| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250304222309.29385-13-andre.przywara@arm.com>
Date: Tue, 4 Mar 2025 22:23:06 +0000
From: Andre Przywara <andre.przywara@....com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>
Cc: devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 12/15] arm64: dts: allwinner: a523: add X96Q-Pro+ support
The X96QPro+ is a TV box using the Allwinner H728 SoC. That SoC seems to
be a package variant of the A523 family, at least it uses the same SoC
ID and is compatible as far as we can assess.
It comes with the following specs:
- Allwinner H728 SoC: 8 Arm Cortex-A55 cores, Mali-G57 MC1 GPU
- 2 or 4GiB DDR3L DRAM
- 32, 64, or 128 GiB eMMC flash
- AXP717 + AXP323 PMICs
- Gigabit Ethernet (using MAXIO PHY)
- HDMI port
- 2 * USB 2.0 ports
- 1 * USB 3.0 port
- microSD card slot
- TOSLINK digital audio output
- 3.5mm A/V port
- infrared sensor
- 7-segment display
- 5V barrel plug power supply
- power button
The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. There is another set of UART pins
available. The board also features a FEL button (accessible through the
3.5mm socket) and a reset button (only accessible when case is open).
This .dts just describes the basic peripherals as far as we support them
at the moment. The PMIC rail assignments are reverse engineered as far
as possible, by dumping them from a running Android system, and correlating
them to other boards using the same SoC.
Signed-off-by: Andre Przywara <andre.przywara@....com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun55i-h728-x96qpro+.dts | 287 ++++++++++++++++++
2 files changed, 288 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 0d678a7499e3c..983be49ea6ef8 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -52,4 +52,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
new file mode 100644
index 0000000000000..c0bce3f4fa925
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "X96Q Pro+";
+ compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ext_osc32k: ext-osc32k-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply from the barrel plug */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ /* 3.3V dummy supply for the SD card */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_vcc5v>;
+ regulator-always-on;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_DOWN)>; /* PF6 */
+ bus-width = <4>;
+ disable-wp;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_cldo3>;
+ vqmmc-supply = <®_cldo1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <®_cldo3>; /* via VCC-IO */
+ vcc-pc-supply = <®_cldo1>;
+ vcc-pd-supply = <®_dcdc4>;
+ vcc-pe-supply = <®_dcdc4>;
+ vcc-pf-supply = <®_cldo3>; /* actually switchable */
+ vcc-pg-supply = <®_bldo1>;
+ vcc-ph-supply = <®_cldo3>; /* via VCC-IO */
+ vcc-pi-supply = <®_dcdc4>;
+ vcc-pj-supply = <®_dcdc4>;
+ vcc-pk-supply = <®_bldo3>;
+};
+
+&r_i2c0 {
+ status = "okay";
+
+ axp717: pmic@34 {
+ compatible = "x-powers,axp717";
+ reg = <0x34>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+ vin4-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ /* Supplies the "little" cluster (1.0(?) GHz cores) */
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vdd-cpul";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <920000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_dcdc4: dcdc4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd-dcdc4";
+ };
+
+ reg_aldo1: aldo1 {
+ /* not connected */
+ };
+
+ reg_aldo2: aldo2 {
+ /* not connected */
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-aldo3";
+ };
+
+ reg_aldo4: aldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pll-dxco-avcc";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg-wifi-lvds";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dram-1v8";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-bldo3";
+ };
+
+ reg_bldo4: bldo4 {
+ /* not connected */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-codec-sd";
+ };
+
+ reg_cldo2: cldo2 {
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-codec-eth-sd";
+ };
+
+ reg_cldo4: cldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-eth-phy";
+ };
+
+ reg_cpusldo: cpusldo {
+ /* supplies the management core */
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-cpus";
+ };
+ };
+ };
+
+ axp323: pmic@36 {
+ compatible = "x-powers,axp323";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+
+ regulators {
+ aldo1 {
+ /* not connected */
+ };
+
+ dldo1 {
+ /* not connected */
+ };
+
+ /* Supplies the "big" cluster (1.8 GHz cores) */
+ reg_dcdc1_323: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vdd-cpub";
+ };
+
+ /* DCDC2 is polyphased with DCDC1 */
+
+ reg_dcdc3_323: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-name = "vdd-dcdc3";
+ };
+ };
+ };
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ * vcc-pl-supply = <®_aldo3>;
+ */
+ vcc-pm-supply = <®_aldo3>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ /* USB0 is a USB-A receptacle, always powered, so force host mode. */
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--
2.46.3
Powered by blists - more mailing lists