| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250305053823.2048217-6-peter.chen@cixtech.com>
Date: Wed, 5 Mar 2025 13:38:22 +0800
From: Peter Chen <peter.chen@...tech.com>
To: robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
catalin.marinas@....com,
will@...nel.org,
arnd@...db.de
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
cix-kernel-upstream@...tech.com,
marcin@...zkiewicz.com.pl,
Peter Chen <peter.chen@...tech.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Fugang Duan <fugang.duan@...tech.com>
Subject: [PATCH v4 5/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support
CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech,
and Orion O6 is open source motherboard launched by Radxa.
See below for detail:
https://docs.radxa.com/en/orion/o6/getting-started/introduction
In this commit, it only adds limited components for running initramfs
at Orion O6.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Acked-by: Fugang Duan <fugang.duan@...tech.com>
Signed-off-by: Peter Chen <peter.chen@...tech.com>
---
Changes for v4:
- Add ppi-partition entry for gic-v3 node, and let pmu-a520 and pmu-a720's interrupt entry
get its handle
- Remove gic-v3's #redistributor-regions and redistributor-stride properties
- Change gic-v3's #interrupt-cells as 4, and change all interrupt specifiers accordingly
- Remove "arm,no-tick-in-suspend" for timer due to global counter is at always-on power domain
- Remove timer's clock frequency due to firmware has already set it
- Add Krzysztof Kozlowski's reviewed-by
Changes for v3:
- Fix two dts coding sytle issues
Changes for v2:
- Corrects the SoF tag's name
- Fix several coding sytle issues
- move linux,cma node to dts file
- delete memory node, memory size is passed by firmware
- delete uart2 node which will be added in future patches
- Improve for pmu and cpu node to stands for more specific cpu model
- Improve the timer node and add hypervisor virtual timer irq
- Pass "make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb"
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/cix/Makefile | 2 +
arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 26 +++
arch/arm64/boot/dts/cix/sky1.dtsi | 222 ++++++++++++++++++++++
4 files changed, 251 insertions(+)
create mode 100644 arch/arm64/boot/dts/cix/Makefile
create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 79b73a21ddc2..8e7ccd0027bd 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -13,6 +13,7 @@ subdir-y += bitmain
subdir-y += blaize
subdir-y += broadcom
subdir-y += cavium
+subdir-y += cix
subdir-y += exynos
subdir-y += freescale
subdir-y += hisilicon
diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
new file mode 100644
index 000000000000..ed3713982012
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
new file mode 100644
index 000000000000..78f4fcd87216
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+ model = "Radxa Orion O6";
+ compatible = "radxa,orion-o6", "cix,sky1";
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x28000000>;
+ linux,cma-default;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
new file mode 100644
index 000000000000..5c5a2d1144c1
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x200>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x300>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu4: cpu@400 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x400>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu5: cpu@500 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x500>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu6: cpu@600 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x600>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu7: cpu@700 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x700>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu8: cpu@800 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x800>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu9: cpu@900 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x900>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu10: cpu@a00 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0xa00>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu11: cpu@b00 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0xb00>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ core4 {
+ cpu = <&cpu4>;
+ };
+ core5 {
+ cpu = <&cpu5>;
+ };
+ core6 {
+ cpu = <&cpu6>;
+ };
+ core7 {
+ cpu = <&cpu7>;
+ };
+ core8 {
+ cpu = <&cpu8>;
+ };
+ core9 {
+ cpu = <&cpu9>;
+ };
+ core10 {
+ cpu = <&cpu10>;
+ };
+ core11 {
+ cpu = <&cpu11>;
+ };
+ };
+ };
+ };
+
+ pmu-a520 {
+ compatible = "arm,cortex-a520-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+ };
+
+ pmu-a720 {
+ compatible = "arm,cortex-a720-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+ };
+
+ pmu-spe {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ ranges = <0 0 0 0 0x20 0>;
+ dma-ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic: interrupt-controller@...0000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x0e010000 0 0x10000>, /* GICD */
+ <0x0 0x0e090000 0 0x300000>; /* GICR * 12 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
+ #interrupt-cells = <4>;
+ interrupt-controller;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@...0000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x0e050000 0x0 0x30000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ ppi-partitions {
+ ppi_partition0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+
+ ppi_partition1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>;
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+};
--
2.25.1
Powered by blists - more mailing lists