[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Z8hweDIy0AuxzBRR@lizhi-Precision-Tower-5810>
Date: Wed, 5 Mar 2025 10:40:40 -0500
From: Frank Li <Frank.li@....com>
To: Stefan Eichenberger <eichest@...il.com>
Cc: vkoul@...nel.org, kishon@...nel.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
p.zabel@...gutronix.de, tharvey@...eworks.com, hongxing.zhu@....com,
francesco.dolcini@...adex.com, linux-phy@...ts.infradead.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Stefan Eichenberger <stefan.eichenberger@...adex.com>
Subject: Re: [PATCH v2 1/2] phy: freescale: imx8m-pcie: cleanup reset logic
On Wed, Mar 05, 2025 at 03:43:15PM +0100, Stefan Eichenberger wrote:
> From: Stefan Eichenberger <stefan.eichenberger@...adex.com>
>
> Remove the switch statement and base perst release on whether it is
> found in the device tree. The probe function fails without the reset
> property, making it mandatory. Therefore, always release reset
> independent of the variant.
Thanks for clean up this.
"Remove the switch statement for releasing 'perst' and 'reset' since they
are already correctly set at probe and are no-ops for
reset_control_deassert(NULL). Call these unconditionally."
Reviewed-by: Frank Li <Frank.Li@....com>
>
> This does not change the behavior of the driver but reduces driver
> complexity and allows for easier future modifications.
>
> Signed-off-by: Stefan Eichenberger <stefan.eichenberger@...adex.com>
> ---
> drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 12 +++---------
> 1 file changed, 3 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> index e98361dcdeadf..5b505e34ca364 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> @@ -141,15 +141,9 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
> IMX8MM_GPR_PCIE_REF_CLK_PLL);
> usleep_range(100, 200);
>
> - switch (imx8_phy->drvdata->variant) {
> - case IMX8MP:
> - reset_control_deassert(imx8_phy->perst);
> - fallthrough;
> - case IMX8MM:
> - reset_control_deassert(imx8_phy->reset);
> - usleep_range(200, 500);
> - break;
> - }
> + reset_control_deassert(imx8_phy->perst);
> + reset_control_deassert(imx8_phy->reset);
> + usleep_range(200, 500);
>
> /* Do the PHY common block reset */
> regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> --
> 2.45.2
>
Powered by blists - more mailing lists