[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <lim35p2lwwo7uelex6co72hvwskawmevgibzfdqk5av7cur6g7@wqyenx5jzgxb>
Date: Thu, 6 Mar 2025 19:04:48 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: Caleb Connolly <caleb.connolly@...aro.org>, broonie@...nel.org,
perex@...ex.cz, tiwai@...e.com, krzysztof.kozlowski@...aro.org,
linux-sound@...r.kernel.org, linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
johan+linaro@...nel.org
Subject: Re: [PATCH v3 0/6] ASoC: q6apm: fix under runs and fragment sizes
On Thu, Mar 06, 2025 at 01:15:43PM +0000, Srinivas Kandagatla wrote:
>
>
> On 05/03/2025 22:17, Caleb Connolly wrote:
> > Hi Srini,
> >
> > On 3/4/25 10:57, srinivas.kandagatla@...aro.org wrote:
> > > From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> > >
> > > On Qualcomm Audioreach setup, some of the audio artifacts are seen in
> > > both recording and playback. These patches fix issues by
> > > 1. Adjusting the fragment size that dsp can service.
> > > 2. schedule available playback buffers in time for dsp to not hit
> > > under runs
> > > 3. remove some of the manual calculations done to get hardware pointer.
> > >
> > > With these patches, am able to see Audio quality improvements.
> > >
> > > Any testing would be appreciated.
> >
> > This totally breaks audio on SDM845, and often results in a hard-crash
> > to crashdump mode on my OnePlus 6.
>
> Its not possible.. as SDM845 is Elite DSP architecture, all of these patches
> changes are very specific to Audioreach DSP architecture.
>
> Could you please share the crash logs if you have any. It highly likely that
> something else is triggering the hard-crash that you reported.
I will try reproducing this on RB3 today in the evening.
>
> thanks,
> Srini
> >
> > Unfortunately I can't get UART logs right now. But I imagine this is
> > reproducible on RB3.
> >
> > Kind regards,
> > >
> > > thanks,
> > > Srini
> > >
> > > Changes since v2:
> > > - dropped patch which is causing regression with pluseaudio.
> > > - setup period sizes only for capture path
> > > - fix underruns/overruns in dsp pipelines.
> > > - add fixes tag
> > > - add patch to fix buffer alignment
> > >
> > > Changes since v1:
> > > - added new patches to fix the fragment size, pointer
> > > calculations
> > > - updated to schedule only available buffers.
> > >
> > > Srinivas Kandagatla (6):
> > > ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs
> > > ASoC: q6apm: add q6apm_get_hw_pointer helper
> > > ASoC: q6apm-dai: make use of q6apm_get_hw_pointer
> > > ASoC: qdsp6: q6apm-dai: set correct period and buffer alignment.
> > > ASoC: qdsp6: q6apm-dai: fix capture pipeline overruns.
> > > ASoC: qdsp6: q6apm-dai: fix playback dsp pipeline underruns
> > >
> > > sound/soc/qcom/qdsp6/q6apm-dai.c | 63 +++++++++++++++++---------------
> > > sound/soc/qcom/qdsp6/q6apm.c | 18 ++++++++-
> > > sound/soc/qcom/qdsp6/q6apm.h | 3 ++
> > > 3 files changed, 53 insertions(+), 31 deletions(-)
> > >
> >
--
With best wishes
Dmitry
Powered by blists - more mailing lists