linux-kernel - Re: [PATCH v2 11/15] arm64: dts: allwinner: a523: add Avaota-A1 router support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2224762.Mh6RI2rZIc@jernej-laptop>
Date: Wed, 05 Mar 2025 19:48:59 +0100
From: Jernej Škrabec <jernej.skrabec@...il.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
 Samuel Holland <samuel@...lland.org>, Andre Przywara <andre.przywara@....com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject:
 Re: [PATCH v2 11/15] arm64: dts: allwinner: a523: add Avaota-A1 router
 support

Dne torek, 4. marec 2025 ob 23:23:05 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> The Avaota A1 router board is an Open Source hardware board, designed
> by YuzukiHD. Pine64 produces some boards and sells them. It uses the
> Allwinner A527 or T527 SoC, and comes with the following features:
>   - Eight ARM Cortex-A55 cores, Mali-G57 MC1 GPU
>   - 1GiB/2GiB/4GiB LPDDR4 DRAM
>   - AXP717 + AXP323 PMIC
>   - Raspberry-Pi-2 compatible GPIO header
>   - 1 USB 2.0 type A host port, 1 USB 3.0 type A host post
>   - 1 USB 2.0 type C port (OTG + serial debug)
>   - MicroSD slot
>   - eMMC between 16 and 128 GiB
>   - on-board 16MiB bootable SPI NOR flash
>   - two 1Gbps Ethernet ports (via RTL8211F PHYs)
>   - HDMI port
>   - DP port
>   - camera and LCD connectors
>   - 3.5mm headphone jack
>   - (yet) unsupported WiFi/BT chip
>   - 1.3" LC display, connected via SPI
>   - 12 V barrel plug for power supply
> 
> Add the devicetree file describing the currently supported features.
> 
> Signed-off-by: Andre Przywara <andre.przywara@....com>

Acked-by: Jernej Skrabec <jernej.skrabec@...il.com>

Best regards,
Jernej