| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<OSBPR01MB2775DFC184F78E9FB50F28FFFFD52@OSBPR01MB2775.jpnprd01.prod.outlook.com>
Date: Fri, 7 Mar 2025 15:14:05 +0000
From: John Madieu <john.madieu.xa@...renesas.com>
To: Conor Dooley <conor@...nel.org>
CC: "geert+renesas@...der.be" <geert+renesas@...der.be>,
"magnus.damm@...il.com" <magnus.damm@...il.com>, "mturquette@...libre.com"
<mturquette@...libre.com>, "sboyd@...nel.org" <sboyd@...nel.org>,
"rafael@...nel.org" <rafael@...nel.org>, "daniel.lezcano@...aro.org"
<daniel.lezcano@...aro.org>, "rui.zhang@...el.com" <rui.zhang@...el.com>,
"lukasz.luba@....com" <lukasz.luba@....com>, "robh@...nel.org"
<robh@...nel.org>, "krzk+dt@...nel.org" <krzk+dt@...nel.org>,
"conor+dt@...nel.org" <conor+dt@...nel.org>, "p.zabel@...gutronix.de"
<p.zabel@...gutronix.de>, "catalin.marinas@....com"
<catalin.marinas@....com>, "will@...nel.org" <will@...nel.org>,
"john.madieu@...il.com" <john.madieu@...il.com>,
"linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, Biju Das <biju.das.jz@...renesas.com>
Subject: RE: [PATCH v2 3/7] dt-bindings: thermal: r9a09g047-tsu: Document the
TSU unit
Hi Conor,
Thanks for your review!
> -----Original Message-----
> From: Conor Dooley <conor@...nel.org>
> Sent: Friday, February 28, 2025 8:03 PM
> To: John Madieu <john.madieu.xa@...renesas.com>
> Subject: Re: [PATCH v2 3/7] dt-bindings: thermal: r9a09g047-tsu: Document
> the TSU unit
>
> On Thu, Feb 27, 2025 at 01:24:39PM +0100, John Madieu wrote:
> > The Renesas RZ/G3E SoC includes a Thermal Sensor Unit (TSU) block
> > designed to measure the junction temperature. The device provides
> > real-time temperature measurements for thermal management, utilizing a
> > single dedicated channel (channel 1) for temperature sensing.
> >
> > Signed-off-by: John Madieu <john.madieu.xa@...renesas.com>
> > ---
> > v1 -> v2:
> > * Fix reg property specifier to get rid of yamlint warnings
> > * Fix IRQ name to reflect TSU expectations
> >
> > .../thermal/renesas,r9a09g047-tsu.yaml | 123 ++++++++++++++++++
> > 1 file changed, 123 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
> > new file mode 100644
> > index 000000000000..e786561ddbe3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.
> > +++ yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/thermal/renesas,r9a09g047-tsu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G3E Temperature Sensor Unit (TSU)
> > +
> > +maintainers:
> > + - John Madieu <john.madieu.xa@...renesas.com>
> > +
> > +description:
> > + The Temperature Sensor Unit (TSU) is an integrated thermal sensor
> > +that
> > + monitors the chip temperature on the Renesas RZ/G3E SoC. The TSU
> > +provides
> > + real-time temperature measurements for thermal management.
> > +
> > +properties:
> > + compatible:
> > + const: renesas,r9a09g047-tsu
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + interrupts:
> > + description: |
> > + Interrupt specifiers for the TSU:
> > + - S12TSUADI1: Conversion complete interrupt signal (pulse)
> > + - S12TSUADCMPI1: Comparison result interrupt signal (level)
> > +
> > + interrupt-names:
> > + items:
> > + - const: adi
> > + - const: adcmpi
> > +
> > + "#thermal-sensor-cells":
> > + const: 0
> > +
> > + renesas,tsu-calibration-sys:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: |
> > + Phandle to the system controller (sys) that contains the TSU
> > + calibration values used for temperature calculations.
> > +
> > + renesas,tsu-operating-mode:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [0, 1]
> > + description: |
> > + TSU operating mode:
> > + 0: Mode 0 - Conversion started by software
> > + 1: Mode 1 - Conversion started by ELC trigger
>
> Can you make this "software" and "elc" or something please, unless people
> will genuinely find "0" and 1" to be more informative.
> And why doesn't the property have a default?
Sorry for miss-specifying.
ELC is an external event trigger. May be should I specify it like that ?
To make sure I got your point, do you mean specifying a default value in
bindings ?
>
> cheers,
> Conor.
Regards,
John
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - resets
> > + - power-domains
> > + - interrupts
> > + - interrupt-names
> > + - "#thermal-sensor-cells"
> > + - renesas,tsu-operating-mode
> > + - renesas,tsu-calibration-sys
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + tsu: thermal@...02000 {
> > + compatible = "renesas,r9a09g047-tsu";
> > + reg = <0x14002000 0x1000>;
> > + clocks = <&cpg CPG_MOD 0x10a>;
> > + resets = <&cpg 0xf8>;
> > + power-domains = <&cpg>;
> > + interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "adi", "adcmpi";
> > + #thermal-sensor-cells = <0>;
> > + renesas,tsu-operating-mode = <0>;
> > + renesas,tsu-calibration-sys = <&sys>;
> > + };
> > +
> > + thermal-zones {
> > + cpu-thermal {
> > + polling-delay = <1000>;
> > + polling-delay-passive = <250>;
> > + thermal-sensors = <&tsu>;
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&target>;
> > + cooling-device = <&cpu0 0 3>, <&cpu1 0 3>,
> > + <&cpu2 0 3>, <&cpu3 0 3>;
> > + contribution = <1024>;
> > + };
> > + };
> > +
> > + trips {
> > + target: trip-point {
> > + temperature = <95000>;
> > + hysteresis = <1000>;
> > + type = "passive";
> > + };
> > +
> > + sensor_crit: sensor-crit {
> > + temperature = <120000>;
> > + hysteresis = <1000>;
> > + type = "critical";
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.25.1
> >
Powered by blists - more mailing lists