linux-kernel - [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: add support for volume-up key

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250307171222.7470-2-johan+linaro@kernel.org>
Date: Fri,  7 Mar 2025 18:12:21 +0100
From: Johan Hovold <johan+linaro@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>
Cc: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: add support for volume-up key

Add support for the keypad volume-up key on the debug extension board.

This is useful to have when testing PMIC interrupt handling, and the key
can also be used to wake up from deep suspend states (CX shutdown).

Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 arch/arm64/boot/dts/qcom/x1-crd.dtsi | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index 296b41409ad1..0b62fdc85478 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -52,9 +52,16 @@ chosen {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-0 = <&hall_int_n_default>, <&kypd_vol_up_n>;
 		pinctrl-names = "default";
 
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
 		switch-lid {
 			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -876,6 +883,16 @@ &pcie6a_phy {
 	status = "okay";
 };
 
+&pm8550_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-pull-up;
+		input-enable;
+	};
+};
+
 &pm8550ve_8_gpios {
 	misc_3p3_reg_en: misc-3p3-reg-en-state {
 		pins = "gpio6";
-- 
2.45.3