSTREAM_RESOLUTION,
>>>> + HFI_PROP_CROP_OFFSETS,
>>>> + HFI_PROP_CODED_FRAMES,
>>>> + HFI_PROP_BUFFER_FW_MIN_OUTPUT_COUNT,
>>>> + HFI_PROP_PIC_ORDER_CNT_TYPE,
>>>> + HFI_PROP_PROFILE,
>>>> + HFI_PROP_LEVEL,
>>>> + HFI_PROP_SIGNAL_COLOR_INFO,
>>>> +};
>>>> +
>>>> +static const u32 sm8650_vdec_output_config_params[] = {
>>>> + HFI_PROP_COLOR_FORMAT,
>>>> + HFI_PROP_LINEAR_STRIDE_SCANLINE,
>>>> +};
>>>> +
>>>> +static const u32 sm8650_vdec_subscribe_input_properties[] = {
>>>> + HFI_PROP_NO_OUTPUT,
>>>> +};
>>>> +
>>>> +static const u32 sm8650_vdec_subscribe_output_properties[] = {
>>>> + HFI_PROP_PICTURE_TYPE,
>>>> + HFI_PROP_CABAC_SESSION,
>>>> +};
>>>> +
>>>> +static const u32 sm8650_dec_ip_int_buf_tbl[] = {
>>>> + BUF_BIN,
>>>> + BUF_COMV,
>>>> + BUF_NON_COMV,
>>>> + BUF_LINE,
>>>> +};
>>>> +
>>>> +static const u32 sm8650_dec_op_int_buf_tbl[] = {
>>>> + BUF_DPB,
>>>> +};
>>>> +
>>>> +struct iris_platform_data sm8650_data = {
>>>> + .get_instance = iris_hfi_gen2_get_instance,
>>>> + .init_hfi_command_ops = iris_hfi_gen2_command_ops_init,
>>>> + .init_hfi_response_ops = iris_hfi_gen2_response_ops_init,
>>>> + .vpu_ops = &iris_vpu33_ops,
>>>> + .set_preset_registers = iris_set_sm8650_preset_registers,
>>>> + .icc_tbl = sm8650_icc_table,
>>>> + .icc_tbl_size = ARRAY_SIZE(sm8650_icc_table),
>>>> + .clk_rst_tbl = sm8650_clk_reset_table,
>>>> + .clk_rst_tbl_size = ARRAY_SIZE(sm8650_clk_reset_table),
>>>> + .bw_tbl_dec = sm8650_bw_table_dec,
>>>> + .bw_tbl_dec_size = ARRAY_SIZE(sm8650_bw_table_dec),
>>>> + .pmdomain_tbl = sm8650_pmdomain_table,
>>>> + .pmdomain_tbl_size = ARRAY_SIZE(sm8650_pmdomain_table),
>>>> + .opp_pd_tbl = sm8650_opp_pd_table,
>>>> + .opp_pd_tbl_size = ARRAY_SIZE(sm8650_opp_pd_table),
>>>> + .clk_tbl = sm8650_clk_table,
>>>> + .clk_tbl_size = ARRAY_SIZE(sm8650_clk_table),
>>>> + /* Upper bound of DMA address range */
>>>> + .dma_mask = 0xe0000000 - 1,
>>>> + .fwname = "qcom/vpu/vpu33_p4.mbn",
>>>> + .pas_id = IRIS_PAS_ID,
>>>> + .inst_caps = &platform_inst_cap_sm8650,
>>>> + .inst_fw_caps = inst_fw_cap_sm8650,
>>>> + .inst_fw_caps_size = ARRAY_SIZE(inst_fw_cap_sm8650),
>>>> + .tz_cp_config_data = &tz_cp_config_sm8650,
>>>> + .core_arch = VIDEO_ARCH_LX,
>>>> + .hw_response_timeout = HW_RESPONSE_TIMEOUT_VALUE,
>>>> + .ubwc_config = &ubwc_config_sm8650,
>>>> + .num_vpp_pipe = 4,
>>>> + .max_session_count = 16,
>>>> + .max_core_mbpf = ((8192 * 4352) / 256) * 2,
>>>> + .input_config_params =
>>>> + sm8650_vdec_input_config_params,
>>>> + .input_config_params_size =
>>>> + ARRAY_SIZE(sm8650_vdec_input_config_params),
>>>> + .output_config_params =
>>>> + sm8650_vdec_output_config_params,
>>>> + .output_config_params_size =
>>>> + ARRAY_SIZE(sm8650_vdec_output_config_params),
>>>> + .dec_input_prop = sm8650_vdec_subscribe_input_properties,
>>>> + .dec_input_prop_size = ARRAY_SIZE(sm8650_vdec_subscribe_input_properties),
>>>> + .dec_output_prop = sm8650_vdec_subscribe_output_properties,
>>>> + .dec_output_prop_size =
>>>> ARRAY_SIZE(sm8650_vdec_subscribe_output_properties),
>>>> +
>>>> + .dec_ip_int_buf_tbl = sm8650_dec_ip_int_buf_tbl,
>>>> + .dec_ip_int_buf_tbl_size = ARRAY_SIZE(sm8650_dec_ip_int_buf_tbl),
>>>> + .dec_op_int_buf_tbl = sm8650_dec_op_int_buf_tbl,
>>>> + .dec_op_int_buf_tbl_size = ARRAY_SIZE(sm8650_dec_op_int_buf_tbl),
>>>> +};
>>>> diff --git a/drivers/media/platform/qcom/iris/iris_probe.c
>>>> b/drivers/media/platform/qcom/iris/iris_probe.c
>>>> index
>>>> aca442dcc153830e6252d1dca87afb38c0b9eb8f..8e6cc1dc529608696e81f2764e90ea3864030125 100644
>>>> --- a/drivers/media/platform/qcom/iris/iris_probe.c
>>>> +++ b/drivers/media/platform/qcom/iris/iris_probe.c
>>>> @@ -330,6 +330,10 @@ static const struct of_device_id iris_dt_match[] = {
>>>> .data = &sm8250_data,
>>>> },
>>>> #endif
>>>> + {
>>>> + .compatible = "qcom,sm8650-iris",
>>>> + .data = &sm8650_data,
>>>> + },
>>>> { },
>>>> };
>>>> MODULE_DEVICE_TABLE(of, iris_dt_match);
>>>>
>>
Powered by blists - more mailing lists