linux-kernel - [PATCH 4/4] arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250306221402.1704196-5-jonas@kwiboo.se>
Date: Thu,  6 Mar 2025 22:13:57 +0000
From: Jonas Karlman <jonas@...boo.se>
To: Heiko Stuebner <heiko@...ech.de>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>
Cc: Yao Zi <ziyao@...root.org>,
	linux-rockchip@...ts.infradead.org,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	Jonas Karlman <jonas@...boo.se>
Subject: [PATCH 4/4] arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C

The Radxa E20C has two GbE ports, LAN and WAN. The LAN port is provided
using a GMAC controller and a YT8531C PHY and the WAN port is provided
by an RTL8111H PCIe Ethernet controller.

Enable support for the LAN port on Radxa E20C.

Signed-off-by: Jonas Karlman <jonas@...boo.se>
---
 .../boot/dts/rockchip/rk3528-radxa-e20c.dts   | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index a511e2a2d4a5..61ba0471095a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -16,6 +16,7 @@ / {
 	compatible = "radxa,e20c", "rockchip,rk3528";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
@@ -123,7 +124,36 @@ vccio_sd: regulator-vccio-sd {
 	};
 };
 
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gpio-keys {
 		user_key: user-key {
 			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
-- 
2.48.1